1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * P010 RDB board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #ifdef CONFIG_36BIT 15 #define CONFIG_PHYS_64BIT 16 #endif 17 18 #define CONFIG_P1010 19 #define CONFIG_E500 /* BOOKE e500 family */ 20 #include <asm/config_mpc85xx.h> 21 #define CONFIG_NAND_FSL_IFC 22 23 #ifdef CONFIG_SDCARD 24 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 25 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 26 #define CONFIG_SPL_ENV_SUPPORT 27 #define CONFIG_SPL_SERIAL_SUPPORT 28 #define CONFIG_SPL_MMC_SUPPORT 29 #define CONFIG_SPL_MMC_MINIMAL 30 #define CONFIG_SPL_FLUSH_IMAGE 31 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 32 #define CONFIG_SPL_LIBGENERIC_SUPPORT 33 #define CONFIG_SPL_LIBCOMMON_SUPPORT 34 #define CONFIG_SPL_I2C_SUPPORT 35 #define CONFIG_FSL_LAW /* Use common FSL init code */ 36 #define CONFIG_SYS_TEXT_BASE 0x11001000 37 #define CONFIG_SPL_TEXT_BASE 0xD0001000 38 #define CONFIG_SPL_PAD_TO 0x18000 39 #define CONFIG_SPL_MAX_SIZE (96 * 1024) 40 #define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) 41 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 42 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 43 #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) 44 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 45 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 46 #define CONFIG_SPL_MMC_BOOT 47 #ifdef CONFIG_SPL_BUILD 48 #define CONFIG_SPL_COMMON_INIT_DDR 49 #endif 50 #endif 51 52 #ifdef CONFIG_SPIFLASH 53 #ifdef CONFIG_SECURE_BOOT 54 #define CONFIG_RAMBOOT_SPIFLASH 55 #define CONFIG_SYS_TEXT_BASE 0x11000000 56 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 57 #else 58 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 59 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 60 #define CONFIG_SPL_ENV_SUPPORT 61 #define CONFIG_SPL_SERIAL_SUPPORT 62 #define CONFIG_SPL_SPI_SUPPORT 63 #define CONFIG_SPL_SPI_FLASH_SUPPORT 64 #define CONFIG_SPL_SPI_FLASH_MINIMAL 65 #define CONFIG_SPL_FLUSH_IMAGE 66 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 67 #define CONFIG_SPL_LIBGENERIC_SUPPORT 68 #define CONFIG_SPL_LIBCOMMON_SUPPORT 69 #define CONFIG_SPL_I2C_SUPPORT 70 #define CONFIG_FSL_LAW /* Use common FSL init code */ 71 #define CONFIG_SYS_TEXT_BASE 0x11001000 72 #define CONFIG_SPL_TEXT_BASE 0xD0001000 73 #define CONFIG_SPL_PAD_TO 0x18000 74 #define CONFIG_SPL_MAX_SIZE (96 * 1024) 75 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) 76 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) 79 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 80 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 81 #define CONFIG_SPL_SPI_BOOT 82 #ifdef CONFIG_SPL_BUILD 83 #define CONFIG_SPL_COMMON_INIT_DDR 84 #endif 85 #endif 86 #endif 87 88 #ifdef CONFIG_NAND 89 #ifdef CONFIG_SECURE_BOOT 90 #define CONFIG_SPL_INIT_MINIMAL 91 #define CONFIG_SPL_SERIAL_SUPPORT 92 #define CONFIG_SPL_NAND_SUPPORT 93 #define CONFIG_SPL_NAND_BOOT 94 #define CONFIG_SPL_FLUSH_IMAGE 95 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 96 97 #define CONFIG_SYS_TEXT_BASE 0x00201000 98 #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 99 #define CONFIG_SPL_MAX_SIZE 8192 100 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 101 #define CONFIG_SPL_RELOC_STACK 0x00100000 102 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) 103 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) 104 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 105 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 106 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 107 #else 108 #ifdef CONFIG_TPL_BUILD 109 #define CONFIG_SPL_NAND_BOOT 110 #define CONFIG_SPL_FLUSH_IMAGE 111 #define CONFIG_SPL_ENV_SUPPORT 112 #define CONFIG_SPL_NAND_INIT 113 #define CONFIG_SPL_SERIAL_SUPPORT 114 #define CONFIG_SPL_LIBGENERIC_SUPPORT 115 #define CONFIG_SPL_LIBCOMMON_SUPPORT 116 #define CONFIG_SPL_I2C_SUPPORT 117 #define CONFIG_SPL_NAND_SUPPORT 118 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 119 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 120 #define CONFIG_SPL_COMMON_INIT_DDR 121 #define CONFIG_SPL_MAX_SIZE (128 << 10) 122 #define CONFIG_SPL_TEXT_BASE 0xD0001000 123 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 124 #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) 125 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 126 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 127 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 128 #elif defined(CONFIG_SPL_BUILD) 129 #define CONFIG_SPL_INIT_MINIMAL 130 #define CONFIG_SPL_SERIAL_SUPPORT 131 #define CONFIG_SPL_NAND_SUPPORT 132 #define CONFIG_SPL_NAND_MINIMAL 133 #define CONFIG_SPL_FLUSH_IMAGE 134 #define CONFIG_SPL_TEXT_BASE 0xff800000 135 #define CONFIG_SPL_MAX_SIZE 8192 136 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 137 #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000 138 #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000 139 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 140 #endif 141 #define CONFIG_SPL_PAD_TO 0x20000 142 #define CONFIG_TPL_PAD_TO 0x20000 143 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 144 #define CONFIG_SYS_TEXT_BASE 0x11001000 145 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 146 #endif 147 #endif 148 149 #ifdef CONFIG_NAND_SECBOOT /* NAND Boot */ 150 #define CONFIG_RAMBOOT_NAND 151 #define CONFIG_SYS_TEXT_BASE 0x11000000 152 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 153 #endif 154 155 #ifndef CONFIG_SYS_TEXT_BASE 156 #define CONFIG_SYS_TEXT_BASE 0xeff40000 157 #endif 158 159 #ifndef CONFIG_RESET_VECTOR_ADDRESS 160 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 161 #endif 162 163 #ifdef CONFIG_SPL_BUILD 164 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 165 #else 166 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 167 #endif 168 169 /* High Level Configuration Options */ 170 #define CONFIG_BOOKE /* BOOKE */ 171 #define CONFIG_E500 /* BOOKE e500 family */ 172 #define CONFIG_FSL_IFC /* Enable IFC Support */ 173 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 174 175 #define CONFIG_PCI /* Enable PCI/PCIE */ 176 #if defined(CONFIG_PCI) 177 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 178 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ 179 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 180 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 181 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 182 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 183 184 #define CONFIG_CMD_NET 185 #define CONFIG_CMD_PCI 186 187 #define CONFIG_E1000 /* E1000 pci Ethernet card*/ 188 189 /* 190 * PCI Windows 191 * Memory space is mapped 1-1, but I/O space must start from 0. 192 */ 193 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 194 #define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot" 195 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 196 #ifdef CONFIG_PHYS_64BIT 197 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 198 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 199 #else 200 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 201 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 202 #endif 203 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 204 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 205 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 206 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 207 #ifdef CONFIG_PHYS_64BIT 208 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 209 #else 210 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 211 #endif 212 213 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 214 #if defined(CONFIG_P1010RDB_PA) 215 #define CONFIG_SYS_PCIE2_NAME "PCIe Slot" 216 #elif defined(CONFIG_P1010RDB_PB) 217 #define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot" 218 #endif 219 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 220 #ifdef CONFIG_PHYS_64BIT 221 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 222 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 223 #else 224 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 225 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 226 #endif 227 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 228 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 229 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 230 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 231 #ifdef CONFIG_PHYS_64BIT 232 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 233 #else 234 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 235 #endif 236 237 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 238 239 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 240 #define CONFIG_DOS_PARTITION 241 #endif 242 243 #define CONFIG_FSL_LAW /* Use common FSL init code */ 244 #define CONFIG_TSEC_ENET 245 #define CONFIG_ENV_OVERWRITE 246 247 #define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */ 248 #define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ 249 250 #define CONFIG_MISC_INIT_R 251 #define CONFIG_HWCONFIG 252 /* 253 * These can be toggled for performance analysis, otherwise use default. 254 */ 255 #define CONFIG_L2_CACHE /* toggle L2 cache */ 256 #define CONFIG_BTB /* toggle branch predition */ 257 258 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 259 260 #define CONFIG_ENABLE_36BIT_PHYS 261 262 #ifdef CONFIG_PHYS_64BIT 263 #define CONFIG_ADDR_MAP 1 264 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 265 #endif 266 267 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 268 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 269 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 270 271 /* DDR Setup */ 272 #define CONFIG_SYS_FSL_DDR3 273 #define CONFIG_SYS_DDR_RAW_TIMING 274 #define CONFIG_DDR_SPD 275 #define CONFIG_SYS_SPD_BUS_NUM 1 276 #define SPD_EEPROM_ADDRESS 0x52 277 278 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 279 280 #ifndef __ASSEMBLY__ 281 extern unsigned long get_sdram_size(void); 282 #endif 283 #define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */ 284 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 285 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 286 287 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 288 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 289 290 /* DDR3 Controller Settings */ 291 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 292 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 293 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 294 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 295 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 296 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 297 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 298 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 299 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 300 #define CONFIG_SYS_DDR_RCW_1 0x00000000 301 #define CONFIG_SYS_DDR_RCW_2 0x00000000 302 #define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */ 303 #define CONFIG_SYS_DDR_CONTROL_2 0x24401000 304 #define CONFIG_SYS_DDR_TIMING_4 0x00000001 305 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 306 307 #define CONFIG_SYS_DDR_TIMING_3_800 0x00030000 308 #define CONFIG_SYS_DDR_TIMING_0_800 0x00110104 309 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644 310 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF 311 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 312 #define CONFIG_SYS_DDR_MODE_1_800 0x00441420 313 #define CONFIG_SYS_DDR_MODE_2_800 0x00000000 314 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100 315 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608 316 317 /* settings for DDR3 at 667MT/s */ 318 #define CONFIG_SYS_DDR_TIMING_3_667 0x00010000 319 #define CONFIG_SYS_DDR_TIMING_0_667 0x00110004 320 #define CONFIG_SYS_DDR_TIMING_1_667 0x5d59e544 321 #define CONFIG_SYS_DDR_TIMING_2_667 0x0FA890CD 322 #define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000 323 #define CONFIG_SYS_DDR_MODE_1_667 0x00441210 324 #define CONFIG_SYS_DDR_MODE_2_667 0x00000000 325 #define CONFIG_SYS_DDR_INTERVAL_667 0x0a280000 326 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667 0x8675F608 327 328 #define CONFIG_SYS_CCSRBAR 0xffe00000 329 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 330 331 /* Don't relocate CCSRBAR while in NAND_SPL */ 332 #ifdef CONFIG_SPL_BUILD 333 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 334 #endif 335 336 /* 337 * Memory map 338 * 339 * 0x0000_0000 0x3fff_ffff DDR 1G cacheable 340 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable 341 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 342 * 343 * Localbus non-cacheable 344 * 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable 345 * 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable 346 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 347 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 348 */ 349 350 /* 351 * IFC Definitions 352 */ 353 /* NOR Flash on IFC */ 354 #ifdef CONFIG_SPL_BUILD 355 #define CONFIG_SYS_NO_FLASH 356 #endif 357 358 #define CONFIG_SYS_FLASH_BASE 0xee000000 359 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 360 361 #ifdef CONFIG_PHYS_64BIT 362 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 363 #else 364 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 365 #endif 366 367 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 368 CSPR_PORT_SIZE_16 | \ 369 CSPR_MSEL_NOR | \ 370 CSPR_V) 371 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(32*1024*1024) 372 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7) 373 /* NOR Flash Timing Params */ 374 #define CONFIG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) | \ 375 FTIM0_NOR_TEADC(0x5) | \ 376 FTIM0_NOR_TEAHC(0x5) 377 #define CONFIG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) | \ 378 FTIM1_NOR_TRAD_NOR(0x0f) 379 #define CONFIG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) | \ 380 FTIM2_NOR_TCH(0x4) | \ 381 FTIM2_NOR_TWP(0x1c) 382 #define CONFIG_SYS_NOR_FTIM3 0x0 383 384 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 385 #define CONFIG_SYS_FLASH_QUIET_TEST 386 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 387 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 388 389 #undef CONFIG_SYS_FLASH_CHECKSUM 390 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 391 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 392 393 /* CFI for NOR Flash */ 394 #define CONFIG_FLASH_CFI_DRIVER 395 #define CONFIG_SYS_FLASH_CFI 396 #define CONFIG_SYS_FLASH_EMPTY_INFO 397 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 398 399 /* NAND Flash on IFC */ 400 #define CONFIG_SYS_NAND_BASE 0xff800000 401 #ifdef CONFIG_PHYS_64BIT 402 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 403 #else 404 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 405 #endif 406 407 #define CONFIG_MTD_DEVICE 408 #define CONFIG_MTD_PARTITION 409 #define CONFIG_CMD_MTDPARTS 410 #define MTDIDS_DEFAULT "nand0=ff800000.flash" 411 #define MTDPARTS_DEFAULT \ 412 "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)" 413 414 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 415 | CSPR_PORT_SIZE_8 \ 416 | CSPR_MSEL_NAND \ 417 | CSPR_V) 418 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 419 420 #if defined(CONFIG_P1010RDB_PA) 421 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 422 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 423 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 424 | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \ 425 | CSOR_NAND_PGS_512 /* Page Size = 512b */ \ 426 | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \ 427 | CSOR_NAND_PB(32)) /* 32 Pages Per Block */ 428 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 429 430 #elif defined(CONFIG_P1010RDB_PB) 431 #define CONFIG_SYS_NAND_ONFI_DETECTION 432 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 433 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 434 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 435 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 436 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 437 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 438 | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */ 439 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 440 #endif 441 442 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 443 #define CONFIG_SYS_MAX_NAND_DEVICE 1 444 #define CONFIG_MTD_NAND_VERIFY_WRITE 445 #define CONFIG_CMD_NAND 446 447 #if defined(CONFIG_P1010RDB_PA) 448 /* NAND Flash Timing Params */ 449 #define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \ 450 FTIM0_NAND_TWP(0x0C) | \ 451 FTIM0_NAND_TWCHT(0x04) | \ 452 FTIM0_NAND_TWH(0x05) 453 #define CONFIG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) | \ 454 FTIM1_NAND_TWBE(0x1d) | \ 455 FTIM1_NAND_TRR(0x07) | \ 456 FTIM1_NAND_TRP(0x0c) 457 #define CONFIG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) | \ 458 FTIM2_NAND_TREH(0x05) | \ 459 FTIM2_NAND_TWHRE(0x0f) 460 #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) 461 462 #elif defined(CONFIG_P1010RDB_PB) 463 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */ 464 /* ONFI NAND Flash mode0 Timing Params */ 465 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \ 466 FTIM0_NAND_TWP(0x18) | \ 467 FTIM0_NAND_TWCHT(0x07) | \ 468 FTIM0_NAND_TWH(0x0a)) 469 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \ 470 FTIM1_NAND_TWBE(0x39) | \ 471 FTIM1_NAND_TRR(0x0e) | \ 472 FTIM1_NAND_TRP(0x18)) 473 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 474 FTIM2_NAND_TREH(0x0a) | \ 475 FTIM2_NAND_TWHRE(0x1e)) 476 #define CONFIG_SYS_NAND_FTIM3 0x0 477 #endif 478 479 #define CONFIG_SYS_NAND_DDR_LAW 11 480 481 /* Set up IFC registers for boot location NOR/NAND */ 482 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) 483 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 484 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 485 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 486 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 487 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 488 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 489 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 490 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 491 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 492 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 493 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 494 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 495 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 496 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 497 #else 498 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 499 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 500 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 501 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 502 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 503 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 504 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 505 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 506 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 507 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 508 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 509 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 510 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 511 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 512 #endif 513 514 /* CPLD on IFC */ 515 #define CONFIG_SYS_CPLD_BASE 0xffb00000 516 517 #ifdef CONFIG_PHYS_64BIT 518 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull 519 #else 520 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 521 #endif 522 523 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 524 | CSPR_PORT_SIZE_8 \ 525 | CSPR_MSEL_GPCM \ 526 | CSPR_V) 527 #define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) 528 #define CONFIG_SYS_CSOR3 0x0 529 /* CPLD Timing parameters for IFC CS3 */ 530 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 531 FTIM0_GPCM_TEADC(0x0e) | \ 532 FTIM0_GPCM_TEAHC(0x0e)) 533 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 534 FTIM1_GPCM_TRAD(0x1f)) 535 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 536 FTIM2_GPCM_TCH(0x8) | \ 537 FTIM2_GPCM_TWP(0x1f)) 538 #define CONFIG_SYS_CS3_FTIM3 0x0 539 540 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \ 541 defined(CONFIG_RAMBOOT_NAND) 542 #define CONFIG_SYS_RAMBOOT 543 #define CONFIG_SYS_EXTRA_ENV_RELOC 544 #else 545 #undef CONFIG_SYS_RAMBOOT 546 #endif 547 548 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 549 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) 550 #define CONFIG_A003399_NOR_WORKAROUND 551 #endif 552 #endif 553 554 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 555 #define CONFIG_BOARD_EARLY_INIT_R 556 557 #define CONFIG_SYS_INIT_RAM_LOCK 558 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 559 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ 560 561 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ 562 - GENERATED_GBL_DATA_SIZE) 563 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 564 565 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 566 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ 567 568 /* 569 * Config the L2 Cache as L2 SRAM 570 */ 571 #if defined(CONFIG_SPL_BUILD) 572 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 573 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 574 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 575 #define CONFIG_SYS_L2_SIZE (256 << 10) 576 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 577 #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 578 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 579 #define CONFIG_SPL_RELOC_STACK_SIZE (16 << 10) 580 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) 581 #define CONFIG_SPL_RELOC_MALLOC_SIZE (128 << 10) 582 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024) 583 #elif defined(CONFIG_NAND) 584 #ifdef CONFIG_TPL_BUILD 585 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 586 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 587 #define CONFIG_SYS_L2_SIZE (256 << 10) 588 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 589 #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 590 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 591 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 592 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 593 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 594 #else 595 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 596 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 597 #define CONFIG_SYS_L2_SIZE (256 << 10) 598 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 599 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) 600 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 601 #endif 602 #endif 603 #endif 604 605 /* Serial Port */ 606 #define CONFIG_CONS_INDEX 1 607 #undef CONFIG_SERIAL_SOFTWARE_FIFO 608 #define CONFIG_SYS_NS16550 609 #define CONFIG_SYS_NS16550_SERIAL 610 #define CONFIG_SYS_NS16550_REG_SIZE 1 611 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 612 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 613 #define CONFIG_NS16550_MIN_FUNCTIONS 614 #endif 615 616 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 617 618 #define CONFIG_SYS_BAUDRATE_TABLE \ 619 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 620 621 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 622 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 623 624 /* Use the HUSH parser */ 625 #define CONFIG_SYS_HUSH_PARSER 626 627 /* 628 * Pass open firmware flat tree 629 */ 630 #define CONFIG_OF_LIBFDT 631 #define CONFIG_OF_BOARD_SETUP 632 #define CONFIG_OF_STDOUT_VIA_ALIAS 633 634 /* new uImage format support */ 635 #define CONFIG_FIT 636 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 637 638 /* I2C */ 639 #define CONFIG_SYS_I2C 640 #define CONFIG_SYS_I2C_FSL 641 #define CONFIG_SYS_FSL_I2C_SPEED 400000 642 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 643 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 644 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 645 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 646 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 647 #define I2C_PCA9557_ADDR1 0x18 648 #define I2C_PCA9557_ADDR2 0x19 649 #define I2C_PCA9557_BUS_NUM 0 650 651 /* I2C EEPROM */ 652 #if defined(CONFIG_P1010RDB_PB) 653 #define CONFIG_ID_EEPROM 654 #ifdef CONFIG_ID_EEPROM 655 #define CONFIG_SYS_I2C_EEPROM_NXID 656 #endif 657 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 658 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 659 #define CONFIG_SYS_EEPROM_BUS_NUM 0 660 #define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */ 661 #endif 662 /* enable read and write access to EEPROM */ 663 #define CONFIG_CMD_EEPROM 664 #define CONFIG_SYS_I2C_MULTI_EEPROMS 665 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 666 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 667 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 668 669 /* RTC */ 670 #define CONFIG_RTC_PT7C4338 671 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 672 673 #define CONFIG_CMD_I2C 674 675 /* 676 * SPI interface will not be available in case of NAND boot SPI CS0 will be 677 * used for SLIC 678 */ 679 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT) 680 /* eSPI - Enhanced SPI */ 681 #define CONFIG_FSL_ESPI 682 #define CONFIG_SPI_FLASH 683 #define CONFIG_SPI_FLASH_SPANSION 684 #define CONFIG_CMD_SF 685 #define CONFIG_SF_DEFAULT_SPEED 10000000 686 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 687 #endif 688 689 #if defined(CONFIG_TSEC_ENET) 690 #define CONFIG_MII /* MII PHY management */ 691 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 692 #define CONFIG_TSEC1 1 693 #define CONFIG_TSEC1_NAME "eTSEC1" 694 #define CONFIG_TSEC2 1 695 #define CONFIG_TSEC2_NAME "eTSEC2" 696 #define CONFIG_TSEC3 1 697 #define CONFIG_TSEC3_NAME "eTSEC3" 698 699 #define TSEC1_PHY_ADDR 1 700 #define TSEC2_PHY_ADDR 0 701 #define TSEC3_PHY_ADDR 2 702 703 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 704 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 705 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 706 707 #define TSEC1_PHYIDX 0 708 #define TSEC2_PHYIDX 0 709 #define TSEC3_PHYIDX 0 710 711 #define CONFIG_ETHPRIME "eTSEC1" 712 713 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 714 715 /* TBI PHY configuration for SGMII mode */ 716 #define CONFIG_TSEC_TBICR_SETTINGS ( \ 717 TBICR_PHY_RESET \ 718 | TBICR_ANEG_ENABLE \ 719 | TBICR_FULL_DUPLEX \ 720 | TBICR_SPEED1_SET \ 721 ) 722 723 #endif /* CONFIG_TSEC_ENET */ 724 725 726 /* SATA */ 727 #define CONFIG_FSL_SATA 728 #define CONFIG_FSL_SATA_V2 729 #define CONFIG_LIBATA 730 731 #ifdef CONFIG_FSL_SATA 732 #define CONFIG_SYS_SATA_MAX_DEVICE 2 733 #define CONFIG_SATA1 734 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 735 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 736 #define CONFIG_SATA2 737 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 738 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 739 740 #define CONFIG_CMD_SATA 741 #define CONFIG_LBA48 742 #endif /* #ifdef CONFIG_FSL_SATA */ 743 744 #define CONFIG_MMC 745 #ifdef CONFIG_MMC 746 #define CONFIG_CMD_MMC 747 #define CONFIG_DOS_PARTITION 748 #define CONFIG_FSL_ESDHC 749 #define CONFIG_GENERIC_MMC 750 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 751 #endif 752 753 #define CONFIG_HAS_FSL_DR_USB 754 755 #if defined(CONFIG_HAS_FSL_DR_USB) 756 #define CONFIG_USB_EHCI 757 758 #ifdef CONFIG_USB_EHCI 759 #define CONFIG_CMD_USB 760 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 761 #define CONFIG_USB_EHCI_FSL 762 #define CONFIG_USB_STORAGE 763 #endif 764 #endif 765 766 /* 767 * Environment 768 */ 769 #if defined(CONFIG_SDCARD) 770 #define CONFIG_ENV_IS_IN_MMC 771 #define CONFIG_FSL_FIXED_MMC_LOCATION 772 #define CONFIG_SYS_MMC_ENV_DEV 0 773 #define CONFIG_ENV_SIZE 0x2000 774 #elif defined(CONFIG_SPIFLASH) 775 #define CONFIG_ENV_IS_IN_SPI_FLASH 776 #define CONFIG_ENV_SPI_BUS 0 777 #define CONFIG_ENV_SPI_CS 0 778 #define CONFIG_ENV_SPI_MAX_HZ 10000000 779 #define CONFIG_ENV_SPI_MODE 0 780 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 781 #define CONFIG_ENV_SECT_SIZE 0x10000 782 #define CONFIG_ENV_SIZE 0x2000 783 #elif defined(CONFIG_NAND) 784 #define CONFIG_ENV_IS_IN_NAND 785 #ifdef CONFIG_TPL_BUILD 786 #define CONFIG_ENV_SIZE 0x2000 787 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 788 #else 789 #if defined(CONFIG_P1010RDB_PA) 790 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 791 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */ 792 #elif defined(CONFIG_P1010RDB_PB) 793 #define CONFIG_ENV_SIZE (16 * 1024) 794 #define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */ 795 #endif 796 #endif 797 #define CONFIG_ENV_OFFSET (1024 * 1024) 798 #elif defined(CONFIG_SYS_RAMBOOT) 799 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 800 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 801 #define CONFIG_ENV_SIZE 0x2000 802 #else 803 #define CONFIG_ENV_IS_IN_FLASH 804 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 805 #define CONFIG_ENV_SIZE 0x2000 806 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 807 #endif 808 809 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 810 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 811 812 /* 813 * Command line configuration. 814 */ 815 #include <config_cmd_default.h> 816 817 #define CONFIG_CMD_DATE 818 #define CONFIG_CMD_ERRATA 819 #define CONFIG_CMD_ELF 820 #define CONFIG_CMD_IRQ 821 #define CONFIG_CMD_MII 822 #define CONFIG_CMD_PING 823 #define CONFIG_CMD_SETEXPR 824 #define CONFIG_CMD_REGINFO 825 826 #undef CONFIG_WATCHDOG /* watchdog disabled */ 827 828 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ 829 || defined(CONFIG_FSL_SATA) 830 #define CONFIG_CMD_EXT2 831 #define CONFIG_CMD_FAT 832 #define CONFIG_DOS_PARTITION 833 #endif 834 835 /* 836 * Miscellaneous configurable options 837 */ 838 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 839 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 840 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 841 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 842 843 #if defined(CONFIG_CMD_KGDB) 844 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 845 #else 846 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 847 #endif 848 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 849 /* Print Buffer Size */ 850 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 851 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 852 853 /* 854 * Internal Definitions 855 * 856 * Boot Flags 857 */ 858 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 859 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 860 861 /* 862 * For booting Linux, the board info and command line data 863 * have to be in the first 64 MB of memory, since this is 864 * the maximum mapped by the Linux kernel during initialization. 865 */ 866 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 867 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 868 869 #if defined(CONFIG_CMD_KGDB) 870 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 871 #endif 872 873 /* 874 * Environment Configuration 875 */ 876 877 #if defined(CONFIG_TSEC_ENET) 878 #define CONFIG_HAS_ETH0 879 #define CONFIG_HAS_ETH1 880 #define CONFIG_HAS_ETH2 881 #endif 882 883 #define CONFIG_ROOTPATH "/opt/nfsroot" 884 #define CONFIG_BOOTFILE "uImage" 885 #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ 886 887 /* default location for tftp and bootm */ 888 #define CONFIG_LOADADDR 1000000 889 890 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 891 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 892 893 #define CONFIG_BAUDRATE 115200 894 895 #define CONFIG_EXTRA_ENV_SETTINGS \ 896 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ 897 "netdev=eth0\0" \ 898 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 899 "loadaddr=1000000\0" \ 900 "consoledev=ttyS0\0" \ 901 "ramdiskaddr=2000000\0" \ 902 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 903 "fdtaddr=c00000\0" \ 904 "fdtfile=p1010rdb.dtb\0" \ 905 "bdev=sda1\0" \ 906 "hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \ 907 "othbootargs=ramdisk_size=600000\0" \ 908 "usbfatboot=setenv bootargs root=/dev/ram rw " \ 909 "console=$consoledev,$baudrate $othbootargs; " \ 910 "usb start;" \ 911 "fatload usb 0:2 $loadaddr $bootfile;" \ 912 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 913 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 914 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 915 "usbext2boot=setenv bootargs root=/dev/ram rw " \ 916 "console=$consoledev,$baudrate $othbootargs; " \ 917 "usb start;" \ 918 "ext2load usb 0:4 $loadaddr $bootfile;" \ 919 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 920 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 921 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 922 CONFIG_BOOTMODE 923 924 #if defined(CONFIG_P1010RDB_PA) 925 #define CONFIG_BOOTMODE \ 926 "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ 927 "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \ 928 "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ 929 "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \ 930 "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \ 931 "mw.b ffb00011 0; mw.b ffb00017 1; reset\0" 932 933 #elif defined(CONFIG_P1010RDB_PB) 934 #define CONFIG_BOOTMODE \ 935 "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ 936 "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \ 937 "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ 938 "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \ 939 "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \ 940 "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \ 941 "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \ 942 "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \ 943 "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \ 944 "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0" 945 #endif 946 947 #define CONFIG_RAMBOOTCOMMAND \ 948 "setenv bootargs root=/dev/ram rw " \ 949 "console=$consoledev,$baudrate $othbootargs; " \ 950 "tftp $ramdiskaddr $ramdiskfile;" \ 951 "tftp $loadaddr $bootfile;" \ 952 "tftp $fdtaddr $fdtfile;" \ 953 "bootm $loadaddr $ramdiskaddr $fdtaddr" 954 955 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 956 957 #include <asm/fsl_secure_boot.h> 958 959 #endif /* __CONFIG_H */ 960