1 /* 2 * (C) Copyright 2000-2009 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __COMMON_H_ 9 #define __COMMON_H_ 1 10 11 #ifndef __ASSEMBLY__ /* put C only stuff in this section */ 12 13 typedef unsigned char uchar; 14 typedef volatile unsigned long vu_long; 15 typedef volatile unsigned short vu_short; 16 typedef volatile unsigned char vu_char; 17 18 /* Allow sharing constants with type modifiers between C and assembly. */ 19 #define _AC(X, Y) (X##Y) 20 21 #include <config.h> 22 #include <errno.h> 23 #include <time.h> 24 #include <asm-offsets.h> 25 #include <linux/bitops.h> 26 #include <linux/bug.h> 27 #include <linux/delay.h> 28 #include <linux/types.h> 29 #include <linux/printk.h> 30 #include <linux/string.h> 31 #include <linux/stringify.h> 32 #include <asm/ptrace.h> 33 #include <stdarg.h> 34 #include <stdio.h> 35 #include <linux/kernel.h> 36 37 #include <part.h> 38 #include <flash.h> 39 #include <image.h> 40 41 /* Bring in printf format macros if inttypes.h is included */ 42 #define __STDC_FORMAT_MACROS 43 44 #ifdef __LP64__ 45 #define CONFIG_SYS_SUPPORT_64BIT_DATA 46 #endif 47 48 #include <log.h> 49 50 typedef void (interrupt_handler_t)(void *); 51 52 #include <asm/u-boot.h> /* boot information for Linux kernel */ 53 #include <asm/global_data.h> /* global data used for startup functions */ 54 55 #if defined(CONFIG_ENV_IS_EMBEDDED) 56 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 57 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ 58 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ 59 defined(CONFIG_ENV_IS_IN_NVRAM) 60 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) 61 #else 62 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 63 #endif 64 65 /* startup functions, used in: 66 * common/board_f.c 67 * common/init/board_init.c 68 * common/board_r.c 69 * common/board_info.c 70 */ 71 #include <init.h> 72 73 /* 74 * Function Prototypes 75 */ 76 void hang (void) __attribute__ ((noreturn)); 77 78 int cpu_init(void); 79 80 #include <display_options.h> 81 82 /* common/main.c */ 83 void main_loop (void); 84 int run_command(const char *cmd, int flag); 85 int run_command_repeatable(const char *cmd, int flag); 86 87 /** 88 * Run a list of commands separated by ; or even \0 89 * 90 * Note that if 'len' is not -1, then the command does not need to be nul 91 * terminated, Memory will be allocated for the command in that case. 92 * 93 * @param cmd List of commands to run, each separated bu semicolon 94 * @param len Length of commands excluding terminator if known (-1 if not) 95 * @param flag Execution flags (CMD_FLAG_...) 96 * @return 0 on success, or != 0 on error. 97 */ 98 int run_command_list(const char *cmd, int len, int flag); 99 100 int checkflash(void); 101 int checkdram(void); 102 extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ 103 extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ 104 int mdm_init(void); 105 106 /** 107 * Show the DRAM size in a board-specific way 108 * 109 * This is used by boards to display DRAM information in their own way. 110 * 111 * @param size Size of DRAM (which should be displayed along with other info) 112 */ 113 void board_show_dram(phys_size_t size); 114 115 /** 116 * arch_fixup_fdt() - Write arch-specific information to fdt 117 * 118 * Defined in arch/$(ARCH)/lib/bootm-fdt.c 119 * 120 * @blob: FDT blob to write to 121 * @return 0 if ok, or -ve FDT_ERR_... on failure 122 */ 123 int arch_fixup_fdt(void *blob); 124 125 /* common/flash.c */ 126 void flash_perror (int); 127 128 /* common/cmd_source.c */ 129 int source (ulong addr, const char *fit_uname); 130 131 extern ulong load_addr; /* Default Load Address */ 132 extern ulong save_addr; /* Default Save Address */ 133 extern ulong save_size; /* Default Save Size */ 134 135 /* common/cmd_net.c */ 136 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); 137 138 /* common/cmd_fat.c */ 139 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []); 140 141 /* common/cmd_ext2.c */ 142 int do_ext2load(cmd_tbl_t *, int, int, char * const []); 143 144 /* common/cmd_nvedit.c */ 145 int env_init (void); 146 void env_relocate (void); 147 int envmatch (uchar *, int); 148 149 /** 150 * env_get() - Look up the value of an environment variable 151 * 152 * In U-Boot proper this can be called before relocation (which is when the 153 * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that 154 * case this function calls env_get_f(). 155 * 156 * @varname: Variable to look up 157 * @return value of variable, or NULL if not found 158 */ 159 char *env_get(const char *varname); 160 161 /** 162 * env_get_f() - Look up the value of an environment variable (early) 163 * 164 * This function is called from env_get() if the environment has not been 165 * loaded yet (GD_FLG_ENV_READY flag is 0). Some environment locations will 166 * support reading the value (slowly) and some will not. 167 * 168 * @varname: Variable to look up 169 * @return value of variable, or NULL if not found 170 */ 171 int env_get_f(const char *name, char *buf, unsigned len); 172 173 /** 174 * env_get_ulong() - Return an environment variable as an integer value 175 * 176 * Most U-Boot environment variables store hex values. For those which store 177 * (e.g.) base-10 integers, this function can be used to read the value. 178 * 179 * @name: Variable to look up 180 * @base: Base to use (e.g. 10 for base 10, 2 for binary) 181 * @default_val: Default value to return if no value is found 182 * @return the value found, or @default_val if none 183 */ 184 ulong env_get_ulong(const char *name, int base, ulong default_val); 185 186 /** 187 * env_get_hex() - Return an environment variable as a hex value 188 * 189 * Decode an environment as a hex number (it may or may not have a 0x 190 * prefix). If the environment variable cannot be found, or does not start 191 * with hex digits, the default value is returned. 192 * 193 * @varname: Variable to decode 194 * @default_val: Value to return on error 195 */ 196 ulong env_get_hex(const char *varname, ulong default_val); 197 198 /* 199 * Read an environment variable as a boolean 200 * Return -1 if variable does not exist (default to true) 201 */ 202 int env_get_yesno(const char *var); 203 204 /** 205 * env_set() - set an environment variable 206 * 207 * This sets or deletes the value of an environment variable. For setting the 208 * value the variable is created if it does not already exist. 209 * 210 * @varname: Variable to adjust 211 * @value: Value to set for the variable, or NULL or "" to delete the variable 212 * @return 0 if OK, 1 on error 213 */ 214 int env_set(const char *varname, const char *value); 215 216 /** 217 * env_set_ulong() - set an environment variable to an integer 218 * 219 * @varname: Variable to adjust 220 * @value: Value to set for the variable (will be converted to a string) 221 * @return 0 if OK, 1 on error 222 */ 223 int env_set_ulong(const char *varname, ulong value); 224 225 /** 226 * env_set_hex() - set an environment variable to a hex value 227 * 228 * @varname: Variable to adjust 229 * @value: Value to set for the variable (will be converted to a hex string) 230 * @return 0 if OK, 1 on error 231 */ 232 int env_set_hex(const char *varname, ulong value); 233 234 /** 235 * env_set_addr - Set an environment variable to an address in hex 236 * 237 * @varname: Environment variable to set 238 * @addr: Value to set it to 239 * @return 0 if ok, 1 on error 240 */ 241 static inline int env_set_addr(const char *varname, const void *addr) 242 { 243 return env_set_hex(varname, (ulong)addr); 244 } 245 246 #ifdef CONFIG_AUTO_COMPLETE 247 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); 248 #endif 249 int get_env_id (void); 250 251 void pci_init_board(void); 252 253 /* common/exports.c */ 254 void jumptable_init(void); 255 256 /* common/kallsysm.c */ 257 const char *symbol_lookup(unsigned long addr, unsigned long *caddr); 258 259 /* common/memsize.c */ 260 long get_ram_size (long *, long); 261 phys_size_t get_effective_memsize(void); 262 263 /* $(BOARD)/$(BOARD).c */ 264 void reset_phy (void); 265 void fdc_hw_init (void); 266 267 /* $(BOARD)/eeprom.c */ 268 #ifdef CONFIG_CMD_EEPROM 269 void eeprom_init (int bus); 270 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 271 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 272 #else 273 /* 274 * Some EEPROM code is depecated because it used the legacy I2C interface. Add 275 * some macros here so we don't have to touch every one of those uses 276 */ 277 #define eeprom_init(bus) 278 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) 279 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) 280 #endif 281 282 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) 283 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR 284 #endif 285 286 #if defined(CONFIG_MPC8XX_SPI) 287 extern void spi_init_f (void); 288 extern void spi_init_r (void); 289 extern ssize_t spi_read (uchar *, int, uchar *, int); 290 extern ssize_t spi_write (uchar *, int, uchar *, int); 291 #endif 292 293 /* $(BOARD)/$(BOARD).c */ 294 int board_early_init_f (void); 295 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */ 296 int board_late_init (void); 297 int board_postclk_init (void); /* after clocks/timebase, before env/serial */ 298 int board_early_init_r (void); 299 300 #if defined(CONFIG_SYS_DRAM_TEST) 301 int testdram(void); 302 #endif /* CONFIG_SYS_DRAM_TEST */ 303 304 /* $(CPU)/start.S */ 305 int icache_status (void); 306 void icache_enable (void); 307 void icache_disable(void); 308 int dcache_status (void); 309 void dcache_enable (void); 310 void dcache_disable(void); 311 void mmu_disable(void); 312 #if defined(CONFIG_ARM) 313 void relocate_code(ulong); 314 #else 315 void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn)); 316 #endif 317 ulong get_endaddr (void); 318 void trap_init (ulong); 319 320 /* $(CPU)/cpu.c */ 321 static inline int cpumask_next(int cpu, unsigned int mask) 322 { 323 for (cpu++; !((1 << cpu) & mask); cpu++) 324 ; 325 326 return cpu; 327 } 328 329 #define for_each_cpu(iter, cpu, num_cpus, mask) \ 330 for (iter = 0, cpu = cpumask_next(-1, mask); \ 331 iter < num_cpus; \ 332 iter++, cpu = cpumask_next(cpu, mask)) \ 333 334 int cpu_numcores (void); 335 int cpu_num_dspcores(void); 336 u32 cpu_mask (void); 337 u32 cpu_dsp_mask(void); 338 int is_core_valid (unsigned int); 339 340 void s_init(void); 341 342 int checkcpu (void); 343 int checkicache (void); 344 int checkdcache (void); 345 void upmconfig (unsigned int, unsigned int *, unsigned int); 346 ulong get_tbclk (void); 347 void reset_misc (void); 348 void reset_cpu (ulong addr); 349 void ft_cpu_setup(void *blob, bd_t *bd); 350 void ft_pci_setup(void *blob, bd_t *bd); 351 352 void smp_set_core_boot_addr(unsigned long addr, int corenr); 353 void smp_kick_all_cpus(void); 354 355 /* $(CPU)/serial.c */ 356 int serial_init (void); 357 void serial_setbrg (void); 358 void serial_putc (const char); 359 void serial_putc_raw(const char); 360 void serial_puts (const char *); 361 int serial_getc (void); 362 int serial_tstc (void); 363 364 /* $(CPU)/speed.c */ 365 int get_clocks (void); 366 ulong get_bus_freq (ulong); 367 int get_serial_clock(void); 368 369 /* $(CPU)/interrupts.c */ 370 int interrupt_init (void); 371 void timer_interrupt (struct pt_regs *); 372 void external_interrupt (struct pt_regs *); 373 void irq_install_handler(int, interrupt_handler_t *, void *); 374 void irq_free_handler (int); 375 void reset_timer (void); 376 377 /* Return value of monotonic microsecond timer */ 378 unsigned long timer_get_us(void); 379 380 void enable_interrupts (void); 381 int disable_interrupts (void); 382 383 /* $(CPU)/.../commproc.c */ 384 int dpram_init (void); 385 uint dpram_base(void); 386 uint dpram_base_align(uint align); 387 uint dpram_alloc(uint size); 388 uint dpram_alloc_align(uint size,uint align); 389 void bootcount_store (ulong); 390 ulong bootcount_load (void); 391 #define BOOTCOUNT_MAGIC 0xB001C041 392 393 /* $(CPU)/.../<eth> */ 394 void mii_init (void); 395 396 /* $(CPU)/.../lcd.c */ 397 ulong lcd_setmem (ulong); 398 399 /* $(CPU)/.../video.c */ 400 ulong video_setmem (ulong); 401 402 /* arch/$(ARCH)/lib/cache.c */ 403 void enable_caches(void); 404 void flush_cache (unsigned long, unsigned long); 405 void flush_dcache_all(void); 406 void flush_dcache_range(unsigned long start, unsigned long stop); 407 void invalidate_dcache_range(unsigned long start, unsigned long stop); 408 void invalidate_dcache_all(void); 409 void invalidate_icache_all(void); 410 411 enum { 412 /* Disable caches (else flush caches but leave them active) */ 413 CBL_DISABLE_CACHES = 1 << 0, 414 CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1, 415 416 CBL_ALL = 3, 417 }; 418 419 /** 420 * Clean up ready for linux 421 * 422 * @param flags Flags to control what is done 423 */ 424 int cleanup_before_linux_select(int flags); 425 426 /* arch/$(ARCH)/lib/ticks.S */ 427 uint64_t get_ticks(void); 428 void wait_ticks (unsigned long); 429 430 /* arch/$(ARCH)/lib/time.c */ 431 ulong usec2ticks (unsigned long usec); 432 ulong ticks2usec (unsigned long ticks); 433 434 /* lib/gunzip.c */ 435 int gzip_parse_header(const unsigned char *src, unsigned long len); 436 int gunzip(void *, int, unsigned char *, unsigned long *); 437 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, 438 int stoponerr, int offset); 439 440 /** 441 * gzwrite progress indicators: defined weak to allow board-specific 442 * overrides: 443 * 444 * gzwrite_progress_init called on startup 445 * gzwrite_progress called during decompress/write loop 446 * gzwrite_progress_finish called at end of loop to 447 * indicate success (retcode=0) or failure 448 */ 449 void gzwrite_progress_init(u64 expected_size); 450 451 void gzwrite_progress(int iteration, 452 u64 bytes_written, 453 u64 total_bytes); 454 455 void gzwrite_progress_finish(int retcode, 456 u64 totalwritten, 457 u64 totalsize, 458 u32 expected_crc, 459 u32 calculated_crc); 460 461 /** 462 * decompress and write gzipped image from memory to block device 463 * 464 * @param src compressed image address 465 * @param len compressed image length in bytes 466 * @param dev block device descriptor 467 * @param szwritebuf bytes per write (pad to erase size) 468 * @param startoffs offset in bytes of first write 469 * @param szexpected expected uncompressed length 470 * may be zero to use gzip trailer 471 * for files under 4GiB 472 */ 473 int gzwrite(unsigned char *src, int len, 474 struct blk_desc *dev, 475 unsigned long szwritebuf, 476 u64 startoffs, 477 u64 szexpected); 478 479 /* lib/lz4_wrapper.c */ 480 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn); 481 482 /* lib/qsort.c */ 483 void qsort(void *base, size_t nmemb, size_t size, 484 int(*compar)(const void *, const void *)); 485 int strcmp_compar(const void *, const void *); 486 487 /* lib/uuid.c */ 488 #include <uuid.h> 489 490 /* lib/vsprintf.c */ 491 #include <vsprintf.h> 492 493 /* lib/strmhz.c */ 494 char * strmhz(char *buf, unsigned long hz); 495 496 /* lib/crc32.c */ 497 #include <u-boot/crc.h> 498 499 /* lib/rand.c */ 500 #define RAND_MAX -1U 501 void srand(unsigned int seed); 502 unsigned int rand(void); 503 unsigned int rand_r(unsigned int *seedp); 504 505 /* 506 * STDIO based functions (can always be used) 507 */ 508 /* serial stuff */ 509 int serial_printf (const char *fmt, ...) 510 __attribute__ ((format (__printf__, 1, 2))); 511 512 /* lib/gzip.c */ 513 int gzip(void *dst, unsigned long *lenp, 514 unsigned char *src, unsigned long srclen); 515 int zzip(void *dst, unsigned long *lenp, unsigned char *src, 516 unsigned long srclen, int stoponerr, 517 int (*func)(unsigned long, unsigned long)); 518 519 /* lib/net_utils.c */ 520 #include <net.h> 521 static inline struct in_addr env_get_ip(char *var) 522 { 523 return string_to_ip(env_get(var)); 524 } 525 526 int pcmcia_init (void); 527 528 #ifdef CONFIG_LED_STATUS 529 # include <status_led.h> 530 #endif 531 532 #include <bootstage.h> 533 534 #ifdef CONFIG_SHOW_ACTIVITY 535 void show_activity(int arg); 536 #endif 537 538 /* Multicore arch functions */ 539 #ifdef CONFIG_MP 540 int cpu_status(int nr); 541 int cpu_reset(int nr); 542 int cpu_disable(int nr); 543 int cpu_release(int nr, int argc, char * const argv[]); 544 #endif 545 546 #else /* __ASSEMBLY__ */ 547 548 /* Drop a C type modifier (like in 3UL) for constants used in assembly. */ 549 #define _AC(X, Y) X 550 551 #endif /* __ASSEMBLY__ */ 552 553 /* Put only stuff here that the assembler can digest */ 554 555 /* Declare an unsigned long constant digestable both by C and an assembler. */ 556 #define UL(x) _AC(x, UL) 557 558 #ifdef CONFIG_POST 559 #define CONFIG_HAS_POST 560 #ifndef CONFIG_POST_ALT_LIST 561 #define CONFIG_POST_STD_LIST 562 #endif 563 #endif 564 565 #ifdef CONFIG_INIT_CRITICAL 566 #error CONFIG_INIT_CRITICAL is deprecated! 567 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. 568 #endif 569 570 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) 571 572 /* 573 * check_member() - Check the offset of a structure member 574 * 575 * @structure: Name of structure (e.g. global_data) 576 * @member: Name of member (e.g. baudrate) 577 * @offset: Expected offset in bytes 578 */ 579 #define check_member(structure, member, offset) _Static_assert( \ 580 offsetof(struct structure, member) == offset, \ 581 "`struct " #structure "` offset for `" #member "` is not " #offset) 582 583 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */ 584 #ifdef CONFIG_EFI_STUB 585 #define ll_boot_init() false 586 #else 587 #define ll_boot_init() true 588 #endif 589 590 /* Pull in stuff for the build system */ 591 #ifdef DO_DEPS_ONLY 592 # include <environment.h> 593 #endif 594 595 #endif /* __COMMON_H_ */ 596