SPDX: Convert all of our single license tags to Linux Kernel styleWhen U-Boot started using SPDX tags we were among the early adopters andthere weren't a lot of other examples to borrow from. So
SPDX: Convert all of our single license tags to Linux Kernel styleWhen U-Boot started using SPDX tags we were among the early adopters andthere weren't a lot of other examples to borrow from. So we picked thearea of the file that usually had a full license text and replaced itwith an appropriate SPDX-License-Identifier: entry. Since then, theLinux Kernel has adopted SPDX tags and they place it as the very firstline in a file (except where shebangs are used, then it's second line)and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibilityand in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declaredlicense in the tag as both the before and after are identical in tagcontents. There's also a few places where I found we did not have a tagand have introduced one.Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
Drop CONFIG_HAS_DATAFLASHLast user of this option went away in commit:fdc7718999 ("board: usb_a9263: Update to support DT and DM")Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
board: at91sam9261ek: Update to support DT and DMAdd the dts files to support deivce tree, update the configurationfiles to support the device tree and driver model. The peripheralclock and pins
board: at91sam9261ek: Update to support DT and DMAdd the dts files to support deivce tree, update the configurationfiles to support the device tree and driver model. The peripheralclock and pins configuration are handled by the clock and the pinctrldrivers respectively.Enable the early debug UART to debug problems when an ICE or otherdebug mechanism is not available.Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>Reviewed-by: Simon Glass <sjg@chromium.org>
board: atmel: use get_nand_dev_by_index()As part of preparation for nand DM conversion the new API has beenintroduced to remove direct access to nand_info array. So, use it hereinstead of accessi
board: atmel: use get_nand_dev_by_index()As part of preparation for nand DM conversion the new API has beenintroduced to remove direct access to nand_info array. So, use it hereinstead of accessing to nand_info array directly.Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
arm: Add explicit include of <asm/mach-types.h>Rather than relying on common.h to provide this include, which is goingaway at some point, include it explicitly in each file.Signed-off-by: Simon
arm: Add explicit include of <asm/mach-types.h>Rather than relying on common.h to provide this include, which is goingaway at some point, include it explicitly in each file.Signed-off-by: Simon Glass <sjg@chromium.org>Reviewed-by: Tom Rini <trini@konsulko.com>
nand: Embed mtd_info in struct nand_chipnand_info[] is now an array of pointers, with the actual mtd_infoinstance embedded in struct nand_chip.This is in preparation for syncing the NAND code wi
nand: Embed mtd_info in struct nand_chipnand_info[] is now an array of pointers, with the actual mtd_infoinstance embedded in struct nand_chip.This is in preparation for syncing the NAND code with Linux 4.6,which makes the same change to struct nand_chip. It's in a separatecommit due to the large amount of changes required to accommodate thechange to nand_info[].Signed-off-by: Scott Wood <oss@buserror.net>
board: atmel: clean up peripheral clock codeDue to introducing the new peripheral clock handle functions,use these functions to reduce duplicated code.Signed-off-by: Wenyou Yang <wenyou.yang@atm
board: atmel: clean up peripheral clock codeDue to introducing the new peripheral clock handle functions,use these functions to reduce duplicated code.Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>Tested-by: Heiko Schocher <hs@denx.de>[Rebased on current master, fixup for at91rm9200ek]Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
net: Remove the bd* parameter from net stack functionsThis value is not used by the network stack and is available in theglobal data, so stop passing it around. For the one legacy functionthat s
net: Remove the bd* parameter from net stack functionsThis value is not used by the network stack and is available in theglobal data, so stop passing it around. For the one legacy functionthat still expects it (init op on old Ethernet drivers) pass in theglobal pointer version directly to avoid changing that interface.Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>Reported-by: Simon Glass <sjg@chromium.org>Reviewed-by: Simon Glass <sjg@chromium.org>Signed-off-by: Simon Glass <sjg@chromium.org>(Trival fix to remove an unneeded variable declaration in 4xx_enet.c)
ARM: at91: move board select menu and common settingsThe board select menu in arch/arm/Kconfig is still big.To slim down it, this commit moves AT91 boards toarch/arm/mach-at91/Kconfig.Also, cons
ARM: at91: move board select menu and common settingsThe board select menu in arch/arm/Kconfig is still big.To slim down it, this commit moves AT91 boards toarch/arm/mach-at91/Kconfig.Also, consolidate "config SYS_SOC" in each board Kconfig.The Kconfig files under board/ directory were modified with thefollowing command: find board -name Kconfig | xargs sed -i -e ' /config SYS_SOC/ { N /default "at91"/ { N d } } 'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Acked-by: Andreas Bießmann <andreas.devel@googlemail.co>
kconfig: arm: introduce symbol for ARM CPUsThis commit introduces a Kconfig symbol for each ARM CPU:CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,CPU_ARM1176, CPU_V7, CPU_PXA
kconfig: arm: introduce symbol for ARM CPUsThis commit introduces a Kconfig symbol for each ARM CPU:CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selectedfor CPU_ARM1176 and CPU_V7.For each target, the corresponding CPU is selected and the definition ofSYS_CPU in the corresponding Kconfig file is removed.Also, it removes redundant "string" type in some Kconfig files.Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in arch and board Kconfig files.This commit can be easily reproduced by the following command:find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string//}'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS for
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS format as in Linux Kernel would be nicebecause we can crib the scripts/get_maintainer.pl script.After some discussion, we chose to put a MAINTAINERS file under eachboard directory, not the top-level one because we want to collectrelevant information for a board into a single place.TODO:Modify get_maintainer.pl to scan multiple MAINTAINERS files.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Suggested-by: Tom Rini <trini@ti.com>Acked-by: Simon Glass <sjg@chromium.org>
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board(This commit was automatically generated by a conversion scriptbased on boards.cfg)In Linux Kernel, defconfig files are located underarch/${ARCH}/configs/ directory.It works in Linux Kernel since ARCH is always given from thecommand line for cross compile.But in U-Boot, ARCH is not given from the command line.Which means we cannot know ARCH until the board configuration is done.That is why all the "*_defconfig" files should be gathered into asingle directory ./configs/.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Acked-by: Simon Glass <sjg@chromium.org>
cosmetic: atmel: replace old style struct initThis prevents some warnings when building with clang.cc:: andreas.devel@googlemail.comSigned-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
board: arm: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Andreas Bießmann <andreas.devel@googlemail
board: arm: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Andreas Bießmann <andreas.devel@googlemail.com>Cc: Stefano Babic <sbabic@denx.de>Cc: Prafulla Wadaskar <prafulla@marvell.com>Cc: Minkyu Kang <mk7.kang@samsung.com>Cc: Vipin Kumar <vipin.kumar@st.com>Cc: Tom Warren <twarren@nvidia.com>Cc: Tom Rini <trini@ti.com>
Add GPL-2.0+ SPDX-License-Identifier to source filesSigned-off-by: Wolfgang Denk <wd@denx.de>[trini: Fixup common/cmd_io.c]Signed-off-by: Tom Rini <trini@ti.com>
arm:at91-boards: remove console_init_f where unnecessaryA lot of at91 boards have the console_init_f in board_init. This is uselesscause it was called before by generic code in lib/board.c.Signe
arm:at91-boards: remove console_init_f where unnecessaryA lot of at91 boards have the console_init_f in board_init. This is uselesscause it was called before by generic code in lib/board.c.Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>cc: Jens Scharsig <esw@bus-elektronik.de>cc: Stelian Pop <stelian@popies.net>cc: Sedji Gaouaou<sedji.gaouaou@atmel.com>cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>cc: Eric Benard <eric@eukrea.com>Tested-by: voice.shen@atmel.comTested-by: voice.shen@atmel.comAcked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
AT91SAM9*: Change kernel address in dataflash to match u-boot's sizeOn at91sam platforms, u-boot grew larger than the allocated size indataflash, the layout was:bootstrap 0x00000000ubootenv 0
AT91SAM9*: Change kernel address in dataflash to match u-boot's sizeOn at91sam platforms, u-boot grew larger than the allocated size indataflash, the layout was:bootstrap 0x00000000ubootenv 0x00004200uboot 0x00008400kernel 0x00042000fs 0x00252000u-boot with the defconfig doesn't seem to fit in 0x42000 - 0x8400 =0x39C00 bytes anymore.Now, the layout is:bootstrap 0x00000000ubootenv 0x00004200uboot 0x00008400kernel 0x00084000fs 0x00294000Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Fix Stelian's email addressChange my old email address which is no longer valid.Signed-off-by: Stelian Pop <stelian@popies.net>Signed-off-by: Anatolij Gustschin <agust@denx.de>
punt unused clean/distclean targetsThe top level Makefile does not do any recursion into subdirs whencleaning, so these clean/distclean targets in random arch/board dirsnever get used. Punt them
punt unused clean/distclean targetsThe top level Makefile does not do any recursion into subdirs whencleaning, so these clean/distclean targets in random arch/board dirsnever get used. Punt them all.MAKEALL didn't report any errors related to this that I could see.Signed-off-by: Mike Frysinger <vapier@gentoo.org>
AT91: Board fix for AT91SAM9261-EKFix board part of AT91SAM9261-EK according to the new schemeSigned-off-by: Hong Xu <hong.xu@atmel.com>Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Switch from archive libraries to partial linkingBefore this commit, weak symbols were not overridden by non-weak symbolsfound in archive libraries when linking with recent versions ofbinutils. A
Switch from archive libraries to partial linkingBefore this commit, weak symbols were not overridden by non-weak symbolsfound in archive libraries when linking with recent versions ofbinutils. As stated in the System V ABI, "the link editor does notextract archive members to resolve undefined weak symbols".This commit changes all Makefiles to use partial linking (ld -r) insteadof creating library archives, which forces all symbols to participate inlinking, allowing non-weak symbols to override weak symbols as intended.This approach is also used by Linux, from which the gmake functioncmd_link_o_target (defined in config.mk and used in all Makefiles) isinspired.The name of each former library archive is preserved except forextensions which change from ".a" to ".o". This commit updatesreferences accordingly where needed, in particular in some linkerscripts.This commit reveals board configurations that exclude some features butinclude source files that depend these disabled features in the build,resulting in undefined symbols. Known such cases include:- disabling CMD_NET but not CMD_NFS;- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASEThe change is currently needed to be able to remove the boardconfiguration scripting from the top level Makefile and replace it bya simple, table driven
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASEThe change is currently needed to be able to remove the boardconfiguration scripting from the top level Makefile and replace it bya simple, table driven script.Moving this configuration setting into the "CONFIG_*" name space isalso desirable because it is needed if we ever should move forward toa Kconfig driven configuration system.Signed-off-by: Wolfgang Denk <wd@denx.de>
ARM change name of defines for AT91 arm926ejsConfiguration defines should be preceeded with CONFIG_SYS_. Renamedsome at91 specific defines to conform to this naming convention:AT91_CPU_NAME to C
ARM change name of defines for AT91 arm926ejsConfiguration defines should be preceeded with CONFIG_SYS_. Renamedsome at91 specific defines to conform to this naming convention:AT91_CPU_NAME to CONFIG_SYS_AT91_CPU_NAMEAT91_MAIN_CLOCK to CONFIG_SYS_AT91_MAIN_CLOCKSigned-off-by: Achim Ehrlich <aehrlich@taskit.de>
at91sam9261ek.c: fix minor coding style issue.Signed-off-by: Wolfgang Denk <wd@denx.de>
12