1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Qualcomm APQ8016 based Dragonboard 410C board device tree source 4 * 5 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com> 6 */ 7 8/dts-v1/; 9 10#include "skeleton64.dtsi" 11 12/ { 13 model = "Qualcomm Technologies, Inc. Dragonboard 410c"; 14 compatible = "qcom,dragonboard", "qcom,apq8016-sbc"; 15 qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>; 16 qcom,board-id = <0x10018 0x0>; 17 #address-cells = <0x2>; 18 #size-cells = <0x2>; 19 20 memory { 21 device_type = "memory"; 22 reg = <0 0x80000000 0 0x3da00000>; 23 }; 24 25 reserved-memory { 26 #address-cells = <2>; 27 #size-cells = <2>; 28 ranges; 29 }; 30 31 chosen { 32 stdout-path = "/soc/serial@78b0000"; 33 }; 34 35 soc { 36 #address-cells = <0x1>; 37 #size-cells = <0x1>; 38 ranges = <0x0 0x0 0x0 0xffffffff>; 39 compatible = "simple-bus"; 40 41 clkc: qcom,gcc@1800000 { 42 compatible = "qcom,gcc-apq8016"; 43 reg = <0x1800000 0x80000>; 44 #address-cells = <0x1>; 45 #size-cells = <0x0>; 46 }; 47 48 serial@78b0000 { 49 compatible = "qcom,msm-uartdm-v1.4"; 50 reg = <0x78b0000 0x200>; 51 u-boot,dm-pre-reloc; 52 clock = <&clkc 4>; 53 }; 54 55 soc_gpios: pinctrl@1000000 { 56 compatible = "qcom,apq8016-pinctrl"; 57 reg = <0x1000000 0x300000>; 58 gpio-controller; 59 gpio-count = <122>; 60 gpio-bank-name="soc"; 61 #gpio-cells = <1>; 62 }; 63 64 ehci@78d9000 { 65 compatible = "qcom,ehci-host"; 66 reg = <0x78d9000 0x400>; 67 }; 68 69 sdhci@07824000 { 70 compatible = "qcom,sdhci-msm-v4"; 71 reg = <0x7824900 0x11c 0x7824000 0x800>; 72 bus-width = <0x8>; 73 index = <0x0>; 74 non-removable; 75 clock = <&clkc 0>; 76 clock-frequency = <100000000>; 77 }; 78 79 sdhci@07864000 { 80 compatible = "qcom,sdhci-msm-v4"; 81 reg = <0x7864900 0x11c 0x7864000 0x800>; 82 index = <0x1>; 83 bus-width = <0x4>; 84 clock = <&clkc 1>; 85 clock-frequency = <200000000>; 86 }; 87 88 wcnss { 89 bt { 90 compatible="qcom,wcnss-bt"; 91 }; 92 93 wifi { 94 compatible="qcom,wcnss-wlan"; 95 }; 96 }; 97 98 spmi@200f000 { 99 compatible = "qcom,spmi-pmic-arb"; 100 reg = <0x200f800 0x200 0x2400000 0x400000 0x2c00000 0x400000>; 101 #address-cells = <0x1>; 102 #size-cells = <0x1>; 103 pmic0: pm8916@0 { 104 compatible = "qcom,spmi-pmic"; 105 reg = <0x0 0x1>; 106 #address-cells = <0x1>; 107 #size-cells = <0x1>; 108 109 pm8916_pon: pm8916_pon@800 { 110 compatible = "qcom,pm8916-pwrkey"; 111 reg = <0x800 0x96>; 112 #gpio-cells = <2>; 113 gpio-controller; 114 }; 115 116 pm8916_gpios: pm8916_gpios@c000 { 117 compatible = "qcom,pm8916-gpio"; 118 reg = <0xc000 0x400>; 119 gpio-controller; 120 gpio-count = <4>; 121 #gpio-cells = <2>; 122 gpio-bank-name="pmic"; 123 }; 124 }; 125 126 pmic1: pm8916@1 { 127 compatible = "qcom,spmi-pmic"; 128 reg = <0x1 0x1>; 129 }; 130 }; 131 }; 132 133 leds { 134 compatible = "gpio-leds"; 135 user1 { 136 label = "green:user1"; 137 gpios = <&soc_gpios 21 0>; 138 }; 139 140 user2 { 141 label = "green:user2"; 142 gpios = <&soc_gpios 120 0>; 143 }; 144 145 user3 { 146 label = "green:user3"; 147 gpios = <&pm8916_gpios 0 0>; 148 }; 149 150 user4 { 151 label = "green:user4"; 152 gpios = <&pm8916_gpios 1 0>; 153 }; 154 }; 155}; 156 157#include "dragonboard410c-uboot.dtsi" 158