SPDX: Convert all of our single license tags to Linux Kernel styleWhen U-Boot started using SPDX tags we were among the early adopters andthere weren't a lot of other examples to borrow from. So
SPDX: Convert all of our single license tags to Linux Kernel styleWhen U-Boot started using SPDX tags we were among the early adopters andthere weren't a lot of other examples to borrow from. So we picked thearea of the file that usually had a full license text and replaced itwith an appropriate SPDX-License-Identifier: entry. Since then, theLinux Kernel has adopted SPDX tags and they place it as the very firstline in a file (except where shebangs are used, then it's second line)and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibilityand in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declaredlicense in the tag as both the before and after are identical in tagcontents. There's also a few places where I found we did not have a tagand have introduced one.Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRWe have a large number of places where while we historically referencedgd in the code we no longer do, as well as cases where the code added
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRWe have a large number of places where while we historically referencedgd in the code we no longer do, as well as cases where the code addedthat line "just in case" during development and never dropped it.Signed-off-by: Tom Rini <trini@konsulko.com>
libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Thomas reported U-Boot failed to build host tools if libfdt-develpackage is installed because tools include libfdt headers from/us
libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Thomas reported U-Boot failed to build host tools if libfdt-develpackage is installed because tools include libfdt headers from/usr/include/ instead of using internal ones.This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.hand replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h>Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
drivers/misc: Share qbman init between archsThis patch adds changes necessary to move functionality present inPowerPC folders with ARM architectures that have DPAA1 QBMan hardware- Create new bo
drivers/misc: Share qbman init between archsThis patch adds changes necessary to move functionality present inPowerPC folders with ARM architectures that have DPAA1 QBMan hardware- Create new board/freescale/common/fsl_portals.c to house shared device tree fixups for DPAA1 devices with ARM and PowerPC cores- Add new header file to top includes directory to allow files in both architectures to grab the function prototypes- Port inhibit_portals() from PowerPC to ARM. This function is used in setup to disable interrupts on all QMan and BMan portals. It is needed because the interrupts are enabled by default for all portals including unused/uninitialised portals. When the kernel attempts to go to deep sleep the unused portals prevent it from doing soSigned-off-by: Ahmed Mansour <ahmed.mansour@nxp.com>Reviewed-by: York Sun <york.sun@nxp.com>
powerpc: mpc85xx: Fix static TLB table for SDRAMMost predefined TLB tables don't have memory coherence bit set forSDRAM. This wasn't an issue before invalidate_dcache_range() functionwas enabled.
powerpc: mpc85xx: Fix static TLB table for SDRAMMost predefined TLB tables don't have memory coherence bit set forSDRAM. This wasn't an issue before invalidate_dcache_range() functionwas enabled. Without the coherence bit, dcache invalidation doesn'tautomatically flush the cache. The coherence bit is already set whendynamic TLB table is used. For some boards with different SPL bootmethod, or with legacy fixed setting, this bit needs to be set inTLB files.Signed-off-by: York Sun <york.sun@nxp.com>
env: Rename some other getenv()-related functionsWe are now using an env_ prefix for environment functions. Rename theseother functions as well, for consistency: getenv_vlan() getenv_bootm_
env: Rename some other getenv()-related functionsWe are now using an env_ prefix for environment functions. Rename theseother functions as well, for consistency: getenv_vlan() getenv_bootm_size() getenv_bootm_low() getenv_bootm_mapsize() env_get_default()Suggested-by: Wolfgang Denk <wd@denx.de>Signed-off-by: Simon Glass <sjg@chromium.org>
usb: fsl: Rename fdt_fixup_dr_usbThe function fdt_fixup_dr_usb is specific to fsl/nxp. So,make the function name explicit and rename fdt_fixup_dr_usbinto fsl_fdt_fixup_dr_usb.Signed-off-by: Sri
usb: fsl: Rename fdt_fixup_dr_usbThe function fdt_fixup_dr_usb is specific to fsl/nxp. So,make the function name explicit and rename fdt_fixup_dr_usbinto fsl_fdt_fixup_dr_usb.Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
net: Move some header files to include/The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARMand PPC, move it out of ppc to include/, and change the path indrivers accordingly.Sign
net: Move some header files to include/The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARMand PPC, move it out of ppc to include/, and change the path indrivers accordingly.Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>Reviewed-by: York Sun <yorksun@freescale.com>
fdt: Allow ft_board_setup() to report failureThis function can fail if the device tree runs out of space. Rather thansilently booting with an incomplete device tree, allow the failure to bedetect
fdt: Allow ft_board_setup() to report failureThis function can fail if the device tree runs out of space. Rather thansilently booting with an incomplete device tree, allow the failure to bedetected.Unfortunately this involves changing a lot of places in the code. I havenot changed behvaiour to return an error where one is not currentlyreturned, to avoid unexpected breakage.Eventually it would be nice to allow boards to register functions to becalled to update the device tree. This would avoid all the many functionsto do this. However it's not clear yet if this should be done using drivermodel or with a linker list. This work is left for later.Signed-off-by: Simon Glass <sjg@chromium.org>Acked-by: Anatolij Gustschin <agust@denx.de>
MAINTAINERS: comment out blank M: fieldSince commit ddaf5c8f3030050fcd356a1e49e3ee8f8f52c6d4(patman: RunPipe() should not pipe stdout/stderr unless asked),Patman spits lots of "Invalid MAINTAINER
MAINTAINERS: comment out blank M: fieldSince commit ddaf5c8f3030050fcd356a1e49e3ee8f8f52c6d4(patman: RunPipe() should not pipe stdout/stderr unless asked),Patman spits lots of "Invalid MAINTAINERS address: '-'"error messages for patches with global changes.It takes too long for Patman to process them.Anyway, "M: -" does not carry any important information.Rather, it is just like a place holder in case of assigninga new board maintainer. Let's comment out.This commit can be reproduced by the following command:find . -name MAINTAINERS | xargs sed -i -e '/^M:[[:blank:]]*-$/s/^/#/'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in arch and board Kconfig files.This commit can be easily reproduced by the following command:find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string//}'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS for
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS format as in Linux Kernel would be nicebecause we can crib the scripts/get_maintainer.pl script.After some discussion, we chose to put a MAINTAINERS file under eachboard directory, not the top-level one because we want to collectrelevant information for a board into a single place.TODO:Modify get_maintainer.pl to scan multiple MAINTAINERS files.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Suggested-by: Tom Rini <trini@ti.com>Acked-by: Simon Glass <sjg@chromium.org>
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board(This commit was automatically generated by a conversion scriptbased on boards.cfg)In Linux Kernel, defconfig files are located underarch/${ARCH}/configs/ directory.It works in Linux Kernel since ARCH is always given from thecommand line for cross compile.But in U-Boot, ARCH is not given from the command line.Which means we cannot know ARCH until the board configuration is done.That is why all the "*_defconfig" files should be gathered into asingle directory ./configs/.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Acked-by: Simon Glass <sjg@chromium.org>
powerpc/mpc85xx: Check return value of find_tlb_idxfind_tlb_idx() is called in board_early_init_r() on multiple boards.The return value is not checked before being used to disable a TLB.In normal
powerpc/mpc85xx: Check return value of find_tlb_idxfind_tlb_idx() is called in board_early_init_r() on multiple boards.The return value is not checked before being used to disable a TLB.In normal case the return value wouldn't be -1. In case of a mis-configuration during porting to a new board, checking the return valuemay be helpful to reveal some user errors.Signed-off-by: York Sun <yorksun@freescale.com>
Driver/DDR: Moving Freescale DDR driver to a common driverFreescale DDR driver has been used for mpc83xx, mpc85xx, mpc86xx SoCs.The similar DDR controllers will be used for ARM-based SoCs.Signed
Driver/DDR: Moving Freescale DDR driver to a common driverFreescale DDR driver has been used for mpc83xx, mpc85xx, mpc86xx SoCs.The similar DDR controllers will be used for ARM-based SoCs.Signed-off-by: York Sun <yorksun@freescale.com>
board: powerpc: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Wolfgang Denk <wd@denx.de>Cc: Kim Phillips <kim.phillips@freescale.com>Cc: York Sun
board: powerpc: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Wolfgang Denk <wd@denx.de>Cc: Kim Phillips <kim.phillips@freescale.com>Cc: York Sun <yorksun@freescale.com>Cc: Stefan Roese <sr@denx.de>
powerpc: Fix CamelCase warnings in DDR related codeSome DDR related structures present in fsl_ddr_dimm_params.h, fsl_ddr_sdram.h, ddr_spd.hhas various parameters with embedded acronyms capitalized
powerpc: Fix CamelCase warnings in DDR related codeSome DDR related structures present in fsl_ddr_dimm_params.h, fsl_ddr_sdram.h, ddr_spd.hhas various parameters with embedded acronyms capitalized that trigger the CamelCasewarning in checkpatch.plConvert those variable names to smallcase naming convention and modify all fileswhich are using these structures with modified structures.Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Coding Style cleanup: remove trailing empty linesSigned-off-by: Wolfgang Denk <wd@denx.de>
Add GPL-2.0+ SPDX-License-Identifier to source filesSigned-off-by: Wolfgang Denk <wd@denx.de>[trini: Fixup common/cmd_io.c]Signed-off-by: Tom Rini <trini@ti.com>
powerpc/85xx: Add P1023RDB board supportP1023RDB Specification:-----------------------Memory subsystem: 512MB DDR3 (Fixed DDR on board) 64MB NOR flash 128MB NAND flashEthernet: eTSE
powerpc/85xx: Add P1023RDB board supportP1023RDB Specification:-----------------------Memory subsystem: 512MB DDR3 (Fixed DDR on board) 64MB NOR flash 128MB NAND flashEthernet: eTSEC1: Connected to Atheros AR8035 GETH PHY eTSEC2: Connected to Atheros AR8035 GETH PHYPCIe: Three mini-PCIe slotsUSB: Two USB2.0 Type A portsI2C: AT24C08 8K Board EEPROM (8 bit address)Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>Cc: Scott Wood <scottwood@freescale.com>Signed-off-by: Andy Fleming <afleming@freescale.com>