1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# Used for compatibility with asm files copied from the kernel 23config ARM_ASM_UNIFIED 24 bool 25 default y 26 27# Used for compatibility with asm files copied from the kernel 28config THUMB2_KERNEL 29 bool 30 31# If set, the workarounds for these ARM errata are applied early during U-Boot 32# startup. Note that in general these options force the workarounds to be 33# applied; no CPU-type/version detection exists, unlike the similar options in 34# the Linux kernel. Do not set these options unless they apply! Also note that 35# the following can be machine specific errata. These do have ability to 36# provide rudimentary version and machine specific checks, but expect no 37# product checks: 38# CONFIG_ARM_ERRATA_430973 39# CONFIG_ARM_ERRATA_454179 40# CONFIG_ARM_ERRATA_621766 41# CONFIG_ARM_ERRATA_798870 42# CONFIG_ARM_ERRATA_801819 43config ARM_ERRATA_430973 44 bool 45 46config ARM_ERRATA_454179 47 bool 48 49config ARM_ERRATA_621766 50 bool 51 52config ARM_ERRATA_716044 53 bool 54 55config ARM_ERRATA_725233 56 bool 57 58config ARM_ERRATA_742230 59 bool 60 61config ARM_ERRATA_743622 62 bool 63 64config ARM_ERRATA_751472 65 bool 66 67config ARM_ERRATA_761320 68 bool 69 70config ARM_ERRATA_773022 71 bool 72 73config ARM_ERRATA_774769 74 bool 75 76config ARM_ERRATA_794072 77 bool 78 79config ARM_ERRATA_798870 80 bool 81 82config ARM_ERRATA_801819 83 bool 84 85config ARM_ERRATA_826974 86 bool 87 88config ARM_ERRATA_828024 89 bool 90 91config ARM_ERRATA_829520 92 bool 93 94config ARM_ERRATA_833069 95 bool 96 97config ARM_ERRATA_833471 98 bool 99 100config ARM_ERRATA_852421 101 bool 102 103config ARM_ERRATA_852423 104 bool 105 106config CPU_ARM720T 107 bool 108 select SYS_CACHE_SHIFT_5 109 110config CPU_ARM920T 111 bool 112 select SYS_CACHE_SHIFT_5 113 114config CPU_ARM926EJS 115 bool 116 select SYS_CACHE_SHIFT_5 117 118config CPU_ARM946ES 119 bool 120 select SYS_CACHE_SHIFT_5 121 122config CPU_ARM1136 123 bool 124 select SYS_CACHE_SHIFT_5 125 126config CPU_ARM1176 127 bool 128 select HAS_VBAR 129 select SYS_CACHE_SHIFT_5 130 131config CPU_V7 132 bool 133 select HAS_VBAR 134 select HAS_THUMB2 135 select SYS_CACHE_SHIFT_6 136 137config CPU_V7M 138 bool 139 select HAS_THUMB2 140 select THUMB2_KERNEL 141 select SYS_CACHE_SHIFT_5 142 143config CPU_PXA 144 bool 145 select SYS_CACHE_SHIFT_5 146 147config CPU_SA1100 148 bool 149 select SYS_CACHE_SHIFT_5 150 151config SYS_CPU 152 default "arm720t" if CPU_ARM720T 153 default "arm920t" if CPU_ARM920T 154 default "arm926ejs" if CPU_ARM926EJS 155 default "arm946es" if CPU_ARM946ES 156 default "arm1136" if CPU_ARM1136 157 default "arm1176" if CPU_ARM1176 158 default "armv7" if CPU_V7 159 default "armv7m" if CPU_V7M 160 default "pxa" if CPU_PXA 161 default "sa1100" if CPU_SA1100 162 default "armv8" if ARM64 163 164config SYS_ARM_ARCH 165 int 166 default 4 if CPU_ARM720T 167 default 4 if CPU_ARM920T 168 default 5 if CPU_ARM926EJS 169 default 5 if CPU_ARM946ES 170 default 6 if CPU_ARM1136 171 default 6 if CPU_ARM1176 172 default 7 if CPU_V7 173 default 7 if CPU_V7M 174 default 5 if CPU_PXA 175 default 4 if CPU_SA1100 176 default 8 if ARM64 177 178config SYS_CACHE_SHIFT_5 179 bool 180 181config SYS_CACHE_SHIFT_6 182 bool 183 184config SYS_CACHE_SHIFT_7 185 bool 186 187config SYS_CACHELINE_SIZE 188 int 189 default 128 if SYS_CACHE_SHIFT_7 190 default 64 if SYS_CACHE_SHIFT_6 191 default 32 if SYS_CACHE_SHIFT_5 192 193config ARM_SMCCC 194 bool "Support for ARM SMC Calling Convention (SMCCC)" 195 depends on CPU_V7 || ARM64 196 select ARM_PSCI_FW 197 help 198 Say Y here if you want to enable ARM SMC Calling Convention. 199 This should be enabled if U-Boot needs to communicate with system 200 firmware (for example, PSCI) according to SMCCC. 201 202config SEMIHOSTING 203 bool "support boot from semihosting" 204 help 205 In emulated environments, semihosting is a way for 206 the hosted environment to call out to the emulator to 207 retrieve files from the host machine. 208 209config SYS_THUMB_BUILD 210 bool "Build U-Boot using the Thumb instruction set" 211 depends on !ARM64 212 help 213 Use this flag to build U-Boot using the Thumb instruction set for 214 ARM architectures. Thumb instruction set provides better code 215 density. For ARM architectures that support Thumb2 this flag will 216 result in Thumb2 code generated by GCC. 217 218config SPL_SYS_THUMB_BUILD 219 bool "Build SPL using the Thumb instruction set" 220 default y if SYS_THUMB_BUILD 221 depends on !ARM64 222 help 223 Use this flag to build SPL using the Thumb instruction set for 224 ARM architectures. Thumb instruction set provides better code 225 density. For ARM architectures that support Thumb2 this flag will 226 result in Thumb2 code generated by GCC. 227 228config SYS_L2CACHE_OFF 229 bool "L2cache off" 230 help 231 If SoC does not support L2CACHE or one do not want to enable 232 L2CACHE, choose this option. 233 234config ENABLE_ARM_SOC_BOOT0_HOOK 235 bool "prepare BOOT0 header" 236 help 237 If the SoC's BOOT0 requires a header area filled with (magic) 238 values, then choose this option, and create a define called 239 ARM_SOC_BOOT0_HOOK which contains the required assembler 240 preprocessor code. 241 242config ARM_CORTEX_CPU_IS_UP 243 bool 244 default n 245 246config USE_ARCH_MEMCPY 247 bool "Use an assembly optimized implementation of memcpy" 248 default y 249 depends on !ARM64 250 help 251 Enable the generation of an optimized version of memcpy. 252 Such implementation may be faster under some conditions 253 but may increase the binary size. 254 255config SPL_USE_ARCH_MEMCPY 256 bool "Use an assembly optimized implementation of memcpy for SPL" 257 default y if USE_ARCH_MEMCPY 258 depends on !ARM64 259 help 260 Enable the generation of an optimized version of memcpy. 261 Such implementation may be faster under some conditions 262 but may increase the binary size. 263 264config USE_ARCH_MEMSET 265 bool "Use an assembly optimized implementation of memset" 266 default y 267 depends on !ARM64 268 help 269 Enable the generation of an optimized version of memset. 270 Such implementation may be faster under some conditions 271 but may increase the binary size. 272 273config SPL_USE_ARCH_MEMSET 274 bool "Use an assembly optimized implementation of memset for SPL" 275 default y if USE_ARCH_MEMSET 276 depends on !ARM64 277 help 278 Enable the generation of an optimized version of memset. 279 Such implementation may be faster under some conditions 280 but may increase the binary size. 281 282config ARM64_SUPPORT_AARCH32 283 bool "ARM64 system support AArch32 execution state" 284 default y if ARM64 && !TARGET_THUNDERX_88XX 285 help 286 This ARM64 system supports AArch32 execution state. 287 288choice 289 prompt "Target select" 290 default TARGET_HIKEY 291 292config ARCH_AT91 293 bool "Atmel AT91" 294 select SPL_BOARD_INIT if SPL 295 296config TARGET_EDB93XX 297 bool "Support edb93xx" 298 select CPU_ARM920T 299 300config TARGET_ASPENITE 301 bool "Support aspenite" 302 select CPU_ARM926EJS 303 304config TARGET_GPLUGD 305 bool "Support gplugd" 306 select CPU_ARM926EJS 307 308config ARCH_DAVINCI 309 bool "TI DaVinci" 310 select CPU_ARM926EJS 311 help 312 Support for TI's DaVinci platform. 313 314config KIRKWOOD 315 bool "Marvell Kirkwood" 316 select CPU_ARM926EJS 317 select BOARD_EARLY_INIT_F 318 select ARCH_MISC_INIT 319 320config ARCH_MVEBU 321 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 322 select OF_CONTROL 323 select OF_SEPARATE 324 select DM 325 select DM_ETH 326 select DM_SERIAL 327 select DM_SPI 328 select DM_SPI_FLASH 329 330config TARGET_DEVKIT3250 331 bool "Support devkit3250" 332 select CPU_ARM926EJS 333 select SUPPORT_SPL 334 335config TARGET_WORK_92105 336 bool "Support work_92105" 337 select CPU_ARM926EJS 338 select SUPPORT_SPL 339 340config TARGET_MX25PDK 341 bool "Support mx25pdk" 342 select BOARD_LATE_INIT 343 select CPU_ARM926EJS 344 select BOARD_EARLY_INIT_F 345 346config TARGET_ZMX25 347 bool "Support zmx25" 348 select BOARD_LATE_INIT 349 select CPU_ARM926EJS 350 351config TARGET_APF27 352 bool "Support apf27" 353 select CPU_ARM926EJS 354 select SUPPORT_SPL 355 356config TARGET_APX4DEVKIT 357 bool "Support apx4devkit" 358 select CPU_ARM926EJS 359 select SUPPORT_SPL 360 361config TARGET_XFI3 362 bool "Support xfi3" 363 select CPU_ARM926EJS 364 select SUPPORT_SPL 365 366config TARGET_M28EVK 367 bool "Support m28evk" 368 select CPU_ARM926EJS 369 select SUPPORT_SPL 370 371config TARGET_MX23EVK 372 bool "Support mx23evk" 373 select CPU_ARM926EJS 374 select SUPPORT_SPL 375 select BOARD_EARLY_INIT_F 376 377config TARGET_MX28EVK 378 bool "Support mx28evk" 379 select CPU_ARM926EJS 380 select SUPPORT_SPL 381 select BOARD_EARLY_INIT_F 382 383config TARGET_MX23_OLINUXINO 384 bool "Support mx23_olinuxino" 385 select CPU_ARM926EJS 386 select SUPPORT_SPL 387 select BOARD_EARLY_INIT_F 388 389config TARGET_BG0900 390 bool "Support bg0900" 391 select CPU_ARM926EJS 392 select SUPPORT_SPL 393 394config TARGET_SANSA_FUZE_PLUS 395 bool "Support sansa_fuze_plus" 396 select CPU_ARM926EJS 397 select SUPPORT_SPL 398 399config TARGET_SC_SPS_1 400 bool "Support sc_sps_1" 401 select CPU_ARM926EJS 402 select SUPPORT_SPL 403 404config ORION5X 405 bool "Marvell Orion" 406 select CPU_ARM926EJS 407 408config TARGET_SPEAR300 409 bool "Support spear300" 410 select CPU_ARM926EJS 411 select BOARD_EARLY_INIT_F 412 413config TARGET_SPEAR310 414 bool "Support spear310" 415 select CPU_ARM926EJS 416 select BOARD_EARLY_INIT_F 417 418config TARGET_SPEAR320 419 bool "Support spear320" 420 select CPU_ARM926EJS 421 select BOARD_EARLY_INIT_F 422 423config TARGET_SPEAR600 424 bool "Support spear600" 425 select CPU_ARM926EJS 426 select BOARD_EARLY_INIT_F 427 428config TARGET_STV0991 429 bool "Support stv0991" 430 select CPU_V7 431 select DM 432 select DM_SERIAL 433 select DM_SPI 434 select DM_SPI_FLASH 435 select SPI_FLASH 436 437config TARGET_X600 438 bool "Support x600" 439 select BOARD_LATE_INIT 440 select CPU_ARM926EJS 441 select SUPPORT_SPL 442 443config TARGET_IMX31_PHYCORE 444 bool "Support imx31_phycore_eet" 445 select CPU_ARM1136 446 select BOARD_EARLY_INIT_F 447 448config TARGET_IMX31_PHYCORE_EET 449 bool "Support imx31_phycore_eet" 450 select BOARD_LATE_INIT 451 select CPU_ARM1136 452 select BOARD_EARLY_INIT_F 453 454config TARGET_MX31ADS 455 bool "Support mx31ads" 456 select CPU_ARM1136 457 select BOARD_EARLY_INIT_F 458 459config TARGET_MX31PDK 460 bool "Support mx31pdk" 461 select BOARD_LATE_INIT 462 select CPU_ARM1136 463 select SUPPORT_SPL 464 select BOARD_EARLY_INIT_F 465 466config TARGET_WOODBURN 467 bool "Support woodburn" 468 select CPU_ARM1136 469 470config TARGET_WOODBURN_SD 471 bool "Support woodburn_sd" 472 select CPU_ARM1136 473 select SUPPORT_SPL 474 475config TARGET_FLEA3 476 bool "Support flea3" 477 select CPU_ARM1136 478 479config TARGET_MX35PDK 480 bool "Support mx35pdk" 481 select BOARD_LATE_INIT 482 select CPU_ARM1136 483 484config ARCH_BCM283X 485 bool "Broadcom BCM283X family" 486 select DM 487 select DM_SERIAL 488 select DM_GPIO 489 select OF_CONTROL 490 imply FAT_WRITE 491 492config TARGET_VEXPRESS_CA15_TC2 493 bool "Support vexpress_ca15_tc2" 494 select CPU_V7 495 select CPU_V7_HAS_NONSEC 496 select CPU_V7_HAS_VIRT 497 498config TARGET_VEXPRESS_CA5X2 499 bool "Support vexpress_ca5x2" 500 select CPU_V7 501 502config TARGET_VEXPRESS_CA9X4 503 bool "Support vexpress_ca9x4" 504 select CPU_V7 505 506config TARGET_BCM23550_W1D 507 bool "Support bcm23550_w1d" 508 select CPU_V7 509 imply CRC32_VERIFY 510 imply FAT_WRITE 511 512config TARGET_BCM28155_AP 513 bool "Support bcm28155_ap" 514 select CPU_V7 515 imply CRC32_VERIFY 516 imply FAT_WRITE 517 518config TARGET_BCMCYGNUS 519 bool "Support bcmcygnus" 520 select CPU_V7 521 imply CRC32_VERIFY 522 imply CMD_HASH 523 imply FAT_WRITE 524 imply HASH_VERIFY 525 526config TARGET_BCMNSP 527 bool "Support bcmnsp" 528 select CPU_V7 529 530config TARGET_BCMNS2 531 bool "Support Broadcom Northstar2" 532 select ARM64 533 help 534 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 535 ARMv8 Cortex-A57 processors targeting a broad range of networking 536 applications 537 538config ARCH_EXYNOS 539 bool "Samsung EXYNOS" 540 select DM 541 select DM_I2C 542 select DM_SPI_FLASH 543 select DM_SERIAL 544 select DM_SPI 545 select DM_GPIO 546 select DM_KEYBOARD 547 imply FAT_WRITE 548 549config ARCH_S5PC1XX 550 bool "Samsung S5PC1XX" 551 select CPU_V7 552 select DM 553 select DM_SERIAL 554 select DM_GPIO 555 select DM_I2C 556 557config ARCH_HIGHBANK 558 bool "Calxeda Highbank" 559 select CPU_V7 560 561config ARCH_INTEGRATOR 562 bool "ARM Ltd. Integrator family" 563 select DM 564 select DM_SERIAL 565 566config ARCH_KEYSTONE 567 bool "TI Keystone" 568 select CPU_V7 569 select SUPPORT_SPL 570 select SYS_THUMB_BUILD 571 select CMD_POWEROFF 572 imply FIT 573 574config ARCH_OMAP2PLUS 575 bool "TI OMAP2+" 576 select CPU_V7 577 select SPL_BOARD_INIT if SPL 578 select SUPPORT_SPL 579 imply FIT 580 581config ARCH_MESON 582 bool "Amlogic Meson" 583 help 584 Support for the Meson SoC family developed by Amlogic Inc., 585 targeted at media players and tablet computers. We currently 586 support the S905 (GXBaby) 64-bit SoC. 587 588config ARCH_MX7ULP 589 bool "NXP MX7ULP" 590 select CPU_V7 591 select ROM_UNIFIED_SECTIONS 592 593config ARCH_MX7 594 bool "Freescale MX7" 595 select CPU_V7 596 select SYS_FSL_HAS_SEC if SECURE_BOOT 597 select SYS_FSL_SEC_COMPAT_4 598 select SYS_FSL_SEC_LE 599 select BOARD_EARLY_INIT_F 600 select ARCH_MISC_INIT 601 602config ARCH_MX6 603 bool "Freescale MX6" 604 select CPU_V7 605 select SYS_FSL_HAS_SEC if SECURE_BOOT 606 select SYS_FSL_SEC_COMPAT_4 607 select SYS_FSL_SEC_LE 608 select SYS_THUMB_BUILD if SPL 609 610config ARCH_MX5 611 bool "Freescale MX5" 612 select CPU_V7 613 select BOARD_EARLY_INIT_F 614 615config ARCH_RMOBILE 616 bool "Renesas ARM SoCs" 617 select DM 618 select DM_SERIAL 619 select BOARD_EARLY_INIT_F 620 imply FAT_WRITE 621 imply SYS_THUMB_BUILD 622 623config TARGET_S32V234EVB 624 bool "Support s32v234evb" 625 select ARM64 626 select SYS_FSL_ERRATUM_ESDHC111 627 628config ARCH_SNAPDRAGON 629 bool "Qualcomm Snapdragon SoCs" 630 select ARM64 631 select DM 632 select DM_GPIO 633 select DM_SERIAL 634 select SPMI 635 select OF_CONTROL 636 select OF_SEPARATE 637 638config ARCH_SOCFPGA 639 bool "Altera SOCFPGA family" 640 select CPU_V7 641 select SUPPORT_SPL 642 select OF_CONTROL 643 select SPL_OF_CONTROL 644 select DM 645 select DM_SPI_FLASH 646 select DM_SPI 647 select ENABLE_ARM_SOC_BOOT0_HOOK 648 select ARCH_EARLY_INIT_R 649 select ARCH_MISC_INIT 650 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 651 select SYS_THUMB_BUILD 652 imply CRC32_VERIFY 653 imply FAT_WRITE 654 655config ARCH_SUNXI 656 bool "Support sunxi (Allwinner) SoCs" 657 select CMD_GPIO 658 select CMD_MMC if MMC 659 select CMD_USB if DISTRO_DEFAULTS 660 select DM 661 select DM_ETH 662 select DM_GPIO 663 select DM_KEYBOARD 664 select DM_SERIAL 665 select DM_USB if DISTRO_DEFAULTS 666 select OF_BOARD_SETUP 667 select OF_CONTROL 668 select OF_SEPARATE 669 select SPL_STACK_R if SPL 670 select SPL_SYS_MALLOC_SIMPLE if SPL 671 select SYS_NS16550 672 select SPL_SYS_THUMB_BUILD if !ARM64 673 select USB if DISTRO_DEFAULTS 674 select USB_STORAGE if DISTRO_DEFAULTS 675 select USB_KEYBOARD if DISTRO_DEFAULTS 676 select USE_TINY_PRINTF 677 imply FAT_WRITE 678 imply PRE_CONSOLE_BUFFER 679 imply SPL_GPIO_SUPPORT 680 imply SPL_LIBCOMMON_SUPPORT 681 imply SPL_LIBDISK_SUPPORT 682 imply SPL_LIBGENERIC_SUPPORT 683 imply SPL_MMC_SUPPORT if MMC 684 imply SPL_POWER_SUPPORT 685 imply SPL_SERIAL_SUPPORT 686 687config TARGET_TS4600 688 bool "Support TS4600" 689 select CPU_ARM926EJS 690 select SUPPORT_SPL 691 692config ARCH_VF610 693 bool "Freescale Vybrid" 694 select CPU_V7 695 select SYS_FSL_ERRATUM_ESDHC111 696 697config ARCH_ZYNQ 698 bool "Xilinx Zynq Platform" 699 select BOARD_LATE_INIT 700 select CPU_V7 701 select SUPPORT_SPL 702 select OF_CONTROL 703 select SPL_BOARD_INIT if SPL 704 select SPL_OF_CONTROL if SPL 705 select DM 706 select DM_ETH 707 select DM_GPIO 708 select SPL_DM if SPL 709 select DM_MMC 710 select DM_MMC_OPS 711 select DM_SPI 712 select DM_SERIAL 713 select DM_SPI_FLASH 714 select SPL_SEPARATE_BSS if SPL 715 select DM_USB if USB 716 select BLK 717 select CLK 718 select SPL_CLK 719 select CLK_ZYNQ 720 imply CMD_CLK 721 imply FAT_WRITE 722 723config ARCH_ZYNQMP 724 bool "Support Xilinx ZynqMP Platform" 725 select ARM64 726 select BOARD_LATE_INIT 727 select DM 728 select OF_CONTROL 729 select DM_SERIAL 730 select SUPPORT_SPL 731 select CLK 732 select SPL_BOARD_INIT if SPL 733 select SPL_CLK 734 select DM_USB if USB 735 imply FAT_WRITE 736 737config TEGRA 738 bool "NVIDIA Tegra" 739 imply FAT_WRITE 740 741config TARGET_VEXPRESS64_AEMV8A 742 bool "Support vexpress_aemv8a" 743 select ARM64 744 745config TARGET_VEXPRESS64_BASE_FVP 746 bool "Support Versatile Express ARMv8a FVP BASE model" 747 select ARM64 748 select SEMIHOSTING 749 750config TARGET_VEXPRESS64_BASE_FVP_DRAM 751 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 752 select ARM64 753 help 754 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 755 the default config to allow the user to load the images directly into 756 DRAM using model parameters rather than by using semi-hosting to load 757 the files from the host filesystem. 758 759config TARGET_VEXPRESS64_JUNO 760 bool "Support Versatile Express Juno Development Platform" 761 select ARM64 762 763config TARGET_LS2080A_EMU 764 bool "Support ls2080a_emu" 765 select ARCH_LS2080A 766 select ARM64 767 select ARMV8_MULTIENTRY 768 select ARCH_MISC_INIT 769 help 770 Support for Freescale LS2080A_EMU platform 771 The LS2080A Development System (EMULATOR) is a pre silicon 772 development platform that supports the QorIQ LS2080A 773 Layerscape Architecture processor. 774 775config TARGET_LS2080A_SIMU 776 bool "Support ls2080a_simu" 777 select ARCH_LS2080A 778 select ARM64 779 select ARMV8_MULTIENTRY 780 select ARCH_MISC_INIT 781 help 782 Support for Freescale LS2080A_SIMU platform 783 The LS2080A Development System (QDS) is a pre silicon 784 development platform that supports the QorIQ LS2080A 785 Layerscape Architecture processor. 786 787config TARGET_LS2080AQDS 788 bool "Support ls2080aqds" 789 select ARCH_LS2080A 790 select ARM64 791 select ARMV8_MULTIENTRY 792 select BOARD_LATE_INIT 793 select SUPPORT_SPL 794 select ARCH_MISC_INIT 795 help 796 Support for Freescale LS2080AQDS platform 797 The LS2080A Development System (QDS) is a high-performance 798 development platform that supports the QorIQ LS2080A 799 Layerscape Architecture processor. 800 801config TARGET_LS2080ARDB 802 bool "Support ls2080ardb" 803 select ARCH_LS2080A 804 select ARM64 805 select ARMV8_MULTIENTRY 806 select BOARD_LATE_INIT 807 select SUPPORT_SPL 808 select ARCH_MISC_INIT 809 help 810 Support for Freescale LS2080ARDB platform. 811 The LS2080A Reference design board (RDB) is a high-performance 812 development platform that supports the QorIQ LS2080A 813 Layerscape Architecture processor. 814 815config TARGET_LS2081ARDB 816 bool "Support ls2081ardb" 817 select ARCH_LS2080A 818 select ARM64 819 select ARMV8_MULTIENTRY 820 select BOARD_LATE_INIT 821 select SUPPORT_SPL 822 select ARCH_MISC_INIT 823 help 824 Support for Freescale LS2081ARDB platform. 825 The LS2081A Reference design board (RDB) is a high-performance 826 development platform that supports the QorIQ LS2081A/LS2041A 827 Layerscape Architecture processor. 828 829config TARGET_HIKEY 830 bool "Support HiKey 96boards Consumer Edition Platform" 831 select ARM64 832 select DM 833 select DM_GPIO 834 select DM_SERIAL 835 select OF_CONTROL 836 help 837 Support for HiKey 96boards platform. It features a HI6220 838 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 839 840config TARGET_LS1012AQDS 841 bool "Support ls1012aqds" 842 select ARCH_LS1012A 843 select ARM64 844 select BOARD_LATE_INIT 845 help 846 Support for Freescale LS1012AQDS platform. 847 The LS1012A Development System (QDS) is a high-performance 848 development platform that supports the QorIQ LS1012A 849 Layerscape Architecture processor. 850 851config TARGET_LS1012ARDB 852 bool "Support ls1012ardb" 853 select ARCH_LS1012A 854 select ARM64 855 select BOARD_LATE_INIT 856 help 857 Support for Freescale LS1012ARDB platform. 858 The LS1012A Reference design board (RDB) is a high-performance 859 development platform that supports the QorIQ LS1012A 860 Layerscape Architecture processor. 861 862config TARGET_LS1012AFRDM 863 bool "Support ls1012afrdm" 864 select ARCH_LS1012A 865 select ARM64 866 help 867 Support for Freescale LS1012AFRDM platform. 868 The LS1012A Freedom board (FRDM) is a high-performance 869 development platform that supports the QorIQ LS1012A 870 Layerscape Architecture processor. 871 872config TARGET_LS1021AQDS 873 bool "Support ls1021aqds" 874 select BOARD_LATE_INIT 875 select CPU_V7 876 select CPU_V7_HAS_NONSEC 877 select CPU_V7_HAS_VIRT 878 select SUPPORT_SPL 879 select ARCH_LS1021A 880 select ARCH_SUPPORT_PSCI 881 select LS1_DEEP_SLEEP 882 select SYS_FSL_DDR 883 select BOARD_EARLY_INIT_F 884 885config TARGET_LS1021ATWR 886 bool "Support ls1021atwr" 887 select BOARD_LATE_INIT 888 select CPU_V7 889 select CPU_V7_HAS_NONSEC 890 select CPU_V7_HAS_VIRT 891 select SUPPORT_SPL 892 select ARCH_LS1021A 893 select ARCH_SUPPORT_PSCI 894 select LS1_DEEP_SLEEP 895 select BOARD_EARLY_INIT_F 896 897config TARGET_LS1021AIOT 898 bool "Support ls1021aiot" 899 select BOARD_LATE_INIT 900 select CPU_V7 901 select CPU_V7_HAS_NONSEC 902 select CPU_V7_HAS_VIRT 903 select SUPPORT_SPL 904 select ARCH_LS1021A 905 select ARCH_SUPPORT_PSCI 906 help 907 Support for Freescale LS1021AIOT platform. 908 The LS1021A Freescale board (IOT) is a high-performance 909 development platform that supports the QorIQ LS1021A 910 Layerscape Architecture processor. 911 912config TARGET_LS1043AQDS 913 bool "Support ls1043aqds" 914 select ARCH_LS1043A 915 select ARM64 916 select ARMV8_MULTIENTRY 917 select BOARD_LATE_INIT 918 select SUPPORT_SPL 919 select BOARD_EARLY_INIT_F 920 help 921 Support for Freescale LS1043AQDS platform. 922 923config TARGET_LS1043ARDB 924 bool "Support ls1043ardb" 925 select ARCH_LS1043A 926 select ARM64 927 select ARMV8_MULTIENTRY 928 select BOARD_LATE_INIT 929 select SUPPORT_SPL 930 select BOARD_EARLY_INIT_F 931 help 932 Support for Freescale LS1043ARDB platform. 933 934config TARGET_LS1046AQDS 935 bool "Support ls1046aqds" 936 select ARCH_LS1046A 937 select ARM64 938 select ARMV8_MULTIENTRY 939 select BOARD_LATE_INIT 940 select SUPPORT_SPL 941 select DM_SPI_FLASH if DM_SPI 942 select BOARD_EARLY_INIT_F 943 help 944 Support for Freescale LS1046AQDS platform. 945 The LS1046A Development System (QDS) is a high-performance 946 development platform that supports the QorIQ LS1046A 947 Layerscape Architecture processor. 948 949config TARGET_LS1046ARDB 950 bool "Support ls1046ardb" 951 select ARCH_LS1046A 952 select ARM64 953 select ARMV8_MULTIENTRY 954 select BOARD_LATE_INIT 955 select SUPPORT_SPL 956 select DM_SPI_FLASH if DM_SPI 957 select POWER_MC34VR500 958 select BOARD_EARLY_INIT_F 959 help 960 Support for Freescale LS1046ARDB platform. 961 The LS1046A Reference Design Board (RDB) is a high-performance 962 development platform that supports the QorIQ LS1046A 963 Layerscape Architecture processor. 964 965config TARGET_H2200 966 bool "Support h2200" 967 select CPU_PXA 968 969config TARGET_ZIPITZ2 970 bool "Support zipitz2" 971 select CPU_PXA 972 973config TARGET_COLIBRI_PXA270 974 bool "Support colibri_pxa270" 975 select CPU_PXA 976 977config ARCH_UNIPHIER 978 bool "Socionext UniPhier SoCs" 979 select BOARD_LATE_INIT 980 select CLK_UNIPHIER 981 select DM 982 select DM_GPIO 983 select DM_I2C 984 select DM_MMC 985 select DM_RESET 986 select DM_SERIAL 987 select DM_USB 988 select OF_CONTROL 989 select OF_LIBFDT 990 select PINCTRL 991 select SPL_BOARD_INIT if SPL 992 select SPL_DM if SPL 993 select SPL_LIBCOMMON_SUPPORT if SPL 994 select SPL_LIBGENERIC_SUPPORT if SPL 995 select SPL_OF_CONTROL if SPL 996 select SPL_PINCTRL if SPL 997 select SUPPORT_SPL 998 imply FAT_WRITE 999 help 1000 Support for UniPhier SoC family developed by Socionext Inc. 1001 (formerly, System LSI Business Division of Panasonic Corporation) 1002 1003config STM32 1004 bool "Support STM32" 1005 select CPU_V7M 1006 select DM 1007 select DM_SERIAL 1008 select SYS_THUMB_BUILD 1009 1010config ARCH_STI 1011 bool "Support STMicrolectronics SoCs" 1012 select CPU_V7 1013 select DM 1014 select DM_SERIAL 1015 select BLK 1016 select DM_MMC 1017 select DM_RESET 1018 help 1019 Support for STMicroelectronics STiH407/10 SoC family. 1020 This SoC is used on Linaro 96Board STiH410-B2260 1021 1022config ARCH_ROCKCHIP 1023 bool "Support Rockchip SoCs" 1024 select OF_CONTROL 1025 select BLK 1026 select DM 1027 select SPL_DM if SPL 1028 select SYS_MALLOC_F 1029 select SYS_THUMB_BUILD if !ARM64 1030 select SPL_SYS_MALLOC_SIMPLE if SPL 1031 select DM_GPIO 1032 select DM_I2C 1033 select DM_MMC 1034 select DM_MMC_OPS 1035 select DM_SERIAL 1036 select DM_SPI 1037 select DM_SPI_FLASH 1038 select DM_USB if USB 1039 select DM_PWM 1040 select DM_REGULATOR 1041 imply FAT_WRITE 1042 1043config TARGET_THUNDERX_88XX 1044 bool "Support ThunderX 88xx" 1045 select ARM64 1046 select OF_CONTROL 1047 select SYS_CACHE_SHIFT_7 1048 1049config ARCH_ASPEED 1050 bool "Support Aspeed SoCs" 1051 select OF_CONTROL 1052 select DM 1053 1054endchoice 1055 1056source "arch/arm/mach-aspeed/Kconfig" 1057 1058source "arch/arm/mach-at91/Kconfig" 1059 1060source "arch/arm/mach-bcm283x/Kconfig" 1061 1062source "arch/arm/mach-davinci/Kconfig" 1063 1064source "arch/arm/mach-exynos/Kconfig" 1065 1066source "arch/arm/mach-highbank/Kconfig" 1067 1068source "arch/arm/mach-integrator/Kconfig" 1069 1070source "arch/arm/mach-keystone/Kconfig" 1071 1072source "arch/arm/mach-kirkwood/Kconfig" 1073 1074source "arch/arm/mach-mvebu/Kconfig" 1075 1076source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1077 1078source "arch/arm/cpu/armv7/mx7ulp/Kconfig" 1079 1080source "arch/arm/cpu/armv7/mx7/Kconfig" 1081 1082source "arch/arm/cpu/armv7/mx6/Kconfig" 1083 1084source "arch/arm/cpu/armv7/mx5/Kconfig" 1085 1086source "arch/arm/mach-omap2/Kconfig" 1087 1088source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1089 1090source "arch/arm/mach-orion5x/Kconfig" 1091 1092source "arch/arm/mach-rmobile/Kconfig" 1093 1094source "arch/arm/mach-meson/Kconfig" 1095 1096source "arch/arm/mach-rockchip/Kconfig" 1097 1098source "arch/arm/mach-s5pc1xx/Kconfig" 1099 1100source "arch/arm/mach-snapdragon/Kconfig" 1101 1102source "arch/arm/mach-socfpga/Kconfig" 1103 1104source "arch/arm/mach-sti/Kconfig" 1105 1106source "arch/arm/mach-stm32/Kconfig" 1107 1108source "arch/arm/mach-sunxi/Kconfig" 1109 1110source "arch/arm/mach-tegra/Kconfig" 1111 1112source "arch/arm/mach-uniphier/Kconfig" 1113 1114source "arch/arm/cpu/armv7/vf610/Kconfig" 1115 1116source "arch/arm/mach-zynq/Kconfig" 1117 1118source "arch/arm/cpu/armv7/Kconfig" 1119 1120source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1121 1122source "arch/arm/cpu/armv8/Kconfig" 1123 1124source "arch/arm/imx-common/Kconfig" 1125 1126source "board/aries/m28evk/Kconfig" 1127source "board/bosch/shc/Kconfig" 1128source "board/CarMediaLab/flea3/Kconfig" 1129source "board/Marvell/aspenite/Kconfig" 1130source "board/Marvell/gplugd/Kconfig" 1131source "board/armadeus/apf27/Kconfig" 1132source "board/armltd/vexpress/Kconfig" 1133source "board/armltd/vexpress64/Kconfig" 1134source "board/bluegiga/apx4devkit/Kconfig" 1135source "board/broadcom/bcm23550_w1d/Kconfig" 1136source "board/broadcom/bcm28155_ap/Kconfig" 1137source "board/broadcom/bcmcygnus/Kconfig" 1138source "board/broadcom/bcmnsp/Kconfig" 1139source "board/broadcom/bcmns2/Kconfig" 1140source "board/cavium/thunderx/Kconfig" 1141source "board/cirrus/edb93xx/Kconfig" 1142source "board/creative/xfi3/Kconfig" 1143source "board/freescale/ls2080a/Kconfig" 1144source "board/freescale/ls2080aqds/Kconfig" 1145source "board/freescale/ls2080ardb/Kconfig" 1146source "board/freescale/ls1021aqds/Kconfig" 1147source "board/freescale/ls1043aqds/Kconfig" 1148source "board/freescale/ls1021atwr/Kconfig" 1149source "board/freescale/ls1021aiot/Kconfig" 1150source "board/freescale/ls1046aqds/Kconfig" 1151source "board/freescale/ls1043ardb/Kconfig" 1152source "board/freescale/ls1046ardb/Kconfig" 1153source "board/freescale/ls1012aqds/Kconfig" 1154source "board/freescale/ls1012ardb/Kconfig" 1155source "board/freescale/ls1012afrdm/Kconfig" 1156source "board/freescale/mx23evk/Kconfig" 1157source "board/freescale/mx25pdk/Kconfig" 1158source "board/freescale/mx28evk/Kconfig" 1159source "board/freescale/mx31ads/Kconfig" 1160source "board/freescale/mx31pdk/Kconfig" 1161source "board/freescale/mx35pdk/Kconfig" 1162source "board/freescale/s32v234evb/Kconfig" 1163source "board/gdsys/a38x/Kconfig" 1164source "board/grinn/chiliboard/Kconfig" 1165source "board/gumstix/pepper/Kconfig" 1166source "board/h2200/Kconfig" 1167source "board/hisilicon/hikey/Kconfig" 1168source "board/imx31_phycore/Kconfig" 1169source "board/isee/igep003x/Kconfig" 1170source "board/olimex/mx23_olinuxino/Kconfig" 1171source "board/phytec/pcm051/Kconfig" 1172source "board/ppcag/bg0900/Kconfig" 1173source "board/sandisk/sansa_fuze_plus/Kconfig" 1174source "board/schulercontrol/sc_sps_1/Kconfig" 1175source "board/silica/pengwyn/Kconfig" 1176source "board/spear/spear300/Kconfig" 1177source "board/spear/spear310/Kconfig" 1178source "board/spear/spear320/Kconfig" 1179source "board/spear/spear600/Kconfig" 1180source "board/spear/x600/Kconfig" 1181source "board/st/stv0991/Kconfig" 1182source "board/syteco/zmx25/Kconfig" 1183source "board/tcl/sl50/Kconfig" 1184source "board/birdland/bav335x/Kconfig" 1185source "board/timll/devkit3250/Kconfig" 1186source "board/toradex/colibri_pxa270/Kconfig" 1187source "board/technologic/ts4600/Kconfig" 1188source "board/vscom/baltos/Kconfig" 1189source "board/woodburn/Kconfig" 1190source "board/work-microwave/work_92105/Kconfig" 1191source "board/zipitz2/Kconfig" 1192 1193source "arch/arm/Kconfig.debug" 1194 1195endmenu 1196