1 /* 2 * Copyright (c) 2012 Michael Walle 3 * Michael Walle <michael@walle.cc> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _CONFIG_LSXL_H 9 #define _CONFIG_LSXL_H 10 11 /* 12 * Version number information 13 */ 14 #if defined(CONFIG_LSCHLV2) 15 #define CONFIG_IDENT_STRING " LS-CHLv2" 16 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 17 #define CONFIG_MACH_TYPE 3006 18 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 19 #elif defined(CONFIG_LSXHL) 20 #define CONFIG_IDENT_STRING " LS-XHL" 21 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 22 #define CONFIG_MACH_TYPE 2663 23 /* CONFIG_SYS_TCLK is 200000000 by default */ 24 #else 25 #error "unknown board" 26 #endif 27 28 /* 29 * General configuration options 30 */ 31 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 32 #define CONFIG_KW88F6281 /* SOC Name */ 33 34 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 35 #define CONFIG_MISC_INIT_R 36 #define CONFIG_SHOW_BOOT_PROGRESS 37 38 #define CONFIG_RANDOM_MACADDR 39 #define CONFIG_LIB_RAND 40 #define CONFIG_KIRKWOOD_GPIO 41 #define CONFIG_OF_LIBFDT 42 43 #define CONFIG_SYS_NO_FLASH 44 #define CONFIG_SYS_HUSH_PARSER 45 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 46 #define CONFIG_SYS_CONSOLE_INFO_QUIET 47 48 /* 49 * Enable u-boot API for standalone programs. 50 */ 51 #define CONFIG_API 52 53 /* 54 * Commands configuration 55 */ 56 #include <config_cmd_default.h> 57 #define CONFIG_CMD_DHCP 58 #define CONFIG_CMD_ELF 59 #define CONFIG_CMD_ENV 60 #define CONFIG_CMD_EXT2 61 #define CONFIG_CMD_FAT 62 #define CONFIG_CMD_IDE 63 #define CONFIG_CMD_PING 64 #define CONFIG_CMD_PING 65 #define CONFIG_CMD_SF 66 #define CONFIG_CMD_SPI 67 #define CONFIG_CMD_USB 68 #define CONFIG_CMD_FS_GENERIC 69 70 #define CONFIG_DOS_PARTITION 71 #define CONFIG_EFI_PARTITION 72 73 /* 74 * mv-common.h should be defined after CMD configs since it used them 75 * to enable certain macros 76 */ 77 #include "mv-common.h" 78 79 /* ST M25P40 */ 80 #undef CONFIG_SPI_FLASH_MACRONIX 81 #define CONFIG_SPI_FLASH_STMICRO 82 #undef CONFIG_ENV_SPI_MAX_HZ 83 #define CONFIG_ENV_SPI_MAX_HZ 25000000 84 #undef CONFIG_SF_DEFAULT_SPEED 85 #define CONFIG_SF_DEFAULT_SPEED 25000000 86 87 88 #undef CONFIG_SYS_PROMPT 89 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 90 91 /* 92 * Environment variables configurations 93 */ 94 #ifdef CONFIG_SPI_FLASH 95 #define CONFIG_SYS_MAX_FLASH_BANKS 1 96 #define CONFIG_SYS_MAX_FLASH_SECT 8 97 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 98 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 99 #else 100 #define CONFIG_ENV_IS_NOWHERE 101 #endif 102 103 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 104 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 105 106 /* 107 * Default environment variables 108 */ 109 #define CONFIG_LOADADDR 0x00800000 110 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" 111 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" 112 113 #if defined(CONFIG_LSXHL) 114 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 115 #elif defined(CONFIG_LSCHLV2) 116 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 117 #else 118 #error "Unsupported board" 119 #endif 120 121 #define CONFIG_EXTRA_ENV_SETTINGS \ 122 "bootsource=legacy\0" \ 123 "hdpart=0:1\0" \ 124 "kernel_addr=0x00800000\0" \ 125 "ramdisk_addr=0x01000000\0" \ 126 "fdt_addr=0x01ff0000\0" \ 127 "bootcmd_legacy=ide reset " \ 128 "&& load ide ${hdpart} 0x00100000 /uImage.buffalo " \ 129 "&& load ide ${hdpart} 0x00800000 /initrd.buffalo " \ 130 "&& bootm 0x00100000 0x00800000\0" \ 131 "bootcmd_net=bootp ${kernel_addr} uImage " \ 132 "&& tftpboot ${ramdisk_addr} uInitrd " \ 133 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 134 "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 135 "bootcmd_hdd=ide reset " \ 136 "&& load ide ${hdpart} ${kernel_addr} /uImage " \ 137 "&& load ide ${hdpart} ${ramdisk_addr} /uInitrd " \ 138 "&& load ide ${hdpart} ${fdt_addr} " \ 139 "/" CONFIG_FDTFILE " " \ 140 "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 141 "bootcmd_usb=usb start " \ 142 "&& load usb 0:1 ${kernel_addr} /uImage " \ 143 "&& load usb 0:1 ${ramdisk_addr} /uInitrd " \ 144 "&& load usb 0:1 ${fdt_addr} " \ 145 "/" CONFIG_FDTFILE " " \ 146 "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 147 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 148 "eraseenv=sf probe 0 " \ 149 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 150 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 151 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 152 "setenv autoload no " \ 153 "&& bootp " \ 154 "&& setenv ncip " \ 155 "&& setenv autoload ${autoload_old}; " \ 156 "setenv autoload_old\0" \ 157 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 158 "setenv ncip; setenv gatewayip; setenv ethact; " \ 159 "setenv bootfile; setenv dnsip; " \ 160 "setenv bootsource hdd; run ser\0" \ 161 "restore_env=run standard_env; saveenv; reset\0" \ 162 "ser=setenv stdin serial; setenv stdout serial; " \ 163 "setenv stderr serial\0" \ 164 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 165 "stdin=serial\0" \ 166 "stdout=serial\0" \ 167 "stderr=serial\0" 168 169 /* 170 * Ethernet Driver configuration 171 */ 172 #ifdef CONFIG_CMD_NET 173 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 174 #define CONFIG_PHY_BASE_ADR 7 175 #undef CONFIG_RESET_PHY_R 176 #endif /* CONFIG_CMD_NET */ 177 178 #ifdef CONFIG_CMD_IDE 179 #undef CONFIG_IDE_LED 180 #undef CONFIG_SYS_IDE_MAXBUS 181 #define CONFIG_SYS_IDE_MAXBUS 1 182 #undef CONFIG_SYS_IDE_MAXDEVICE 183 #define CONFIG_SYS_IDE_MAXDEVICE 1 184 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 185 #define CONFIG_SYS_64BIT_LBA 186 #endif 187 188 #endif /* _CONFIG_LSXL_H */ 189