1if OMAP54XX 2 3config DRA7XX 4 bool 5 help 6 DRA7xx is an OMAP based SOC with Dual Core A-15s. 7 8choice 9 prompt "OMAP5 board select" 10 optional 11 12config TARGET_CL_SOM_AM57X 13 bool "CompuLab CL-SOM-AM57x" 14 select DRA7XX 15 16config TARGET_CM_T54 17 bool "CompuLab CM-T54" 18 19config TARGET_OMAP5_UEVM 20 bool "TI OMAP5 uEVM board" 21 22config TARGET_DRA7XX_EVM 23 bool "TI DRA7XX" 24 select BOARD_LATE_INIT 25 select DRA7XX 26 select TI_I2C_BOARD_DETECT 27 select PHYS_64BIT 28 imply SCSI 29 30config TARGET_AM57XX_EVM 31 bool "AM57XX" 32 select BOARD_LATE_INIT 33 select DRA7XX 34 select TI_I2C_BOARD_DETECT 35 imply SCSI 36 37endchoice 38 39config SYS_SOC 40 default "omap5" 41 42config TI_SECURE_EMIF_REGION_START 43 hex "Reserved EMIF region start address" 44 depends on TI_SECURE_DEVICE 45 default 0x0 46 help 47 Reserved EMIF region start address. Set to "0" to auto-select 48 to be at the end of the external memory region. 49 50config TI_SECURE_EMIF_TOTAL_REGION_SIZE 51 hex "Reserved EMIF region size" 52 depends on TI_SECURE_DEVICE 53 default 0x0 54 help 55 Total reserved EMIF region size. Default is 0, which means no reserved EMIF 56 region on secure devices. 57 58config TI_SECURE_EMIF_PROTECTED_REGION_SIZE 59 hex "Size of protected region within reserved EMIF region" 60 depends on TI_SECURE_DEVICE 61 default 0x0 62 help 63 This config option is used to specify the size of the portion of the total 64 reserved EMIF region set aside for secure OS needs that will be protected 65 using hardware memory firewalls. This value must be smaller than the 66 TI_SECURE_EMIF_TOTAL_REGION_SIZE value. 67 68config OMAP_PLATFORM_RESET_TIME_MAX_USEC 69 int "Something" 70 range 0 31219 71 default 31219 72 help 73 Most OMAPs' provide a way to specify the time for which the reset 74 should be held low while the voltages and Oscillator outputs 75 stabilize. 76 This time is mostly board and PMIC dependent. Hence the boards are 77 expected to specify a pre-computed time using the above option. 78 This value can be computed using a summation of the below 3 79 parameters 80 1: Time taken by the Osciallator to stop and restart 81 2: PMIC OTP time 82 3: Voltage ramp time, which can be derived using the PMIC slew rate 83 and value of voltage ramp needed. 84 85if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM 86menu "Voltage Domain OPP selections" 87 88choice 89 prompt "MPU Voltage Domain" 90 default DRA7_MPU_OPP_NOM 91 help 92 Select the Operating Performance Point(OPP) for the MPU voltage 93 domain on DRA7xx & AM57xx SoCs. 94 95config DRA7_MPU_OPP_NOM 96 bool "OPP NOM" 97 help 98 This config option enables Normal OPP for MPU. This is the safest 99 option for booting. 100 101endchoice 102 103choice 104 prompt "DSPEVE Voltage Domain" 105 help 106 Select the Operating Performance Point(OPP) for the DSPEVE voltage 107 domain on DRA7xx & AM57xx SoCs. 108 109config DRA7_DSPEVE_OPP_NOM 110 bool "OPP NOM" 111 help 112 This config option enables Normal OPP for DSPEVE. This is the safest 113 option for booting and choose this when unsure about other OPPs . 114 115config DRA7_DSPEVE_OPP_OD 116 bool "OPP OD" 117 help 118 This config option enables Over drive OPP for DSPEVE. 119 120config DRA7_DSPEVE_OPP_HIGH 121 bool "OPP HIGH" 122 help 123 This config option enables High OPP for DSPEVE. 124 125endchoice 126 127choice 128 prompt "IVA Voltage Domain" 129 help 130 Select the Operating Performance Point(OPP) for the IVA voltage 131 domain on DRA7xx & AM57xx SoCs. 132 133config DRA7_IVA_OPP_NOM 134 bool "OPP NOM" 135 help 136 This config option enables Normal OPP for IVA. This is the safest 137 option for booting and choose this when unsure about other OPPs . 138 139config DRA7_IVA_OPP_OD 140 bool "OPP OD" 141 help 142 This config option enables Over drive OPP for IVA. 143 144config DRA7_IVA_OPP_HIGH 145 bool "OPP HIGH" 146 help 147 This config option enables High OPP for IVA. 148 149endchoice 150 151choice 152 prompt "GPU Voltage Domain" 153 help 154 Select the Operating Performance Point(OPP) for the GPU voltage 155 domain on DRA7xx & AM57xx SoCs. 156 157config DRA7_GPU_OPP_NOM 158 bool "OPP NOM" 159 help 160 This config option enables Normal OPP for GPU. This is the safest 161 option for booting and choose this when unsure about other OPPs . 162 163config DRA7_GPU_OPP_OD 164 bool "OPP OD" 165 help 166 This config option enables Over drive OPP for GPU. 167 168config DRA7_GPU_OPP_HIGH 169 bool "OPP HIGH" 170 help 171 This config option enables High OPP for GPU. 172 173endchoice 174 175endmenu 176endif 177 178source "board/compulab/cl-som-am57x/Kconfig" 179source "board/compulab/cm_t54/Kconfig" 180source "board/ti/omap5_uevm/Kconfig" 181source "board/ti/dra7xx/Kconfig" 182source "board/ti/am57xx/Kconfig" 183 184endif 185