imx: ventana: added support for 16bit 8Gb density (1GiB) DRAM

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: hexdump invalid EEPROM data

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+)

device-tree paths should never be used that reference node addresses
making an assumption about leading zeros. They should not be th

imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+)

device-tree paths should never be used that reference node addresses
making an assumption about leading zeros. They should not be there per
the device-tree specification however they have been there until Linux
4.15 when they were removed via kernel commit
8dccafaa281aa1d240a58bbcdff338aec114a021.

This fixes various issues which will occur when using Linux 4.15+
that are being fixed up on a per model per PCB revision basis such as:
- enabling MMC UHS-I on board revisions that support it
- enabling PWM based on hwconfig
- fixing PCIe reset on GW552x
- removing cpu external watchdog reset on boards that do not support it
- populate PCI dt nodes based on PCI scan in order to fix GW16082
interrupt mapping and inject MAC address for PCI based GbE

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: gw5904/gw5909: disable RS485

The GW5904/GW5909 have a SP33E multi-protocol serial transceiver which we
want to configure to RS232 by default (by de-asserting RS485_EN)

Signed-off-by:

imx: ventana: gw5904/gw5909: disable RS485

The GW5904/GW5909 have a SP33E multi-protocol serial transceiver which we
want to configure to RS232 by default (by de-asserting RS485_EN)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: add support for GW5901/GW5902

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: add support for GW5909

The GW5909 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW5904 but with half the DRAM loaded
and an additional R

imx: ventana: add support for GW5909

The GW5909 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW5904 but with half the DRAM loaded
and an additional RS232 transceiver off UART2.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: add support for GW5908

The GW5908 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW530x but with 1GiB density DRAM
(64bit 512MiB).

Signe

imx: ventana: add support for GW5908

The GW5908 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW530x but with 1GiB density DRAM
(64bit 512MiB).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: add support for GW5907

The GW5907 is a small single board computer based on the i.MX6DL SoC
with the following peripheral set:
- DDR3 memory (512MB default)
- 1x GigE (i.MX6 FEC)
-

imx: ventana: add support for GW5907

The GW5907 is a small single board computer based on the i.MX6DL SoC
with the following peripheral set:
- DDR3 memory (512MB default)
- 1x GigE (i.MX6 FEC)
- Gateworks System Controller

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: add support for GW5906

The GW5906 is a GW552x with mechanical and power supply connector
differences.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: add i2c detect for all LVDS displays

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: skip nand init for nandless boards

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: add support for Z101WX01 LVDS display

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: add support for GW5905

The GW5905 is single-board tablet computer based on the i.MX6 SoC with the
following peripheral set:
- eMMC flash (boot device)
- microSD expansion
- LVDS dis

imx: ventana: add support for GW5905

The GW5905 is single-board tablet computer based on the i.MX6 SoC with the
following peripheral set:
- eMMC flash (boot device)
- microSD expansion
- LVDS display connector for off-board 3D+1C with PWM backlight
and I2C based touch controller
- MIPI camera connector supporting the TRULY CM8487-B500SA-E (OV5640)
- ublox EMMY-W1 WiFi/Bluetooth/NFC module (SDIO/UART)
- ublox ZOE-M8Q GPS
- LSM9DS1 9-DOF IMU
- 1x 1-lane miniPCIe socket with USB 2.0
- Gateworks System Controller
- Audio jack with TLV320AIC Audio Codec, Speaker AMP
and TSA227E Headphone detect
- MAX8607 3-mode LED camera flash
- DECT ULE module
- FUSB302 USB-C PD and ISL9238 Battery charger

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: remove setup of I2C3 from SPL

Do not setup I2C3 in the SPL for Ventana as some devices on that bus
(aic3x codecs) can hang the bus causing i2c_setup to spin endlessly until
they are pu

imx: ventana: remove setup of I2C3 from SPL

Do not setup I2C3 in the SPL for Ventana as some devices on that bus
(aic3x codecs) can hang the bus causing i2c_setup to spin endlessly until
they are put into reset. Removing the setup of I2C3 from the SPL allows
the board-specific GPIO to be configured to take care of putting codecs
in reset prior to U-Boot setting up I2C3.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: do not iomux UART1

The only UART that is garunteed on Ventana boards is UART2 (serial-console).

Remove UART1 pinmux as that it is not consistent across all Ventana boards
and U-Boot d

imx: ventana: do not iomux UART1

The only UART that is garunteed on Ventana boards is UART2 (serial-console).

Remove UART1 pinmux as that it is not consistent across all Ventana boards
and U-Boot doesn't need it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: mv88e61xx change LED configuration

Signed-off-by: Tim Harvey <tharvey@gateworks.com>