xref: /openbmc/u-boot/drivers/net/Kconfig (revision 17cb4b8f)
1config DM_ETH
2	bool "Enable Driver Model for Ethernet drivers"
3	depends on DM
4	help
5	  Enable driver model for Ethernet.
6
7	  The eth_*() interface will be implemented by the UC_ETH class
8	  This is currently implemented in net/eth.c
9	  Look in include/net.h for details.
10
11config PHYLIB
12	bool "Ethernet PHY (physical media interface) support"
13	help
14	  Enable Ethernet PHY (physical media interface) support.
15
16config RTL8211X_PHY_FORCE_MASTER
17	bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
18	depends on PHYLIB
19	help
20	  Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
21	  This can work around link stability and data corruption issues on gigabit
22	  links which can occur in slave mode on certain PHYs, e.g. on the
23	  RTL8211C(L).
24
25	  Please note that two directly connected devices (i.e. via crossover cable)
26	  will not be able to establish a link between each other if they both force
27	  master mode. Multiple devices forcing master mode when connected by a
28	  network switch do not pose a problem as the switch configures its affected
29	  ports into slave mode.
30
31	  This option only affects gigabit links. If you must establish a direct
32	  connection between two devices which both force master mode, try forcing
33	  the link speed to 100MBit/s.
34
35	  If unsure, say N.
36
37menuconfig NETDEVICES
38	bool "Network device support"
39	depends on NET
40	default y if DM_ETH
41	help
42	  You must select Y to enable any network device support
43	  Generally if you have any networking support this is a given
44
45	  If unsure, say Y
46
47if NETDEVICES
48
49config AG7XXX
50	bool "Atheros AG7xxx Ethernet MAC support"
51	depends on DM_ETH && ARCH_ATH79
52	select PHYLIB
53	help
54	  This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
55	  present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
56
57
58config ALTERA_TSE
59	bool "Altera Triple-Speed Ethernet MAC support"
60	depends on DM_ETH
61	select PHYLIB
62	help
63	  This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
64	  Please find details on the "Triple-Speed Ethernet MegaCore Function
65	  Resource Center" of Altera.
66
67config E1000
68	bool "Intel PRO/1000 Gigabit Ethernet support"
69	help
70	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
71	  adapters.  For more information on how to identify your adapter, go
72	  to the Adapter & Driver ID Guide at:
73
74	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
75
76config E1000_SPI_GENERIC
77	bool "Allow access to the Intel 8257x SPI bus"
78	depends on E1000
79	help
80	  Allow generic access to the SPI bus on the Intel 8257x, for
81	  example with the "sspi" command.
82
83config E1000_SPI
84	bool "Enable SPI bus utility code"
85	depends on E1000
86	help
87	  Utility code for direct access to the SPI bus on Intel 8257x.
88	  This does not do anything useful unless you set at least one
89	  of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
90
91config CMD_E1000
92	bool "Enable the e1000 command"
93	depends on E1000
94	help
95	  This enables the 'e1000' management command for E1000 devices. When
96	  used on devices with SPI support you can reprogram the EEPROM from
97	  U-Boot.
98
99config ETH_SANDBOX
100	depends on DM_ETH && SANDBOX
101	default y
102	bool "Sandbox: Mocked Ethernet driver"
103	help
104	  This driver simply responds with fake ARP replies and ping
105	  replies that are used to verify network stack functionality
106
107	  This driver is particularly useful in the test/dm/eth.c tests
108
109config ETH_SANDBOX_RAW
110	depends on DM_ETH && SANDBOX
111	default y
112	bool "Sandbox: Bridge to Linux Raw Sockets"
113	help
114	  This driver is a bridge from the bottom of the network stack
115	  in U-Boot to the RAW AF_PACKET API in Linux. This allows real
116	  network traffic to be tested from within sandbox. See
117	  board/sandbox/README.sandbox for more details.
118
119config ETH_DESIGNWARE
120	bool "Synopsys Designware Ethernet MAC"
121	select PHYLIB
122	help
123	  This MAC is present in SoCs from various vendors. It supports
124	  100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
125	  provide the PHY (physical media interface).
126
127config MVPP2
128	bool "Marvell Armada 375 network interface support"
129	depends on ARMADA_375
130	select PHYLIB
131	help
132	  This driver supports the network interface units in the
133	  Marvell ARMADA 375 SoC.
134
135config PCH_GBE
136	bool "Intel Platform Controller Hub EG20T GMAC driver"
137	depends on DM_ETH && DM_PCI
138	select PHYLIB
139	help
140	  This MAC is present in Intel Platform Controller Hub EG20T. It
141	  supports 10/100/1000 Mbps operation.
142
143config RTL8139
144	bool "Realtek 8139 series Ethernet controller driver"
145	help
146	  This driver supports Realtek 8139 series fast ethernet family of
147	  PCI chipsets/adapters.
148
149config RTL8169
150	bool "Realtek 8169 series Ethernet controller driver"
151	help
152	  This driver supports Realtek 8169 series gigabit ethernet family of
153	  PCI/PCIe chipsets/adapters.
154
155config XILINX_AXIEMAC
156	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
157	select PHYLIB
158	select MII
159	bool "Xilinx AXI Ethernet"
160	help
161	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
162
163config XILINX_EMACLITE
164	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
165	select PHYLIB
166	select MII
167	bool "Xilinx Ethernetlite"
168	help
169	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
170
171config ZYNQ_GEM
172	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
173	select PHYLIB
174	bool "Xilinx Ethernet GEM"
175	help
176	  This MAC is present in Xilinx Zynq and ZynqMP SoCs.
177
178config PIC32_ETH
179	bool "Microchip PIC32 Ethernet Support"
180	depends on DM_ETH && MACH_PIC32
181	select PHYLIB
182	help
183	  This driver implements 10/100 Mbps Ethernet and MAC layer for
184	  Microchip PIC32 microcontrollers.
185
186endif # NETDEVICES
187