display5: Add missing environment.h include to avoid warning

Without this change the following warning shows up when building:

board/liebherr/display5/display5.c:270:3:
warning: implicit declaratio

display5: Add missing environment.h include to avoid warning

Without this change the following warning shows up when building:

board/liebherr/display5/display5.c:270:3:
warning: implicit declaration of function ‘eth_env_set_enetaddr’ [-Wimplicit-function-declaration]

This commit fixes this issue.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

show more ...

display5: net: Add function to read ethaddr from iMX6 fuses

Signed-off-by: Lukasz Majewski <lukma@denx.de>

display5: ddr: Enable support for DDR3 auto calibration

This code performs DDR3 memory calibration for display5 board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

display5: wdt: Enable WDT support (both SPL and u-boot)

Test case:

The fitImage gets corrupted:

truncate -c -s 3M fitImage
run tftp_mmc_fitImg
setenv boot_os y
reset

[board shall hang in SPL with

display5: wdt: Enable WDT support (both SPL and u-boot)

Test case:

The fitImage gets corrupted:

truncate -c -s 3M fitImage
run tftp_mmc_fitImg
setenv boot_os y
reset

[board shall hang in SPL with
"Trying to boot from MMC1" information]

Then after X seconds WDT is causing board to reset. After N boot attempts
we enter recovery mode.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

show more ...

display5: Support for the emergency PAD pressing

To enter the special mode, one needs to short cut two pads with e.g. screw
driver.

After power up the SPL will execute u-boot in which proper action

display5: Support for the emergency PAD pressing

To enter the special mode, one needs to short cut two pads with e.g. screw
driver.

After power up the SPL will execute u-boot in which proper actions will be
taken.

It is worth noting that we do not alter envs (even the BOOT_FROM variable)
and unconditionally go to recovery.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

show more ...

display5: spl: Check return code of the env_* functions

Force booting through u-boot proper when environment error encountered
(as a result of either broken SPI-NOR or erased envs).

Signed-off-by:

display5: spl: Check return code of the env_* functions

Force booting through u-boot proper when environment error encountered
(as a result of either broken SPI-NOR or erased envs).

Signed-off-by: Lukasz Majewski <lukma@denx.de>

show more ...

bootcount: display5: spl: Extend DISPLAY5 board SPL to support bootcount checking

This patch is necessary for providing basic bootcount checking in the case
of using "falcon" boot mode in that board

bootcount: display5: spl: Extend DISPLAY5 board SPL to support bootcount checking

This patch is necessary for providing basic bootcount checking in the case
of using "falcon" boot mode in that board.

It forces u-boot proper boot, when we exceed the number of errors.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...