1 /* 2 * siemens am33x common board options 3 * (C) Copyright 2013 Siemens Schweiz AG 4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * U-Boot file:/include/configs/am335x_evm.h 8 * 9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H 15 #define __CONFIG_SIEMENS_AM33X_COMMON_H 16 17 #include <asm/arch/omap.h> 18 19 #define CONFIG_DMA_COHERENT 20 #define CONFIG_DMA_COHERENT_SIZE (1 << 20) 21 22 #define CONFIG_ENV_SIZE (0x2000) 23 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) 24 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 25 #ifdef CONFIG_SIEMENS_MACH_TYPE 26 #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE 27 #endif 28 29 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 30 #define CONFIG_SETUP_MEMORY_TAGS 31 #define CONFIG_INITRD_TAG 32 33 /* commands to include */ 34 35 #define CONFIG_ENV_VARS_UBOOT_CONFIG 36 #ifndef CONFIG_SPL_BUILD 37 #define CONFIG_ROOTPATH "/opt/eldk" 38 #endif 39 40 #define CONFIG_ENV_OVERWRITE 1 41 42 #define CONFIG_SYS_LONGHELP 43 #define CONFIG_CMDLINE_EDITING 44 #define CONFIG_AUTO_COMPLETE 45 #define CONFIG_SYS_AUTOLOAD "yes" 46 47 /* Clock Defines */ 48 #define V_OSCK 24000000 /* Clock output from T2 */ 49 #define V_SCLK (V_OSCK) 50 51 /* We set the max number of command args high to avoid HUSH bugs. */ 52 #define CONFIG_SYS_MAXARGS 32 53 54 /* Console I/O Buffer Size */ 55 #define CONFIG_SYS_CBSIZE 1024 56 57 /* Boot Argument Buffer Size */ 58 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 59 60 /* 61 * memtest works on 8 MB in DRAM after skipping 32MB from 62 * start addr of ram disk 63 */ 64 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) 65 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ 66 + (8 * 1024 * 1024)) 67 68 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ 69 70 #define CONFIG_SPI 71 #define CONFIG_MTD_DEVICE 72 #define CONFIG_SF_DEFAULT_SPEED (75000000) 73 74 /* Physical Memory Map */ 75 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 76 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ 77 78 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 79 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ 80 GENERATED_GBL_DATA_SIZE) 81 /* Platform/Board specific defs */ 82 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 83 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 84 85 /* NS16550 Configuration */ 86 #ifdef CONFIG_SPL_BUILD 87 #define CONFIG_SYS_NS16550_SERIAL 88 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 89 #endif 90 #define CONFIG_SYS_NS16550_CLK (48000000) 91 #define CONFIG_SYS_NS16550_COM1 0x44e09000 92 #define CONFIG_SYS_NS16550_COM4 0x481a6000 93 94 #define CONFIG_SERIAL1 1 95 #define CONFIG_CONS_INDEX 1 96 97 /* I2C Configuration */ 98 #define CONFIG_I2C 99 #define CONFIG_SYS_I2C 100 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 101 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 102 103 /* Defines for SPL */ 104 #define CONFIG_SPL_FRAMEWORK 105 #define CONFIG_SPL_TEXT_BASE 0x402F0400 106 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 107 CONFIG_SPL_TEXT_BASE) 108 109 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 110 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 111 112 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 113 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 114 115 #define CONFIG_SPL_SPI_LOAD 116 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 117 118 #define CONFIG_SPL_NAND_AM33XX_BCH 119 #define CONFIG_SPL_NAND_BASE 120 #define CONFIG_SPL_NAND_DRIVERS 121 #define CONFIG_SPL_NAND_ECC 122 #define CONFIG_SYS_NAND_ONFI_DETECTION 123 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 124 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 125 CONFIG_SYS_NAND_PAGE_SIZE) 126 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 127 #define CONFIG_SYS_NAND_OOBSIZE 64 128 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 129 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 130 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 131 10, 11, 12, 13, 14, 15, 16, 17, \ 132 18, 19, 20, 21, 22, 23, 24, 25, \ 133 26, 27, 28, 29, 30, 31, 32, 33, \ 134 34, 35, 36, 37, 38, 39, 40, 41, \ 135 42, 43, 44, 45, 46, 47, 48, 49, \ 136 50, 51, 52, 53, 54, 55, 56, 57, } 137 138 #define CONFIG_SYS_NAND_ECCSIZE 512 139 #define CONFIG_SYS_NAND_ECCBYTES 14 140 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 141 142 #define CONFIG_SYS_NAND_ECCSTEPS 4 143 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ 144 CONFIG_SYS_NAND_ECCSTEPS) 145 146 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 147 148 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 149 150 /* 151 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 152 * 64 bytes before this address should be set aside for u-boot.img's 153 * header. That is 0x800FFFC0--0x80100000 should not be used for any 154 * other needs. 155 */ 156 #define CONFIG_SYS_TEXT_BASE 0x80100000 157 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 158 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 159 160 /* 161 * Since SPL did pll and ddr initialization for us, 162 * we don't need to do it twice. 163 */ 164 #ifndef CONFIG_SPL_BUILD 165 #define CONFIG_SKIP_LOWLEVEL_INIT 166 #endif 167 168 #ifndef CONFIG_SPL_BUILD 169 /* 170 * USB configuration 171 */ 172 #define CONFIG_USB_MUSB_DSPS 173 #define CONFIG_USB_MUSB_PIO_ONLY 174 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 175 176 #define CONFIG_AM335X_USB0 177 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL 178 #define CONFIG_AM335X_USB1 179 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 180 181 /* USB DRACO ID as default */ 182 #define CONFIG_USBD_HS 183 184 /* USB Device Firmware Update support */ 185 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) 186 #define DFU_MANIFEST_POLL_TIMEOUT 25000 187 188 #endif /* CONFIG_SPL_BUILD */ 189 190 /* 191 * Default to using SPI for environment, etc. We have multiple copies 192 * of SPL as the ROM will check these locations. 193 * 0x0 - 0x20000 : First copy of SPL 194 * 0x20000 - 0x40000 : Second copy of SPL 195 * 0x40000 - 0x60000 : Third copy of SPL 196 * 0x60000 - 0x80000 : Fourth copy of SPL 197 * 0x80000 - 0xDF000 : U-Boot 198 * 0xDF000 - 0xE0000 : U-Boot Environment 199 * 0xE0000 - 0x442000 : Linux Kernel 200 * 0x442000 - 0x800000 : Userland 201 */ 202 #if defined(CONFIG_SPI_BOOT) 203 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 204 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ 205 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 206 #endif /* SPI support */ 207 208 #define CONFIG_DRIVER_TI_CPSW 209 #define CONFIG_MII 210 #define CONFIG_BOOTP_DEFAULT 211 #define CONFIG_BOOTP_DNS 212 #define CONFIG_BOOTP_DNS2 213 #define CONFIG_BOOTP_SEND_HOSTNAME 214 #define CONFIG_BOOTP_GATEWAY 215 #define CONFIG_BOOTP_SUBNETMASK 216 #define CONFIG_NET_RETRY_COUNT 10 217 218 /* NAND support */ 219 #ifdef CONFIG_NAND 220 /* UBI Support */ 221 #ifndef CONFIG_SPL_BUILD 222 #define CONFIG_MTD_PARTITIONS 223 #define CONFIG_MTD_DEVICE 224 #endif 225 226 /* Commen environment */ 227 #define CONFIG_PREBOOT 228 #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ 229 "setenv bootargs ${bootargs};" \ 230 "mtdparts default;" \ 231 "draco_led 1;" \ 232 "dfu 0 nand 0;" \ 233 "draco_led 0;\0" \ 234 235 #define COMMON_ENV_NAND_BOOT \ 236 "nand_boot=echo Booting from nand; " \ 237 "if test ${upgrade_available} -eq 1; then " \ 238 "if test ${bootcount} -gt ${bootlimit}; " \ 239 "then " \ 240 "setenv upgrade_available 0;" \ 241 "setenv ${partitionset_active} true;" \ 242 "if test -n ${A}; then " \ 243 "setenv partitionset_active B; " \ 244 "env delete A; " \ 245 "fi;" \ 246 "if test -n ${B}; then " \ 247 "setenv partitionset_active A; " \ 248 "env delete B; " \ 249 "fi;" \ 250 "saveenv; " \ 251 "fi;" \ 252 "fi;" \ 253 "echo set ${partitionset_active}...;" \ 254 "run nand_args; " 255 256 #define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \ 257 "flash_self_test=setenv testargs test; " \ 258 "run nand_boot\0" \ 259 "dfu_start=echo Preparing for dfu mode ...; " \ 260 "run dfu_args; \0" 261 262 #define COMMON_ENV_SETTINGS \ 263 "verify=no \0" \ 264 "project_dir=targetdir\0" \ 265 "upgrade_available=0\0" \ 266 "altbootcmd=run bootcmd\0" \ 267 "bootlimit=3\0" \ 268 "partitionset_active=A\0" \ 269 "loadaddr=0x82000000\0" \ 270 "kloadaddr=0x81000000\0" \ 271 "script_addr=0x81900000\0" \ 272 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ 273 "nfsopts=nolock rw\0" \ 274 "ip_method=none\0" \ 275 "bootenv=uEnv.txt\0" \ 276 "bootargs_defaults=setenv bootargs " \ 277 "console=${console} " \ 278 "${testargs} " \ 279 "${optargs}\0" \ 280 "siemens_help=echo; "\ 281 "echo Type 'run flash_self' to use kernel and root " \ 282 "filesystem on memory; echo Type 'run flash_self_test' to " \ 283 "use kernel and root filesystem on memory, boot in test " \ 284 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ 285 "from memory and root filesystem over NFS; echo Type " \ 286 "'run net_nfs' to get Kernel over TFTP and mount root " \ 287 "filesystem over NFS; " \ 288 "echo Set partitionset_active variable to 'A' " \ 289 "or 'B' to select kernel and rootfs partition; " \ 290 "echo" \ 291 "\0" 292 293 /* 294 * Variant 1 partition layout 295 * chip-size = 256MiB 296 *| name | size | address area | 297 *------------------------------------------------------- 298 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 299 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 300 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 301 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 302 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 303 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | 304 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | 305 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | 306 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | 307 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | 308 *------------------------------------------------------- 309 */ 310 #define MTDIDS_NAME_STR "omap2-nand.0" 311 #define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR 312 #define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \ 313 "128k(spl)," \ 314 "128k(spl.backup1)," \ 315 "128k(spl.backup2)," \ 316 "128k(spl.backup3)," \ 317 "1920k(u-boot)," \ 318 "128k(uboot.env)," \ 319 "5120k(kernel_a)," \ 320 "5120k(kernel_b)," \ 321 "8192k(mtdoops)," \ 322 "-(rootfs)" 323 324 #define DFU_ALT_INFO_NAND_V1 \ 325 "spl part 0 1;" \ 326 "spl.backup1 part 0 2;" \ 327 "spl.backup2 part 0 3;" \ 328 "spl.backup3 part 0 4;" \ 329 "u-boot part 0 5;" \ 330 "u-boot.env part 0 6;" \ 331 "kernel_a part 0 7;" \ 332 "kernel_b part 0 8;" \ 333 "rootfs partubi 0 10" 334 335 #define CONFIG_ENV_SETTINGS_NAND_V1 \ 336 "nand_active_ubi_vol=rootfs_a\0" \ 337 "nand_active_ubi_vol_A=rootfs_a\0" \ 338 "nand_active_ubi_vol_B=rootfs_b\0" \ 339 "nand_root_fs_type=ubifs rootwait=1\0" \ 340 "nand_src_addr=0x280000\0" \ 341 "nand_src_addr_A=0x280000\0" \ 342 "nand_src_addr_B=0x780000\0" \ 343 "nand_args=run bootargs_defaults;" \ 344 "mtdparts default;" \ 345 "setenv ${partitionset_active} true;" \ 346 "if test -n ${A}; then " \ 347 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \ 348 "setenv nand_src_addr ${nand_src_addr_A};" \ 349 "fi;" \ 350 "if test -n ${B}; then " \ 351 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \ 352 "setenv nand_src_addr ${nand_src_addr_B};" \ 353 "fi;" \ 354 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 355 "ubi.mtd=9,${ubi_off};" \ 356 "setenv bootargs ${bootargs} " \ 357 "root=${nand_root} noinitrd ${mtdparts} " \ 358 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 359 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 360 "=mtdoops\0" \ 361 COMMON_ENV_DFU_ARGS \ 362 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \ 363 COMMON_ENV_NAND_BOOT \ 364 "nand read.i ${kloadaddr} ${nand_src_addr} " \ 365 "${nand_img_size}; bootm ${kloadaddr}\0" \ 366 COMMON_ENV_NAND_CMDS 367 368 #define CONFIG_ENV_SETTINGS_V1 \ 369 COMMON_ENV_SETTINGS \ 370 "net_args=run bootargs_defaults;" \ 371 "mtdparts default;" \ 372 "setenv bootfile ${project_dir}/kernel/uImage;" \ 373 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 374 "setenv bootargs ${bootargs} " \ 375 "root=/dev/nfs ${mtdparts} " \ 376 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 377 "ip=${ipaddr}:${serverip}:" \ 378 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 379 "net_nfs=echo Booting from network ...; " \ 380 "run net_args; " \ 381 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 382 "bootm ${kloadaddr}\0" 383 384 /* 385 * Variant 2 partition layout 386 * chip-size = 256MiB or 512 MiB 387 *| name | size | address area | 388 *------------------------------------------------------- 389 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 390 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 391 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 392 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 393 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 394 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 395 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 396 *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff | 397 *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | 398 *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff | 399 *------------------------------------------------------- 400 */ 401 402 #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ 403 "128k(spl)," \ 404 "128k(spl.backup1)," \ 405 "128k(spl.backup2)," \ 406 "128k(spl.backup3)," \ 407 "1920k(u-boot)," \ 408 "512k(u-boot.env0)," \ 409 "512k(u-boot.env1)," \ 410 "512k(mtdoops)," \ 411 "-(rootfs)" 412 413 #define DFU_ALT_INFO_NAND_V2 \ 414 "spl part 0 1;" \ 415 "spl.backup1 part 0 2;" \ 416 "spl.backup2 part 0 3;" \ 417 "spl.backup3 part 0 4;" \ 418 "u-boot part 0 5;" \ 419 "u-boot.env0 part 0 6;" \ 420 "u-boot.env1 part 0 7;" \ 421 "rootfs partubi 0 9" \ 422 423 #define CONFIG_ENV_SETTINGS_NAND_V2 \ 424 "nand_active_ubi_vol=rootfs_a\0" \ 425 "rootfs_name=rootfs\0" \ 426 "kernel_name=uImage\0"\ 427 "nand_root_fs_type=ubifs rootwait=1\0" \ 428 "nand_args=run bootargs_defaults;" \ 429 "mtdparts default;" \ 430 "setenv ${partitionset_active} true;" \ 431 "if test -n ${A}; then " \ 432 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ 433 "fi;" \ 434 "if test -n ${B}; then " \ 435 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ 436 "fi;" \ 437 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 438 "ubi.mtd=rootfs,2048;" \ 439 "setenv bootargs ${bootargs} " \ 440 "root=${nand_root} noinitrd ${mtdparts} " \ 441 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 442 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 443 "=mtdoops\0" \ 444 COMMON_ENV_DFU_ARGS \ 445 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ 446 COMMON_ENV_NAND_BOOT \ 447 "ubi part rootfs ${ubi_off};" \ 448 "ubifsmount ubi0:${nand_active_ubi_vol};" \ 449 "ubifsload ${kloadaddr} boot/${kernel_name};" \ 450 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ 451 "bootm ${kloadaddr} - ${loadaddr}\0" \ 452 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ 453 "bootm ${kloadaddr} - ${loadaddr}\0" \ 454 COMMON_ENV_NAND_CMDS 455 456 #define CONFIG_ENV_SETTINGS_V2 \ 457 COMMON_ENV_SETTINGS \ 458 "net_args=run bootargs_defaults;" \ 459 "mtdparts default;" \ 460 "setenv bootfile ${project_dir}/kernel/uImage;" \ 461 "setenv bootdtb ${project_dir}/kernel/dtb;" \ 462 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 463 "setenv bootargs ${bootargs} " \ 464 "root=/dev/nfs ${mtdparts} " \ 465 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 466 "ip=${ipaddr}:${serverip}:" \ 467 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 468 "net_nfs=echo Booting from network ...; " \ 469 "run net_args; " \ 470 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 471 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ 472 "bootm ${kloadaddr} - ${loadaddr}\0" 473 474 /* 475 * Variant 3 partition layout 476 * chip-size = 512MiB 477 *| name | size | address area | 478 *------------------------------------------------------- 479 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 480 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 481 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 482 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 483 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 484 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 485 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 486 *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff | 487 *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff | 488 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff | 489 *------------------------------------------------------- 490 */ 491 492 #define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \ 493 "128k(spl)," \ 494 "128k(spl.backup1)," \ 495 "128k(spl.backup2)," \ 496 "128k(spl.backup3)," \ 497 "1920k(u-boot)," \ 498 "512k(u-boot.env0)," \ 499 "512k(u-boot.env1)," \ 500 "300m(rootfs)," \ 501 "512k(mtdoops)," \ 502 "-(configuration)" 503 504 #define CONFIG_NAND_OMAP_GPMC 505 #define CONFIG_NAND_OMAP_ELM 506 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ 507 /* to access nand at */ 508 /* CS0 */ 509 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND 510 devices */ 511 #if !defined(CONFIG_SPI_BOOT) 512 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ 513 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 514 #endif 515 #endif 516 517 /* Reboot after 60 sec if bootcmd fails */ 518 #define CONFIG_RESET_TO_RETRY 519 #define CONFIG_BOOT_RETRY_TIME 60 520 521 #define CONFIG_BOOTCOUNT_LIMIT 522 #define CONFIG_BOOTCOUNT_ENV 523 524 #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ 525