1 /* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 MPC8349E-mITX and MPC8349E-mITX-GP board configuration file 9 10 Memory map: 11 12 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) 13 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) 14 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) 15 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) 16 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) 17 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) 18 0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only) 19 0xF001_0000-0xF001_FFFF Local bus expansion slot 20 0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only) 21 0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory 22 0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only) 23 24 I2C address list: 25 Align. Board 26 Bus Addr Part No. Description Length Location 27 ---------------------------------------------------------------- 28 I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 29 30 I2C1 0x20 PCF8574 I2C Expander 0 U8 31 I2C1 0x21 PCF8574 I2C Expander 0 U10 32 I2C1 0x38 PCF8574A I2C Expander 0 U8 33 I2C1 0x39 PCF8574A I2C Expander 0 U10 34 I2C1 0x51 (DDR) DDR EEPROM 1 U1 35 I2C1 0x68 DS1339 RTC 1 U68 36 37 Note that a given board has *either* a pair of 8574s or a pair of 8574As. 38 */ 39 40 #ifndef __CONFIG_H 41 #define __CONFIG_H 42 43 #if (CONFIG_SYS_TEXT_BASE == 0xFE000000) 44 #define CONFIG_SYS_LOWBOOT 45 #endif 46 47 /* 48 * High Level Configuration Options 49 */ 50 #define CONFIG_MPC83xx 1 51 #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ 52 #define CONFIG_MPC8349 /* MPC8349 specific */ 53 54 #ifndef CONFIG_SYS_TEXT_BASE 55 #define CONFIG_SYS_TEXT_BASE 0xFEF00000 56 #endif 57 58 #define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ 59 60 #define CONFIG_MISC_INIT_F 61 #define CONFIG_MISC_INIT_R 62 63 /* 64 * On-board devices 65 */ 66 67 #ifdef CONFIG_MPC8349ITX 68 /* The CF card interface on the back of the board */ 69 #define CONFIG_COMPACT_FLASH 70 #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ 71 #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ 72 #define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ 73 #endif 74 75 #define CONFIG_PCI 76 #define CONFIG_RTC_DS1337 77 #define CONFIG_HARD_I2C 78 #define CONFIG_TSEC_ENET /* TSEC Ethernet support */ 79 80 /* 81 * Device configurations 82 */ 83 84 /* I2C */ 85 #ifdef CONFIG_HARD_I2C 86 87 #define CONFIG_FSL_I2C 88 #define CONFIG_I2C_MULTI_BUS 89 #define CONFIG_SYS_I2C_OFFSET 0x3000 90 #define CONFIG_SYS_I2C2_OFFSET 0x3100 91 #define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */ 92 #define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ 93 94 #define CONFIG_SYS_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ 95 #define CONFIG_SYS_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ 96 #define CONFIG_SYS_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ 97 #define CONFIG_SYS_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ 98 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ 99 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ 100 #define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ 101 102 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 103 #define CONFIG_SYS_I2C_SLAVE 0x7F 104 105 /* Don't probe these addresses: */ 106 #define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \ 107 {1, CONFIG_SYS_I2C_8574_ADDR2}, \ 108 {1, CONFIG_SYS_I2C_8574A_ADDR1}, \ 109 {1, CONFIG_SYS_I2C_8574A_ADDR2} } 110 /* Bit definitions for the 8574[A] I2C expander */ 111 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ 112 #define I2C_8574_REVISION 0x03 113 #define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ 114 #define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ 115 #define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ 116 #define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ 117 118 #undef CONFIG_SOFT_I2C 119 120 #endif 121 122 /* Compact Flash */ 123 #ifdef CONFIG_COMPACT_FLASH 124 125 #define CONFIG_SYS_IDE_MAXBUS 1 126 #define CONFIG_SYS_IDE_MAXDEVICE 1 127 128 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 129 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_CF_BASE 130 #define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 131 #define CONFIG_SYS_ATA_REG_OFFSET 0 132 #define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 133 #define CONFIG_SYS_ATA_STRIDE 2 134 135 /* If a CF card is not inserted, time out quickly */ 136 #define ATA_RESET_TIME 1 137 138 #endif 139 140 /* 141 * SATA 142 */ 143 #ifdef CONFIG_SATA_SIL3114 144 145 #define CONFIG_SYS_SATA_MAX_DEVICE 4 146 #define CONFIG_LIBATA 147 #define CONFIG_LBA48 148 149 #endif 150 151 #ifdef CONFIG_SYS_USB_HOST 152 /* 153 * Support USB 154 */ 155 #define CONFIG_CMD_USB 156 #define CONFIG_USB_STORAGE 157 #define CONFIG_USB_EHCI 158 #define CONFIG_USB_EHCI_FSL 159 160 /* Current USB implementation supports the only USB controller, 161 * so we have to choose between the MPH or the DR ones */ 162 #if 1 163 #define CONFIG_HAS_FSL_MPH_USB 164 #else 165 #define CONFIG_HAS_FSL_DR_USB 166 #endif 167 168 #endif 169 170 /* 171 * DDR Setup 172 */ 173 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ 174 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 175 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 176 #define CONFIG_SYS_83XX_DDR_USES_CS0 177 #define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */ 178 #define CONFIG_SYS_MEMTEST_END 0x2000 179 180 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ 181 | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) 182 183 #define CONFIG_VERY_BIG_RAM 184 #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20) 185 186 #ifdef CONFIG_HARD_I2C 187 #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ 188 #endif 189 190 /* No SPD? Then manually set up DDR parameters */ 191 #ifndef CONFIG_SPD_EEPROM 192 #define CONFIG_SYS_DDR_SIZE 256 /* Mb */ 193 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ 194 | CSCONFIG_ROW_BIT_13 \ 195 | CSCONFIG_COL_BIT_10) 196 197 #define CONFIG_SYS_DDR_TIMING_1 0x26242321 198 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ 199 #endif 200 201 /* 202 *Flash on the Local Bus 203 */ 204 205 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 206 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 207 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ 208 #define CONFIG_SYS_FLASH_EMPTY_INFO 209 /* 127 64KB sectors + 8 8KB sectors per device */ 210 #define CONFIG_SYS_MAX_FLASH_SECT 135 211 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 212 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 213 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 214 215 /* The ITX has two flash chips, but the ITX-GP has only one. To support both 216 boards, we say we have two, but don't display a message if we find only one. */ 217 #define CONFIG_SYS_FLASH_QUIET_TEST 218 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 219 #define CONFIG_SYS_FLASH_BANKS_LIST \ 220 {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} 221 #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ 222 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 223 224 /* Vitesse 7385 */ 225 226 #ifdef CONFIG_VSC7385_ENET 227 228 #define CONFIG_TSEC2 229 230 /* The flash address and size of the VSC7385 firmware image */ 231 #define CONFIG_VSC7385_IMAGE 0xFEFFE000 232 #define CONFIG_VSC7385_IMAGE_SIZE 8192 233 234 #endif 235 236 /* 237 * BRx, ORx, LBLAWBARx, and LBLAWARx 238 */ 239 240 /* Flash */ 241 242 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ 243 | BR_PS_16 \ 244 | BR_MS_GPCM \ 245 | BR_V) 246 #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ 247 | OR_UPM_XAM \ 248 | OR_GPCM_CSNT \ 249 | OR_GPCM_ACS_DIV2 \ 250 | OR_GPCM_XACS \ 251 | OR_GPCM_SCY_15 \ 252 | OR_GPCM_TRLX_SET \ 253 | OR_GPCM_EHTR_SET \ 254 | OR_GPCM_EAD) 255 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE 256 #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) 257 258 /* Vitesse 7385 */ 259 260 #define CONFIG_SYS_VSC7385_BASE 0xF8000000 261 262 #ifdef CONFIG_VSC7385_ENET 263 264 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE \ 265 | BR_PS_8 \ 266 | BR_MS_GPCM \ 267 | BR_V) 268 #define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ 269 | OR_GPCM_CSNT \ 270 | OR_GPCM_XACS \ 271 | OR_GPCM_SCY_15 \ 272 | OR_GPCM_SETA \ 273 | OR_GPCM_TRLX_SET \ 274 | OR_GPCM_EHTR_SET \ 275 | OR_GPCM_EAD) 276 277 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE 278 #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) 279 280 #endif 281 282 /* LED */ 283 284 #define CONFIG_SYS_LED_BASE 0xF9000000 285 #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE \ 286 | BR_PS_8 \ 287 | BR_MS_GPCM \ 288 | BR_V) 289 #define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ 290 | OR_GPCM_CSNT \ 291 | OR_GPCM_ACS_DIV2 \ 292 | OR_GPCM_XACS \ 293 | OR_GPCM_SCY_9 \ 294 | OR_GPCM_TRLX_SET \ 295 | OR_GPCM_EHTR_SET \ 296 | OR_GPCM_EAD) 297 298 /* Compact Flash */ 299 300 #ifdef CONFIG_COMPACT_FLASH 301 302 #define CONFIG_SYS_CF_BASE 0xF0000000 303 304 #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \ 305 | BR_PS_16 \ 306 | BR_MS_UPMA \ 307 | BR_V) 308 #define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) 309 310 #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE 311 #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) 312 313 #endif 314 315 /* 316 * U-Boot memory configuration 317 */ 318 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 319 320 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 321 #define CONFIG_SYS_RAMBOOT 322 #else 323 #undef CONFIG_SYS_RAMBOOT 324 #endif 325 326 #define CONFIG_SYS_INIT_RAM_LOCK 327 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ 328 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ 329 330 #define CONFIG_SYS_GBL_DATA_OFFSET \ 331 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 332 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 333 334 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ 335 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ 336 #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ 337 338 /* 339 * Local Bus LCRR and LBCR regs 340 * LCRR: DLL bypass, Clock divider is 4 341 * External Local Bus rate is 342 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV 343 */ 344 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 345 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 346 #define CONFIG_SYS_LBC_LBCR 0x00000000 347 348 /* LB sdram refresh timer, about 6us */ 349 #define CONFIG_SYS_LBC_LSRT 0x32000000 350 /* LB refresh timer prescal, 266MHz/32*/ 351 #define CONFIG_SYS_LBC_MRTPR 0x20000000 352 353 /* 354 * Serial Port 355 */ 356 #define CONFIG_CONS_INDEX 1 357 #define CONFIG_SYS_NS16550 358 #define CONFIG_SYS_NS16550_SERIAL 359 #define CONFIG_SYS_NS16550_REG_SIZE 1 360 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 361 362 #define CONFIG_SYS_BAUDRATE_TABLE \ 363 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} 364 365 #define CONFIG_CONSOLE ttyS0 366 #define CONFIG_BAUDRATE 115200 367 368 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) 369 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) 370 371 /* pass open firmware flat tree */ 372 #define CONFIG_OF_LIBFDT 1 373 #define CONFIG_OF_BOARD_SETUP 1 374 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 375 376 /* 377 * PCI 378 */ 379 #ifdef CONFIG_PCI 380 #define CONFIG_PCI_INDIRECT_BRIDGE 381 382 #define CONFIG_MPC83XX_PCI2 383 384 /* 385 * General PCI 386 * Addresses are mapped 1-1. 387 */ 388 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 389 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 390 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 391 #define CONFIG_SYS_PCI1_MMIO_BASE \ 392 (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) 393 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE 394 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ 395 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 396 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 397 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */ 398 399 #ifdef CONFIG_MPC83XX_PCI2 400 #define CONFIG_SYS_PCI2_MEM_BASE \ 401 (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE) 402 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 403 #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ 404 #define CONFIG_SYS_PCI2_MMIO_BASE \ 405 (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE) 406 #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE 407 #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ 408 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 409 #define CONFIG_SYS_PCI2_IO_PHYS \ 410 (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE) 411 #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ 412 #endif 413 414 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 415 416 #ifndef CONFIG_PCI_PNP 417 #define PCI_ENET0_IOADDR 0x00000000 418 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE 419 #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ 420 #endif 421 422 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 423 424 #endif 425 426 #define CONFIG_PCI_66M 427 #ifdef CONFIG_PCI_66M 428 #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ 429 #else 430 #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ 431 #endif 432 433 /* TSEC */ 434 435 #ifdef CONFIG_TSEC_ENET 436 437 #define CONFIG_MII 438 #define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ 439 440 #define CONFIG_TSEC1 441 442 #ifdef CONFIG_TSEC1 443 #define CONFIG_HAS_ETH0 444 #define CONFIG_TSEC1_NAME "TSEC0" 445 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 446 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ 447 #define TSEC1_PHYIDX 0 448 #define TSEC1_FLAGS TSEC_GIGABIT 449 #endif 450 451 #ifdef CONFIG_TSEC2 452 #define CONFIG_HAS_ETH1 453 #define CONFIG_TSEC2_NAME "TSEC1" 454 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 455 456 #define TSEC2_PHY_ADDR 4 457 #define TSEC2_PHYIDX 0 458 #define TSEC2_FLAGS TSEC_GIGABIT 459 #endif 460 461 #define CONFIG_ETHPRIME "Freescale TSEC" 462 463 #endif 464 465 /* 466 * Environment 467 */ 468 #define CONFIG_ENV_OVERWRITE 469 470 #ifndef CONFIG_SYS_RAMBOOT 471 #define CONFIG_ENV_IS_IN_FLASH 472 #define CONFIG_ENV_ADDR \ 473 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 474 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ 475 #define CONFIG_ENV_SIZE 0x2000 476 #else 477 #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ 478 #undef CONFIG_FLASH_CFI_DRIVER 479 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 480 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 481 #define CONFIG_ENV_SIZE 0x2000 482 #endif 483 484 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 485 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 486 487 /* 488 * BOOTP options 489 */ 490 #define CONFIG_BOOTP_BOOTFILESIZE 491 #define CONFIG_BOOTP_BOOTPATH 492 #define CONFIG_BOOTP_GATEWAY 493 #define CONFIG_BOOTP_HOSTNAME 494 495 496 /* 497 * Command line configuration. 498 */ 499 #include <config_cmd_default.h> 500 501 #define CONFIG_CMD_CACHE 502 #define CONFIG_CMD_DATE 503 #define CONFIG_CMD_IRQ 504 #define CONFIG_CMD_NET 505 #define CONFIG_CMD_PING 506 #define CONFIG_CMD_DHCP 507 #define CONFIG_CMD_SDRAM 508 509 #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ 510 || defined(CONFIG_USB_STORAGE) 511 #define CONFIG_DOS_PARTITION 512 #define CONFIG_CMD_FAT 513 #define CONFIG_SUPPORT_VFAT 514 #endif 515 516 #ifdef CONFIG_COMPACT_FLASH 517 #define CONFIG_CMD_IDE 518 #endif 519 520 #ifdef CONFIG_SATA_SIL3114 521 #define CONFIG_CMD_SATA 522 #endif 523 524 #if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) 525 #define CONFIG_CMD_EXT2 526 #endif 527 528 #ifdef CONFIG_PCI 529 #define CONFIG_CMD_PCI 530 #endif 531 532 #ifdef CONFIG_HARD_I2C 533 #define CONFIG_CMD_I2C 534 #endif 535 536 /* Watchdog */ 537 #undef CONFIG_WATCHDOG /* watchdog disabled */ 538 539 /* 540 * Miscellaneous configurable options 541 */ 542 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 543 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 544 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 545 #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ 546 547 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 548 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 549 550 #ifdef CONFIG_MPC8349ITX 551 #define CONFIG_SYS_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ 552 #else 553 #define CONFIG_SYS_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */ 554 #endif 555 556 #if defined(CONFIG_CMD_KGDB) 557 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 558 #else 559 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 560 #endif 561 562 /* Print Buffer Size */ 563 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 564 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 565 /* Boot Argument Buffer Size */ 566 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 567 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 568 569 /* 570 * For booting Linux, the board info and command line data 571 * have to be in the first 256 MB of memory, since this is 572 * the maximum mapped by the Linux kernel during initialization. 573 */ 574 /* Initial Memory map for Linux*/ 575 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) 576 577 #define CONFIG_SYS_HRCW_LOW (\ 578 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 579 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 580 HRCWL_CSB_TO_CLKIN_4X1 |\ 581 HRCWL_VCO_1X2 |\ 582 HRCWL_CORE_TO_CSB_2X1) 583 584 #ifdef CONFIG_SYS_LOWBOOT 585 #define CONFIG_SYS_HRCW_HIGH (\ 586 HRCWH_PCI_HOST |\ 587 HRCWH_32_BIT_PCI |\ 588 HRCWH_PCI1_ARBITER_ENABLE |\ 589 HRCWH_PCI2_ARBITER_ENABLE |\ 590 HRCWH_CORE_ENABLE |\ 591 HRCWH_FROM_0X00000100 |\ 592 HRCWH_BOOTSEQ_DISABLE |\ 593 HRCWH_SW_WATCHDOG_DISABLE |\ 594 HRCWH_ROM_LOC_LOCAL_16BIT |\ 595 HRCWH_TSEC1M_IN_GMII |\ 596 HRCWH_TSEC2M_IN_GMII) 597 #else 598 #define CONFIG_SYS_HRCW_HIGH (\ 599 HRCWH_PCI_HOST |\ 600 HRCWH_32_BIT_PCI |\ 601 HRCWH_PCI1_ARBITER_ENABLE |\ 602 HRCWH_PCI2_ARBITER_ENABLE |\ 603 HRCWH_CORE_ENABLE |\ 604 HRCWH_FROM_0XFFF00100 |\ 605 HRCWH_BOOTSEQ_DISABLE |\ 606 HRCWH_SW_WATCHDOG_DISABLE |\ 607 HRCWH_ROM_LOC_LOCAL_16BIT |\ 608 HRCWH_TSEC1M_IN_GMII |\ 609 HRCWH_TSEC2M_IN_GMII) 610 #endif 611 612 /* 613 * System performance 614 */ 615 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ 616 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ 617 #define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ 618 #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ 619 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ 620 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ 621 #define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ 622 #define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */ 623 624 /* 625 * System IO Config 626 */ 627 /* Needed for gigabit to work on TSEC 1 */ 628 #define CONFIG_SYS_SICRH SICRH_TSOBI1 629 /* USB DR as device + USB MPH as host */ 630 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) 631 632 #define CONFIG_SYS_HID0_INIT 0x00000000 633 #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE 634 635 #define CONFIG_SYS_HID2 HID2_HBE 636 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 637 638 /* DDR */ 639 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ 640 | BATL_PP_RW \ 641 | BATL_MEMCOHERENCE) 642 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ 643 | BATU_BL_256M \ 644 | BATU_VS \ 645 | BATU_VP) 646 647 /* PCI */ 648 #ifdef CONFIG_PCI 649 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ 650 | BATL_PP_RW \ 651 | BATL_MEMCOHERENCE) 652 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ 653 | BATU_BL_256M \ 654 | BATU_VS \ 655 | BATU_VP) 656 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ 657 | BATL_PP_RW \ 658 | BATL_CACHEINHIBIT \ 659 | BATL_GUARDEDSTORAGE) 660 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ 661 | BATU_BL_256M \ 662 | BATU_VS \ 663 | BATU_VP) 664 #else 665 #define CONFIG_SYS_IBAT1L 0 666 #define CONFIG_SYS_IBAT1U 0 667 #define CONFIG_SYS_IBAT2L 0 668 #define CONFIG_SYS_IBAT2U 0 669 #endif 670 671 #ifdef CONFIG_MPC83XX_PCI2 672 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ 673 | BATL_PP_RW \ 674 | BATL_MEMCOHERENCE) 675 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ 676 | BATU_BL_256M \ 677 | BATU_VS \ 678 | BATU_VP) 679 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ 680 | BATL_PP_RW \ 681 | BATL_CACHEINHIBIT \ 682 | BATL_GUARDEDSTORAGE) 683 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ 684 | BATU_BL_256M \ 685 | BATU_VS \ 686 | BATU_VP) 687 #else 688 #define CONFIG_SYS_IBAT3L 0 689 #define CONFIG_SYS_IBAT3U 0 690 #define CONFIG_SYS_IBAT4L 0 691 #define CONFIG_SYS_IBAT4U 0 692 #endif 693 694 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ 695 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ 696 | BATL_PP_RW \ 697 | BATL_CACHEINHIBIT \ 698 | BATL_GUARDEDSTORAGE) 699 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ 700 | BATU_BL_256M \ 701 | BATU_VS \ 702 | BATU_VP) 703 704 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ 705 #define CONFIG_SYS_IBAT6L (0xF0000000 \ 706 | BATL_PP_RW \ 707 | BATL_MEMCOHERENCE \ 708 | BATL_GUARDEDSTORAGE) 709 #define CONFIG_SYS_IBAT6U (0xF0000000 \ 710 | BATU_BL_256M \ 711 | BATU_VS \ 712 | BATU_VP) 713 714 #define CONFIG_SYS_IBAT7L 0 715 #define CONFIG_SYS_IBAT7U 0 716 717 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 718 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 719 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 720 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 721 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 722 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 723 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 724 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 725 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 726 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 727 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 728 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 729 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 730 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 731 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 732 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 733 734 #if defined(CONFIG_CMD_KGDB) 735 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 736 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 737 #endif 738 739 740 /* 741 * Environment Configuration 742 */ 743 #define CONFIG_ENV_OVERWRITE 744 745 #define CONFIG_NETDEV "eth0" 746 747 #ifdef CONFIG_MPC8349ITX 748 #define CONFIG_HOSTNAME "mpc8349emitx" 749 #else 750 #define CONFIG_HOSTNAME "mpc8349emitxgp" 751 #endif 752 753 /* Default path and filenames */ 754 #define CONFIG_ROOTPATH "/nfsroot/rootfs" 755 #define CONFIG_BOOTFILE "uImage" 756 /* U-Boot image on TFTP server */ 757 #define CONFIG_UBOOTPATH "u-boot.bin" 758 759 #ifdef CONFIG_MPC8349ITX 760 #define CONFIG_FDTFILE "mpc8349emitx.dtb" 761 #else 762 #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" 763 #endif 764 765 #define CONFIG_BOOTDELAY 6 766 767 #define CONFIG_BOOTARGS \ 768 "root=/dev/nfs rw" \ 769 " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \ 770 " ip=" __stringify(CONFIG_IPADDR) ":" \ 771 __stringify(CONFIG_SERVERIP) ":" \ 772 __stringify(CONFIG_GATEWAYIP) ":" \ 773 __stringify(CONFIG_NETMASK) ":" \ 774 CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ 775 " console=" __stringify(CONFIG_CONSOLE) "," __stringify(CONFIG_BAUDRATE) 776 777 #define CONFIG_EXTRA_ENV_SETTINGS \ 778 "console=" __stringify(CONFIG_CONSOLE) "\0" \ 779 "netdev=" CONFIG_NETDEV "\0" \ 780 "uboot=" CONFIG_UBOOTPATH "\0" \ 781 "tftpflash=tftpboot $loadaddr $uboot; " \ 782 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 783 " +$filesize; " \ 784 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 785 " +$filesize; " \ 786 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 787 " $filesize; " \ 788 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 789 " +$filesize; " \ 790 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 791 " $filesize\0" \ 792 "fdtaddr=780000\0" \ 793 "fdtfile=" CONFIG_FDTFILE "\0" 794 795 #define CONFIG_NFSBOOTCOMMAND \ 796 "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \ 797 " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\ 798 " console=$console,$baudrate $othbootargs; " \ 799 "tftp $loadaddr $bootfile;" \ 800 "tftp $fdtaddr $fdtfile;" \ 801 "bootm $loadaddr - $fdtaddr" 802 803 #define CONFIG_RAMBOOTCOMMAND \ 804 "setenv bootargs root=/dev/ram rw" \ 805 " console=$console,$baudrate $othbootargs; " \ 806 "tftp $ramdiskaddr $ramdiskfile;" \ 807 "tftp $loadaddr $bootfile;" \ 808 "tftp $fdtaddr $fdtfile;" \ 809 "bootm $loadaddr $ramdiskaddr $fdtaddr" 810 811 #endif 812