1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2011, Marvell Semiconductor Inc. 4 * Lei Wen <leiwen@marvell.com> 5 * 6 * Back ported to the 8xx platform (from the 8260 platform) by 7 * Murray.Jensen@cmst.csiro.au, 27-Jan-01. 8 */ 9 #ifndef __SDHCI_HW_H 10 #define __SDHCI_HW_H 11 12 #include <asm/io.h> 13 #include <mmc.h> 14 #include <asm/gpio.h> 15 16 /* 17 * Controller registers 18 */ 19 20 #define SDHCI_DMA_ADDRESS 0x00 21 22 #define SDHCI_BLOCK_SIZE 0x04 23 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) 24 25 #define SDHCI_BLOCK_COUNT 0x06 26 27 #define SDHCI_ARGUMENT 0x08 28 29 #define SDHCI_TRANSFER_MODE 0x0C 30 #define SDHCI_TRNS_DMA BIT(0) 31 #define SDHCI_TRNS_BLK_CNT_EN BIT(1) 32 #define SDHCI_TRNS_ACMD12 BIT(2) 33 #define SDHCI_TRNS_READ BIT(4) 34 #define SDHCI_TRNS_MULTI BIT(5) 35 36 #define SDHCI_COMMAND 0x0E 37 #define SDHCI_CMD_RESP_MASK 0x03 38 #define SDHCI_CMD_CRC 0x08 39 #define SDHCI_CMD_INDEX 0x10 40 #define SDHCI_CMD_DATA 0x20 41 #define SDHCI_CMD_ABORTCMD 0xC0 42 43 #define SDHCI_CMD_RESP_NONE 0x00 44 #define SDHCI_CMD_RESP_LONG 0x01 45 #define SDHCI_CMD_RESP_SHORT 0x02 46 #define SDHCI_CMD_RESP_SHORT_BUSY 0x03 47 48 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) 49 #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) 50 51 #define SDHCI_RESPONSE 0x10 52 53 #define SDHCI_BUFFER 0x20 54 55 #define SDHCI_PRESENT_STATE 0x24 56 #define SDHCI_CMD_INHIBIT BIT(0) 57 #define SDHCI_DATA_INHIBIT BIT(1) 58 #define SDHCI_DOING_WRITE BIT(8) 59 #define SDHCI_DOING_READ BIT(9) 60 #define SDHCI_SPACE_AVAILABLE BIT(10) 61 #define SDHCI_DATA_AVAILABLE BIT(11) 62 #define SDHCI_CARD_PRESENT BIT(16) 63 #define SDHCI_CARD_STATE_STABLE BIT(17) 64 #define SDHCI_CARD_DETECT_PIN_LEVEL BIT(18) 65 #define SDHCI_WRITE_PROTECT BIT(19) 66 67 #define SDHCI_HOST_CONTROL 0x28 68 #define SDHCI_CTRL_LED BIT(0) 69 #define SDHCI_CTRL_4BITBUS BIT(1) 70 #define SDHCI_CTRL_HISPD BIT(2) 71 #define SDHCI_CTRL_DMA_MASK 0x18 72 #define SDHCI_CTRL_SDMA 0x00 73 #define SDHCI_CTRL_ADMA1 0x08 74 #define SDHCI_CTRL_ADMA32 0x10 75 #define SDHCI_CTRL_ADMA64 0x18 76 #define SDHCI_CTRL_8BITBUS BIT(5) 77 #define SDHCI_CTRL_CD_TEST_INS BIT(6) 78 #define SDHCI_CTRL_CD_TEST BIT(7) 79 80 #define SDHCI_POWER_CONTROL 0x29 81 #define SDHCI_POWER_ON 0x01 82 #define SDHCI_POWER_180 0x0A 83 #define SDHCI_POWER_300 0x0C 84 #define SDHCI_POWER_330 0x0E 85 86 #define SDHCI_BLOCK_GAP_CONTROL 0x2A 87 88 #define SDHCI_WAKE_UP_CONTROL 0x2B 89 #define SDHCI_WAKE_ON_INT BIT(0) 90 #define SDHCI_WAKE_ON_INSERT BIT(1) 91 #define SDHCI_WAKE_ON_REMOVE BIT(2) 92 93 #define SDHCI_CLOCK_CONTROL 0x2C 94 #define SDHCI_DIVIDER_SHIFT 8 95 #define SDHCI_DIVIDER_HI_SHIFT 6 96 #define SDHCI_DIV_MASK 0xFF 97 #define SDHCI_DIV_MASK_LEN 8 98 #define SDHCI_DIV_HI_MASK 0x300 99 #define SDHCI_PROG_CLOCK_MODE BIT(5) 100 #define SDHCI_CLOCK_CARD_EN BIT(2) 101 #define SDHCI_CLOCK_INT_STABLE BIT(1) 102 #define SDHCI_CLOCK_INT_EN BIT(0) 103 104 #define SDHCI_TIMEOUT_CONTROL 0x2E 105 106 #define SDHCI_SOFTWARE_RESET 0x2F 107 #define SDHCI_RESET_ALL 0x01 108 #define SDHCI_RESET_CMD 0x02 109 #define SDHCI_RESET_DATA 0x04 110 111 #define SDHCI_INT_STATUS 0x30 112 #define SDHCI_INT_ENABLE 0x34 113 #define SDHCI_SIGNAL_ENABLE 0x38 114 #define SDHCI_INT_RESPONSE BIT(0) 115 #define SDHCI_INT_DATA_END BIT(1) 116 #define SDHCI_INT_DMA_END BIT(3) 117 #define SDHCI_INT_SPACE_AVAIL BIT(4) 118 #define SDHCI_INT_DATA_AVAIL BIT(5) 119 #define SDHCI_INT_CARD_INSERT BIT(6) 120 #define SDHCI_INT_CARD_REMOVE BIT(7) 121 #define SDHCI_INT_CARD_INT BIT(8) 122 #define SDHCI_INT_ERROR BIT(15) 123 #define SDHCI_INT_TIMEOUT BIT(16) 124 #define SDHCI_INT_CRC BIT(17) 125 #define SDHCI_INT_END_BIT BIT(18) 126 #define SDHCI_INT_INDEX BIT(19) 127 #define SDHCI_INT_DATA_TIMEOUT BIT(20) 128 #define SDHCI_INT_DATA_CRC BIT(21) 129 #define SDHCI_INT_DATA_END_BIT BIT(22) 130 #define SDHCI_INT_BUS_POWER BIT(23) 131 #define SDHCI_INT_ACMD12ERR BIT(24) 132 #define SDHCI_INT_ADMA_ERROR BIT(25) 133 134 #define SDHCI_INT_NORMAL_MASK 0x00007FFF 135 #define SDHCI_INT_ERROR_MASK 0xFFFF8000 136 137 #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ 138 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) 139 #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ 140 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ 141 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ 142 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR) 143 #define SDHCI_INT_ALL_MASK ((unsigned int)-1) 144 145 #define SDHCI_ACMD12_ERR 0x3C 146 147 /* 3E-3F reserved */ 148 149 #define SDHCI_CAPABILITIES 0x40 150 #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F 151 #define SDHCI_TIMEOUT_CLK_SHIFT 0 152 #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 153 #define SDHCI_CLOCK_BASE_MASK 0x00003F00 154 #define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 155 #define SDHCI_CLOCK_BASE_SHIFT 8 156 #define SDHCI_MAX_BLOCK_MASK 0x00030000 157 #define SDHCI_MAX_BLOCK_SHIFT 16 158 #define SDHCI_CAN_DO_8BIT BIT(18) 159 #define SDHCI_CAN_DO_ADMA2 BIT(19) 160 #define SDHCI_CAN_DO_ADMA1 BIT(20) 161 #define SDHCI_CAN_DO_HISPD BIT(21) 162 #define SDHCI_CAN_DO_SDMA BIT(22) 163 #define SDHCI_CAN_VDD_330 BIT(24) 164 #define SDHCI_CAN_VDD_300 BIT(25) 165 #define SDHCI_CAN_VDD_180 BIT(26) 166 #define SDHCI_CAN_64BIT BIT(28) 167 168 #define SDHCI_CAPABILITIES_1 0x44 169 #define SDHCI_CLOCK_MUL_MASK 0x00FF0000 170 #define SDHCI_CLOCK_MUL_SHIFT 16 171 172 #define SDHCI_MAX_CURRENT 0x48 173 174 /* 4C-4F reserved for more max current */ 175 176 #define SDHCI_SET_ACMD12_ERROR 0x50 177 #define SDHCI_SET_INT_ERROR 0x52 178 179 #define SDHCI_ADMA_ERROR 0x54 180 181 /* 55-57 reserved */ 182 183 #define SDHCI_ADMA_ADDRESS 0x58 184 185 /* 60-FB reserved */ 186 187 #define SDHCI_SLOT_INT_STATUS 0xFC 188 189 #define SDHCI_HOST_VERSION 0xFE 190 #define SDHCI_VENDOR_VER_MASK 0xFF00 191 #define SDHCI_VENDOR_VER_SHIFT 8 192 #define SDHCI_SPEC_VER_MASK 0x00FF 193 #define SDHCI_SPEC_VER_SHIFT 0 194 #define SDHCI_SPEC_100 0 195 #define SDHCI_SPEC_200 1 196 #define SDHCI_SPEC_300 2 197 198 #define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK) 199 200 /* 201 * End of controller registers. 202 */ 203 204 #define SDHCI_MAX_DIV_SPEC_200 256 205 #define SDHCI_MAX_DIV_SPEC_300 2046 206 207 /* 208 * quirks 209 */ 210 #define SDHCI_QUIRK_32BIT_DMA_ADDR (1 << 0) 211 #define SDHCI_QUIRK_REG32_RW (1 << 1) 212 #define SDHCI_QUIRK_BROKEN_R1B (1 << 2) 213 #define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3) 214 #define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4) 215 /* 216 * SDHCI_QUIRK_BROKEN_HISPD_MODE 217 * the hardware cannot operate correctly in high-speed mode, 218 * this quirk forces the sdhci host-controller to non high-speed mode 219 */ 220 #define SDHCI_QUIRK_BROKEN_HISPD_MODE BIT(5) 221 #define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6) 222 #define SDHCI_QUIRK_USE_WIDE8 (1 << 8) 223 224 /* to make gcc happy */ 225 struct sdhci_host; 226 227 /* 228 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. 229 */ 230 #define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) 231 #define SDHCI_DEFAULT_BOUNDARY_ARG (7) 232 struct sdhci_ops { 233 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS 234 u32 (*read_l)(struct sdhci_host *host, int reg); 235 u16 (*read_w)(struct sdhci_host *host, int reg); 236 u8 (*read_b)(struct sdhci_host *host, int reg); 237 void (*write_l)(struct sdhci_host *host, u32 val, int reg); 238 void (*write_w)(struct sdhci_host *host, u16 val, int reg); 239 void (*write_b)(struct sdhci_host *host, u8 val, int reg); 240 #endif 241 int (*get_cd)(struct sdhci_host *host); 242 void (*set_control_reg)(struct sdhci_host *host); 243 void (*set_ios_post)(struct sdhci_host *host); 244 void (*set_clock)(struct sdhci_host *host, u32 div); 245 }; 246 247 struct sdhci_host { 248 const char *name; 249 void *ioaddr; 250 unsigned int quirks; 251 unsigned int host_caps; 252 unsigned int version; 253 unsigned int max_clk; /* Maximum Base Clock frequency */ 254 unsigned int clk_mul; /* Clock Multiplier value */ 255 unsigned int clock; 256 struct mmc *mmc; 257 const struct sdhci_ops *ops; 258 int index; 259 260 int bus_width; 261 struct gpio_desc pwr_gpio; /* Power GPIO */ 262 struct gpio_desc cd_gpio; /* Card Detect GPIO */ 263 264 uint voltages; 265 266 struct mmc_config cfg; 267 }; 268 269 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS 270 271 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) 272 { 273 if (unlikely(host->ops->write_l)) 274 host->ops->write_l(host, val, reg); 275 else 276 writel(val, host->ioaddr + reg); 277 } 278 279 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) 280 { 281 if (unlikely(host->ops->write_w)) 282 host->ops->write_w(host, val, reg); 283 else 284 writew(val, host->ioaddr + reg); 285 } 286 287 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) 288 { 289 if (unlikely(host->ops->write_b)) 290 host->ops->write_b(host, val, reg); 291 else 292 writeb(val, host->ioaddr + reg); 293 } 294 295 static inline u32 sdhci_readl(struct sdhci_host *host, int reg) 296 { 297 if (unlikely(host->ops->read_l)) 298 return host->ops->read_l(host, reg); 299 else 300 return readl(host->ioaddr + reg); 301 } 302 303 static inline u16 sdhci_readw(struct sdhci_host *host, int reg) 304 { 305 if (unlikely(host->ops->read_w)) 306 return host->ops->read_w(host, reg); 307 else 308 return readw(host->ioaddr + reg); 309 } 310 311 static inline u8 sdhci_readb(struct sdhci_host *host, int reg) 312 { 313 if (unlikely(host->ops->read_b)) 314 return host->ops->read_b(host, reg); 315 else 316 return readb(host->ioaddr + reg); 317 } 318 319 #else 320 321 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) 322 { 323 writel(val, host->ioaddr + reg); 324 } 325 326 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) 327 { 328 writew(val, host->ioaddr + reg); 329 } 330 331 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) 332 { 333 writeb(val, host->ioaddr + reg); 334 } 335 static inline u32 sdhci_readl(struct sdhci_host *host, int reg) 336 { 337 return readl(host->ioaddr + reg); 338 } 339 340 static inline u16 sdhci_readw(struct sdhci_host *host, int reg) 341 { 342 return readw(host->ioaddr + reg); 343 } 344 345 static inline u8 sdhci_readb(struct sdhci_host *host, int reg) 346 { 347 return readb(host->ioaddr + reg); 348 } 349 #endif 350 351 #ifdef CONFIG_BLK 352 /** 353 * sdhci_setup_cfg() - Set up the configuration for DWMMC 354 * 355 * This is used to set up an SDHCI device when you are using CONFIG_BLK. 356 * 357 * This should be called from your MMC driver's probe() method once you have 358 * the information required. 359 * 360 * Generally your driver will have a platform data structure which holds both 361 * the configuration (struct mmc_config) and the MMC device info (struct mmc). 362 * For example: 363 * 364 * struct msm_sdhc_plat { 365 * struct mmc_config cfg; 366 * struct mmc mmc; 367 * }; 368 * 369 * ... 370 * 371 * Inside U_BOOT_DRIVER(): 372 * .platdata_auto_alloc_size = sizeof(struct msm_sdhc_plat), 373 * 374 * To access platform data: 375 * struct msm_sdhc_plat *plat = dev_get_platdata(dev); 376 * 377 * See msm_sdhci.c for an example. 378 * 379 * @cfg: Configuration structure to fill in (generally &plat->mmc) 380 * @host: SDHCI host structure 381 * @f_max: Maximum supported clock frequency in HZ (0 for default) 382 * @f_min: Minimum supported clock frequency in HZ (0 for default) 383 */ 384 int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, 385 u32 f_max, u32 f_min); 386 387 /** 388 * sdhci_bind() - Set up a new MMC block device 389 * 390 * This is used to set up an SDHCI block device when you are using CONFIG_BLK. 391 * It should be called from your driver's bind() method. 392 * 393 * See msm_sdhci.c for an example. 394 * 395 * @dev: Device to set up 396 * @mmc: Pointer to mmc structure (normally &plat->mmc) 397 * @cfg: Empty configuration structure (generally &plat->cfg). This is 398 * normally all zeroes at this point. The only purpose of passing 399 * this in is to set mmc->cfg to it. 400 * @return 0 if OK, -ve if the block device could not be created 401 */ 402 int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); 403 #else 404 405 /** 406 * add_sdhci() - Add a new SDHCI interface 407 * 408 * This is used when you are not using CONFIG_BLK. Convert your driver over! 409 * 410 * @host: SDHCI host structure 411 * @f_max: Maximum supported clock frequency in HZ (0 for default) 412 * @f_min: Minimum supported clock frequency in HZ (0 for default) 413 * @return 0 if OK, -ve on error 414 */ 415 int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min); 416 #endif /* !CONFIG_BLK */ 417 418 #ifdef CONFIG_DM_MMC 419 /* Export the operations to drivers */ 420 int sdhci_probe(struct udevice *dev); 421 extern const struct dm_mmc_ops sdhci_ops; 422 #else 423 #endif 424 425 #endif /* __SDHCI_HW_H */ 426