SPDX: Convert all of our single license tags to Linux Kernel styleWhen U-Boot started using SPDX tags we were among the early adopters andthere weren't a lot of other examples to borrow from. So
SPDX: Convert all of our single license tags to Linux Kernel styleWhen U-Boot started using SPDX tags we were among the early adopters andthere weren't a lot of other examples to borrow from. So we picked thearea of the file that usually had a full license text and replaced itwith an appropriate SPDX-License-Identifier: entry. Since then, theLinux Kernel has adopted SPDX tags and they place it as the very firstline in a file (except where shebangs are used, then it's second line)and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibilityand in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declaredlicense in the tag as both the before and after are identical in tagcontents. There's also a few places where I found we did not have a tagand have introduced one.Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRWe have a large number of places where while we historically referencedgd in the code we no longer do, as well as cases where the code added
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRWe have a large number of places where while we historically referencedgd in the code we no longer do, as well as cases where the code addedthat line "just in case" during development and never dropped it.Signed-off-by: Tom Rini <trini@konsulko.com>
libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Thomas reported U-Boot failed to build host tools if libfdt-develpackage is installed because tools include libfdt headers from/us
libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Thomas reported U-Boot failed to build host tools if libfdt-develpackage is installed because tools include libfdt headers from/usr/include/ instead of using internal ones.This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.hand replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h>Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
env: Rename getenv/_f() to env_get()We are now using an env_ prefix for environment functions. Rename thesetwo functions for consistency. Also add function comments in common.h.Quite a few place
env: Rename getenv/_f() to env_get()We are now using an env_ prefix for environment functions. Rename thesetwo functions for consistency. Also add function comments in common.h.Quite a few places use getenv() in a condition context, provoking awarning from checkpatch. These are fixed up in this patch also.Suggested-by: Wolfgang Denk <wd@denx.de>Signed-off-by: Simon Glass <sjg@chromium.org>
powerpc: remove 4xx supportThere was for long time no activity in the 4xx area.We need to go further and convert to Kconfig, but itturned out, nobody is interested anymore in 4xx,so remove it.
powerpc: remove 4xx supportThere was for long time no activity in the 4xx area.We need to go further and convert to Kconfig, but itturned out, nobody is interested anymore in 4xx,so remove it.Signed-off-by: Heiko Schocher <hs@denx.de>
board_f: Rename initdram() to dram_init()This allows us to use the same DRAM init function on all archs. Add adummy function for arc, which does not use DRAM init here.Signed-off-by: Simon Glass
board_f: Rename initdram() to dram_init()This allows us to use the same DRAM init function on all archs. Add adummy function for arc, which does not use DRAM init here.Signed-off-by: Simon Glass <sjg@chromium.org>[trini: Dummy function on nios2]Signed-off-by: Tom Rini <trini@konsulko.com>
board_f: Drop return value from initdram()At present we cannot use this function as an init sequence call without awrapper, since it returns the RAM size. Adjust it to set the RAM size inglobal_d
board_f: Drop return value from initdram()At present we cannot use this function as an init sequence call without awrapper, since it returns the RAM size. Adjust it to set the RAM size inglobal_data instead, and return 0 on success.Signed-off-by: Simon Glass <sjg@chromium.org>Reviewed-by: Stefan Roese <sr@denx.de>
board_f: Drop board_type parameter from initdram()It looks like only cm5200 and tqm8xx use this feature, so we don't reallyneed it in generic code. Drop it and have the users access gd->board_type
board_f: Drop board_type parameter from initdram()It looks like only cm5200 and tqm8xx use this feature, so we don't reallyneed it in generic code. Drop it and have the users access gd->board_typedirectly.Signed-off-by: Simon Glass <sjg@chromium.org>Reviewed-by: Stefan Roese <sr@denx.de>
powerpc: P2020: Remove macro CONFIG_P2020Replace CONFIG_P2020 with ARCH_P2020 in Kconfig and clean upexisting macros.Signed-off-by: York Sun <york.sun@nxp.com>
powerpc: MPC8572: Remove macro CONFIG_MPC8572Replace CONFIG_MPC8572 with ARCH_MPC8572 in Kconfig and clean up existingmacros.Signed-off-by: York Sun <york.sun@nxp.com>
powerpc: MPC8548: Move CONFIG_MPC8548 to Kconfig optionReplace CONFIG_MPC8548 with ARCH_MPC8548 in Kconfig.Signed-off-by: York Sun <york.sun@nxp.com>
mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_dataThese functions are part of the Linux 4.6 sync. They are being addedbefore the main sync patch in order to make it easier to ad
mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_dataThese functions are part of the Linux 4.6 sync. They are being addedbefore the main sync patch in order to make it easier to address theissue across all NAND drivers (many/most of which do not closely tracktheir Linux counterparts) separately from other merge issues.Signed-off-by: Scott Wood <oss@buserror.net>
Add more SPDX-License-Identifier tagsIn a number of places we had wordings of the GPL (or LGPL in a fewcases) license text that were split in such a way that it wasn't caughtpreviously. Convert
Add more SPDX-License-Identifier tagsIn a number of places we had wordings of the GPL (or LGPL in a fewcases) license text that were split in such a way that it wasn't caughtpreviously. Convert all of these to the correct SPDX-License-Identifiertag.Signed-off-by: Tom Rini <trini@konsulko.com>
Move console definitions into a new console.h fileThe console includes a global variable and several functions that are onlyused by a small subset of U-Boot files. Before adding more functions, mo
Move console definitions into a new console.h fileThe console includes a global variable and several functions that are onlyused by a small subset of U-Boot files. Before adding more functions, movethe definitions into their own header file.Signed-off-by: Simon Glass <sjg@chromium.org>
powerpc: xes: Add maintainerAdd Peter Tyser as the maintainer of Extreme Engineering Solutions products.Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
fdt: Allow ft_board_setup() to report failureThis function can fail if the device tree runs out of space. Rather thansilently booting with an incomplete device tree, allow the failure to bedetect
fdt: Allow ft_board_setup() to report failureThis function can fail if the device tree runs out of space. Rather thansilently booting with an incomplete device tree, allow the failure to bedetected.Unfortunately this involves changing a lot of places in the code. I havenot changed behvaiour to return an error where one is not currentlyreturned, to avoid unexpected breakage.Eventually it would be nice to allow boards to register functions to becalled to update the device tree. This would avoid all the many functionsto do this. However it's not clear yet if this should be done using drivermodel or with a linker list. This work is left for later.Signed-off-by: Simon Glass <sjg@chromium.org>Acked-by: Anatolij Gustschin <agust@denx.de>
MAINTAINERS: comment out blank M: fieldSince commit ddaf5c8f3030050fcd356a1e49e3ee8f8f52c6d4(patman: RunPipe() should not pipe stdout/stderr unless asked),Patman spits lots of "Invalid MAINTAINER
MAINTAINERS: comment out blank M: fieldSince commit ddaf5c8f3030050fcd356a1e49e3ee8f8f52c6d4(patman: RunPipe() should not pipe stdout/stderr unless asked),Patman spits lots of "Invalid MAINTAINERS address: '-'"error messages for patches with global changes.It takes too long for Patman to process them.Anyway, "M: -" does not carry any important information.Rather, it is just like a place holder in case of assigninga new board maintainer. Let's comment out.This commit can be reproduced by the following command:find . -name MAINTAINERS | xargs sed -i -e '/^M:[[:blank:]]*-$/s/^/#/'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in arch and board Kconfig files.This commit can be easily reproduced by the following command:find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string//}'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS for
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS format as in Linux Kernel would be nicebecause we can crib the scripts/get_maintainer.pl script.After some discussion, we chose to put a MAINTAINERS file under eachboard directory, not the top-level one because we want to collectrelevant information for a board into a single place.TODO:Modify get_maintainer.pl to scan multiple MAINTAINERS files.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Suggested-by: Tom Rini <trini@ti.com>Acked-by: Simon Glass <sjg@chromium.org>
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board(This commit was automatically generated by a conversion scriptbased on boards.cfg)In Linux Kernel, defconfig files are located underarch/${ARCH}/configs/ directory.It works in Linux Kernel since ARCH is always given from thecommand line for cross compile.But in U-Boot, ARCH is not given from the command line.Which means we cannot know ARCH until the board configuration is done.That is why all the "*_defconfig" files should be gathered into asingle directory ./configs/.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Acked-by: Simon Glass <sjg@chromium.org>
Driver/DDR: Moving Freescale DDR driver to a common driverFreescale DDR driver has been used for mpc83xx, mpc85xx, mpc86xx SoCs.The similar DDR controllers will be used for ARM-based SoCs.Signed
Driver/DDR: Moving Freescale DDR driver to a common driverFreescale DDR driver has been used for mpc83xx, mpc85xx, mpc86xx SoCs.The similar DDR controllers will be used for ARM-based SoCs.Signed-off-by: York Sun <yorksun@freescale.com>
board: powerpc: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Wolfgang Denk <wd@denx.de>Cc: Kim Phillips <kim.phillips@freescale.com>Cc: York Sun
board: powerpc: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Wolfgang Denk <wd@denx.de>Cc: Kim Phillips <kim.phillips@freescale.com>Cc: York Sun <yorksun@freescale.com>Cc: Stefan Roese <sr@denx.de>
powerpc: Fix CamelCase warnings in DDR related codeSome DDR related structures present in fsl_ddr_dimm_params.h, fsl_ddr_sdram.h, ddr_spd.hhas various parameters with embedded acronyms capitalized
powerpc: Fix CamelCase warnings in DDR related codeSome DDR related structures present in fsl_ddr_dimm_params.h, fsl_ddr_sdram.h, ddr_spd.hhas various parameters with embedded acronyms capitalized that trigger the CamelCasewarning in checkpatch.plConvert those variable names to smallcase naming convention and modify all fileswhich are using these structures with modified structures.Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Coding Style cleanup: remove trailing white spaceSigned-off-by: Wolfgang Denk <wd@denx.de>
powerpc: Fix CamelCase checkpatch warnings85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions.because of this code checkpatch script generates "WARNING: Avoid CamelCas
powerpc: Fix CamelCase checkpatch warnings85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions.because of this code checkpatch script generates "WARNING: Avoid CamelCase".Convert variables name to normal naming convention and modify board, driverfiles with updated the new structure.Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>Acked-by: York Sun <yorksun@freescale.com>
1234