1 /* 2 * U-Boot - Configuration file for Cirrus Logic EDB93xx boards 3 */ 4 5 #ifndef __CONFIG_H 6 #define __CONFIG_H 7 8 #ifdef CONFIG_MK_edb9301 9 #define CONFIG_EDB9301 10 #elif defined(CONFIG_MK_edb9302) 11 #define CONFIG_EDB9302 12 #elif defined(CONFIG_MK_edb9302a) 13 #define CONFIG_EDB9302A 14 #elif defined(CONFIG_MK_edb9307) 15 #define CONFIG_EDB9307 16 #elif defined(CONFIG_MK_edb9307a) 17 #define CONFIG_EDB9307A 18 #elif defined(CONFIG_MK_edb9312) 19 #define CONFIG_EDB9312 20 #elif defined(CONFIG_MK_edb9315) 21 #define CONFIG_EDB9315 22 #elif defined(CONFIG_MK_edb9315a) 23 #define CONFIG_EDB9315A 24 #else 25 #error "no board defined" 26 #endif 27 28 /* Initial environment and monitor configuration options. */ 29 #define CONFIG_CMDLINE_TAG 1 30 #define CONFIG_INITRD_TAG 1 31 #define CONFIG_SETUP_MEMORY_TAGS 1 32 #define CONFIG_BOOTFILE "edb93xx.img" 33 34 #define CONFIG_SYS_LDSCRIPT "board/cirrus/edb93xx/u-boot.lds" 35 36 #ifdef CONFIG_EDB9301 37 #define CONFIG_EP9301 38 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9301 39 #define CONFIG_ENV_SECT_SIZE 0x00020000 40 #elif defined(CONFIG_EDB9302) 41 #define CONFIG_EP9302 42 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9302 43 #define CONFIG_ENV_SECT_SIZE 0x00020000 44 #elif defined(CONFIG_EDB9302A) 45 #define CONFIG_EP9302 46 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A 47 #define CONFIG_ENV_SECT_SIZE 0x00020000 48 #elif defined(CONFIG_EDB9307) 49 #define CONFIG_EP9307 50 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9307 51 #define CONFIG_ENV_SECT_SIZE 0x00040000 52 #elif defined(CONFIG_EDB9307A) 53 #define CONFIG_EP9307 54 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A 55 #define CONFIG_ENV_SECT_SIZE 0x00020000 56 #elif defined(CONFIG_EDB9312) 57 #define CONFIG_EP9312 58 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9312 59 #define CONFIG_ENV_SECT_SIZE 0x00040000 60 #elif defined(CONFIG_EDB9315) 61 #define CONFIG_EP9315 62 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9315 63 #define CONFIG_ENV_SECT_SIZE 0x00040000 64 #elif defined(CONFIG_EDB9315A) 65 #define CONFIG_EP9315 66 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A 67 #define CONFIG_ENV_SECT_SIZE 0x00020000 68 #else 69 #error "no board defined" 70 #endif 71 72 /* High-level configuration options */ 73 #define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */ 74 75 #define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ 76 77 /* Monitor configuration */ 78 79 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ 80 81 /* Serial port hardware configuration */ 82 #define CONFIG_CONS_INDEX 0 83 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, \ 84 115200, 230400} 85 #define CONFIG_SYS_SERIAL0 0x808C0000 86 #define CONFIG_SYS_SERIAL1 0x808D0000 87 /*#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ 88 (void *)CONFIG_SYS_SERIAL1} */ 89 90 #define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0} 91 92 /* Status LED */ 93 /* Optional value */ 94 95 /* Network hardware configuration */ 96 #define CONFIG_DRIVER_EP93XX_MAC 97 #define CONFIG_MII_SUPPRESS_PREAMBLE 98 #define CONFIG_MII 99 #define CONFIG_PHY_ADDR 1 100 #undef CONFIG_NETCONSOLE 101 102 /* SDRAM configuration */ 103 #if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \ 104 defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \ 105 defined(CONFIG_EDB9315) 106 /* 107 * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 108 * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set 109 * the SROMLL bit on the processor, resulting in this non-contiguous memory map. 110 * 111 * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of 112 * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 113 * 64 MB of SDRAM. 114 */ 115 116 #define CONFIG_EDB93XX_SDCS3 117 118 #elif defined(CONFIG_EDB9302A) || \ 119 defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A) 120 /* 121 * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 122 * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set 123 * the SROMLL bit on the processor, resulting in this non-contiguous memory map. 124 * 125 * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung 126 * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM. 127 */ 128 #define CONFIG_EDB93XX_SDCS0 129 130 #else 131 #error "no SDCS configuration for this board" 132 #endif 133 134 #if defined(CONFIG_EDB93XX_SDCS3) 135 #define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Default load address */ 136 #define PHYS_SDRAM_1 0x00000000 137 #elif defined(CONFIG_EDB93XX_SDCS0) 138 #define CONFIG_SYS_LOAD_ADDR 0xc1000000 /* Default load address */ 139 #define PHYS_SDRAM_1 0xc0000000 140 #endif 141 142 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 143 #define CONFIG_NR_DRAM_BANKS 8 144 145 #define CONFIG_SYS_INIT_SP_ADDR \ 146 (CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE) 147 148 /* Must match kernel config */ 149 #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) 150 151 /* Run-time memory allocatons */ 152 #define CONFIG_SYS_GBL_DATA_SIZE 128 153 154 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) 155 156 /* ----------------------------------------------------------------------------- 157 * FLASH and environment organization 158 * 159 * The EDB9301, EDB9302(a), EDB9307a, EDB9315a have 1 bank of flash memory at 160 * 0x60000000 consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit 161 * data bus, for a total of 16 MB of CFI-compatible flash. 162 * 163 * The EDB9307, EDB9312, and EDB9315 have 1 bank of flash memory at 164 * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit 165 * data bus, for a total of 32 MB of CFI-compatible flash. 166 * 167 * 168 * EDB9301/02(a)7a/15a EDB9307/12/15 169 * 0x60000000 - 0x0003FFFF u-boot u-boot 170 * 0x60040000 - 0x0005FFFF environment #1 environment #1 171 * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued) 172 * 0x60080000 - 0x0009FFFF unused environment #2 173 * 0x600A0000 - 0x000BFFFF unused environment #2 (continued) 174 * 0x600C0000 - 0x00FFFFFF unused unused 175 * 0x61000000 - 0x01FFFFFF not present unused 176 */ 177 #define CONFIG_SYS_FLASH_CFI 178 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 179 180 #define CONFIG_SYS_FLASH_PROTECTION 181 #define CONFIG_FLASH_CFI_DRIVER 182 #define CONFIG_SYS_MAX_FLASH_BANKS 1 183 #define CONFIG_SYS_MAX_FLASH_SECT (256+8) 184 185 #define PHYS_FLASH_1 CONFIG_SYS_TEXT_BASE 186 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE 187 188 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 189 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 190 191 #define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */ 192 193 #define CONFIG_ENV_ADDR 0x60040000 194 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) 195 196 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 197 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 198 199 #define CONFIG_USB_OHCI_NEW 200 #define CONFIG_USB_OHCI_EP93XX 201 #define CONFIG_SYS_USB_OHCI_CPU_INIT 202 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 203 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ep93xx-ohci" 204 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x80020000 205 206 /* Define to disable flash configuration*/ 207 /* #define CONFIG_EP93XX_NO_FLASH_CFG */ 208 209 /* Define this for indusrial rated chips */ 210 /* #define CONFIG_EDB93XX_INDUSTRIAL */ 211 212 #endif /* !defined (__CONFIG_H) */ 213