1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# Used for compatibility with asm files copied from the kernel 23config ARM_ASM_UNIFIED 24 bool 25 default y 26 27# Used for compatibility with asm files copied from the kernel 28config THUMB2_KERNEL 29 bool 30 31# If set, the workarounds for these ARM errata are applied early during U-Boot 32# startup. Note that in general these options force the workarounds to be 33# applied; no CPU-type/version detection exists, unlike the similar options in 34# the Linux kernel. Do not set these options unless they apply! Also note that 35# the following can be machine specific errata. These do have ability to 36# provide rudimentary version and machine specific checks, but expect no 37# product checks: 38# CONFIG_ARM_ERRATA_430973 39# CONFIG_ARM_ERRATA_454179 40# CONFIG_ARM_ERRATA_621766 41# CONFIG_ARM_ERRATA_798870 42# CONFIG_ARM_ERRATA_801819 43config ARM_ERRATA_430973 44 bool 45 46config ARM_ERRATA_454179 47 bool 48 49config ARM_ERRATA_621766 50 bool 51 52config ARM_ERRATA_716044 53 bool 54 55config ARM_ERRATA_725233 56 bool 57 58config ARM_ERRATA_742230 59 bool 60 61config ARM_ERRATA_743622 62 bool 63 64config ARM_ERRATA_751472 65 bool 66 67config ARM_ERRATA_761320 68 bool 69 70config ARM_ERRATA_773022 71 bool 72 73config ARM_ERRATA_774769 74 bool 75 76config ARM_ERRATA_794072 77 bool 78 79config ARM_ERRATA_798870 80 bool 81 82config ARM_ERRATA_801819 83 bool 84 85config ARM_ERRATA_826974 86 bool 87 88config ARM_ERRATA_828024 89 bool 90 91config ARM_ERRATA_829520 92 bool 93 94config ARM_ERRATA_833069 95 bool 96 97config ARM_ERRATA_833471 98 bool 99 100config ARM_ERRATA_852421 101 bool 102 103config ARM_ERRATA_852423 104 bool 105 106config CPU_ARM720T 107 bool 108 select SYS_CACHE_SHIFT_5 109 110config CPU_ARM920T 111 bool 112 select SYS_CACHE_SHIFT_5 113 114config CPU_ARM926EJS 115 bool 116 select SYS_CACHE_SHIFT_5 117 118config CPU_ARM946ES 119 bool 120 select SYS_CACHE_SHIFT_5 121 122config CPU_ARM1136 123 bool 124 select SYS_CACHE_SHIFT_5 125 126config CPU_ARM1176 127 bool 128 select HAS_VBAR 129 select SYS_CACHE_SHIFT_5 130 131config CPU_V7 132 bool 133 select HAS_VBAR 134 select HAS_THUMB2 135 select SYS_CACHE_SHIFT_6 136 137config CPU_V7M 138 bool 139 select HAS_THUMB2 140 select THUMB2_KERNEL 141 select SYS_CACHE_SHIFT_5 142 143config CPU_PXA 144 bool 145 select SYS_CACHE_SHIFT_5 146 147config CPU_SA1100 148 bool 149 select SYS_CACHE_SHIFT_5 150 151config SYS_CPU 152 default "arm720t" if CPU_ARM720T 153 default "arm920t" if CPU_ARM920T 154 default "arm926ejs" if CPU_ARM926EJS 155 default "arm946es" if CPU_ARM946ES 156 default "arm1136" if CPU_ARM1136 157 default "arm1176" if CPU_ARM1176 158 default "armv7" if CPU_V7 159 default "armv7m" if CPU_V7M 160 default "pxa" if CPU_PXA 161 default "sa1100" if CPU_SA1100 162 default "armv8" if ARM64 163 164config SYS_ARM_ARCH 165 int 166 default 4 if CPU_ARM720T 167 default 4 if CPU_ARM920T 168 default 5 if CPU_ARM926EJS 169 default 5 if CPU_ARM946ES 170 default 6 if CPU_ARM1136 171 default 6 if CPU_ARM1176 172 default 7 if CPU_V7 173 default 7 if CPU_V7M 174 default 5 if CPU_PXA 175 default 4 if CPU_SA1100 176 default 8 if ARM64 177 178config SYS_CACHE_SHIFT_5 179 bool 180 181config SYS_CACHE_SHIFT_6 182 bool 183 184config SYS_CACHE_SHIFT_7 185 bool 186 187config SYS_CACHELINE_SIZE 188 int 189 default 128 if SYS_CACHE_SHIFT_7 190 default 64 if SYS_CACHE_SHIFT_6 191 default 32 if SYS_CACHE_SHIFT_5 192 193config ARM_SMCCC 194 bool "Support for ARM SMC Calling Convention (SMCCC)" 195 depends on CPU_V7 || ARM64 196 select ARM_PSCI_FW 197 help 198 Say Y here if you want to enable ARM SMC Calling Convention. 199 This should be enabled if U-Boot needs to communicate with system 200 firmware (for example, PSCI) according to SMCCC. 201 202config SEMIHOSTING 203 bool "support boot from semihosting" 204 help 205 In emulated environments, semihosting is a way for 206 the hosted environment to call out to the emulator to 207 retrieve files from the host machine. 208 209config SYS_THUMB_BUILD 210 bool "Build U-Boot using the Thumb instruction set" 211 depends on !ARM64 212 help 213 Use this flag to build U-Boot using the Thumb instruction set for 214 ARM architectures. Thumb instruction set provides better code 215 density. For ARM architectures that support Thumb2 this flag will 216 result in Thumb2 code generated by GCC. 217 218config SPL_SYS_THUMB_BUILD 219 bool "Build SPL using the Thumb instruction set" 220 default y if SYS_THUMB_BUILD 221 depends on !ARM64 222 help 223 Use this flag to build SPL using the Thumb instruction set for 224 ARM architectures. Thumb instruction set provides better code 225 density. For ARM architectures that support Thumb2 this flag will 226 result in Thumb2 code generated by GCC. 227 228config SYS_L2CACHE_OFF 229 bool "L2cache off" 230 help 231 If SoC does not support L2CACHE or one do not want to enable 232 L2CACHE, choose this option. 233 234config ENABLE_ARM_SOC_BOOT0_HOOK 235 bool "prepare BOOT0 header" 236 help 237 If the SoC's BOOT0 requires a header area filled with (magic) 238 values, then choose this option, and create a define called 239 ARM_SOC_BOOT0_HOOK which contains the required assembler 240 preprocessor code. 241 242config ARM_CORTEX_CPU_IS_UP 243 bool 244 default n 245 246config USE_ARCH_MEMCPY 247 bool "Use an assembly optimized implementation of memcpy" 248 default y 249 depends on !ARM64 250 help 251 Enable the generation of an optimized version of memcpy. 252 Such implementation may be faster under some conditions 253 but may increase the binary size. 254 255config SPL_USE_ARCH_MEMCPY 256 bool "Use an assembly optimized implementation of memcpy for SPL" 257 default y if USE_ARCH_MEMCPY 258 depends on !ARM64 259 help 260 Enable the generation of an optimized version of memcpy. 261 Such implementation may be faster under some conditions 262 but may increase the binary size. 263 264config USE_ARCH_MEMSET 265 bool "Use an assembly optimized implementation of memset" 266 default y 267 depends on !ARM64 268 help 269 Enable the generation of an optimized version of memset. 270 Such implementation may be faster under some conditions 271 but may increase the binary size. 272 273config SPL_USE_ARCH_MEMSET 274 bool "Use an assembly optimized implementation of memset for SPL" 275 default y if USE_ARCH_MEMSET 276 depends on !ARM64 277 help 278 Enable the generation of an optimized version of memset. 279 Such implementation may be faster under some conditions 280 but may increase the binary size. 281 282config ARM64_SUPPORT_AARCH32 283 bool "ARM64 system support AArch32 execution state" 284 default y if ARM64 && !TARGET_THUNDERX_88XX 285 help 286 This ARM64 system supports AArch32 execution state. 287 288choice 289 prompt "Target select" 290 default TARGET_HIKEY 291 292config ARCH_AT91 293 bool "Atmel AT91" 294 select SPL_BOARD_INIT if SPL 295 296config TARGET_EDB93XX 297 bool "Support edb93xx" 298 select CPU_ARM920T 299 300config TARGET_ASPENITE 301 bool "Support aspenite" 302 select CPU_ARM926EJS 303 304config TARGET_GPLUGD 305 bool "Support gplugd" 306 select CPU_ARM926EJS 307 308config ARCH_DAVINCI 309 bool "TI DaVinci" 310 select CPU_ARM926EJS 311 imply CMD_SAVES 312 help 313 Support for TI's DaVinci platform. 314 315config KIRKWOOD 316 bool "Marvell Kirkwood" 317 select CPU_ARM926EJS 318 select BOARD_EARLY_INIT_F 319 select ARCH_MISC_INIT 320 321config ARCH_MVEBU 322 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 323 select OF_CONTROL 324 select OF_SEPARATE 325 select DM 326 select DM_ETH 327 select DM_SERIAL 328 select DM_SPI 329 select DM_SPI_FLASH 330 331config TARGET_DEVKIT3250 332 bool "Support devkit3250" 333 select CPU_ARM926EJS 334 select SUPPORT_SPL 335 336config TARGET_WORK_92105 337 bool "Support work_92105" 338 select CPU_ARM926EJS 339 select SUPPORT_SPL 340 341config TARGET_MX25PDK 342 bool "Support mx25pdk" 343 select BOARD_LATE_INIT 344 select CPU_ARM926EJS 345 select BOARD_EARLY_INIT_F 346 347config TARGET_ZMX25 348 bool "Support zmx25" 349 select BOARD_LATE_INIT 350 select CPU_ARM926EJS 351 352config TARGET_APF27 353 bool "Support apf27" 354 select CPU_ARM926EJS 355 select SUPPORT_SPL 356 357config TARGET_APX4DEVKIT 358 bool "Support apx4devkit" 359 select CPU_ARM926EJS 360 select SUPPORT_SPL 361 362config TARGET_XFI3 363 bool "Support xfi3" 364 select CPU_ARM926EJS 365 select SUPPORT_SPL 366 367config TARGET_M28EVK 368 bool "Support m28evk" 369 select CPU_ARM926EJS 370 select SUPPORT_SPL 371 372config TARGET_MX23EVK 373 bool "Support mx23evk" 374 select CPU_ARM926EJS 375 select SUPPORT_SPL 376 select BOARD_EARLY_INIT_F 377 378config TARGET_MX28EVK 379 bool "Support mx28evk" 380 select CPU_ARM926EJS 381 select SUPPORT_SPL 382 select BOARD_EARLY_INIT_F 383 384config TARGET_MX23_OLINUXINO 385 bool "Support mx23_olinuxino" 386 select CPU_ARM926EJS 387 select SUPPORT_SPL 388 select BOARD_EARLY_INIT_F 389 390config TARGET_BG0900 391 bool "Support bg0900" 392 select CPU_ARM926EJS 393 select SUPPORT_SPL 394 395config TARGET_SANSA_FUZE_PLUS 396 bool "Support sansa_fuze_plus" 397 select CPU_ARM926EJS 398 select SUPPORT_SPL 399 400config TARGET_SC_SPS_1 401 bool "Support sc_sps_1" 402 select CPU_ARM926EJS 403 select SUPPORT_SPL 404 405config ORION5X 406 bool "Marvell Orion" 407 select CPU_ARM926EJS 408 409config TARGET_SPEAR300 410 bool "Support spear300" 411 select CPU_ARM926EJS 412 select BOARD_EARLY_INIT_F 413 imply CMD_SAVES 414 415config TARGET_SPEAR310 416 bool "Support spear310" 417 select CPU_ARM926EJS 418 select BOARD_EARLY_INIT_F 419 imply CMD_SAVES 420 421config TARGET_SPEAR320 422 bool "Support spear320" 423 select CPU_ARM926EJS 424 select BOARD_EARLY_INIT_F 425 imply CMD_SAVES 426 427config TARGET_SPEAR600 428 bool "Support spear600" 429 select CPU_ARM926EJS 430 select BOARD_EARLY_INIT_F 431 imply CMD_SAVES 432 433config TARGET_STV0991 434 bool "Support stv0991" 435 select CPU_V7 436 select DM 437 select DM_SERIAL 438 select DM_SPI 439 select DM_SPI_FLASH 440 select SPI_FLASH 441 442config TARGET_X600 443 bool "Support x600" 444 select BOARD_LATE_INIT 445 select CPU_ARM926EJS 446 select SUPPORT_SPL 447 448config TARGET_IMX31_PHYCORE 449 bool "Support imx31_phycore_eet" 450 select CPU_ARM1136 451 select BOARD_EARLY_INIT_F 452 453config TARGET_IMX31_PHYCORE_EET 454 bool "Support imx31_phycore_eet" 455 select BOARD_LATE_INIT 456 select CPU_ARM1136 457 select BOARD_EARLY_INIT_F 458 459config TARGET_MX31ADS 460 bool "Support mx31ads" 461 select CPU_ARM1136 462 select BOARD_EARLY_INIT_F 463 464config TARGET_MX31PDK 465 bool "Support mx31pdk" 466 select BOARD_LATE_INIT 467 select CPU_ARM1136 468 select SUPPORT_SPL 469 select BOARD_EARLY_INIT_F 470 471config TARGET_WOODBURN 472 bool "Support woodburn" 473 select CPU_ARM1136 474 475config TARGET_WOODBURN_SD 476 bool "Support woodburn_sd" 477 select CPU_ARM1136 478 select SUPPORT_SPL 479 480config TARGET_FLEA3 481 bool "Support flea3" 482 select CPU_ARM1136 483 484config TARGET_MX35PDK 485 bool "Support mx35pdk" 486 select BOARD_LATE_INIT 487 select CPU_ARM1136 488 489config ARCH_BCM283X 490 bool "Broadcom BCM283X family" 491 select DM 492 select DM_SERIAL 493 select DM_GPIO 494 select OF_CONTROL 495 imply FAT_WRITE 496 497config TARGET_VEXPRESS_CA15_TC2 498 bool "Support vexpress_ca15_tc2" 499 select CPU_V7 500 select CPU_V7_HAS_NONSEC 501 select CPU_V7_HAS_VIRT 502 503config TARGET_VEXPRESS_CA5X2 504 bool "Support vexpress_ca5x2" 505 select CPU_V7 506 507config TARGET_VEXPRESS_CA9X4 508 bool "Support vexpress_ca9x4" 509 select CPU_V7 510 511config TARGET_BCM23550_W1D 512 bool "Support bcm23550_w1d" 513 select CPU_V7 514 imply CRC32_VERIFY 515 imply FAT_WRITE 516 517config TARGET_BCM28155_AP 518 bool "Support bcm28155_ap" 519 select CPU_V7 520 imply CRC32_VERIFY 521 imply FAT_WRITE 522 523config TARGET_BCMCYGNUS 524 bool "Support bcmcygnus" 525 select CPU_V7 526 imply CRC32_VERIFY 527 imply CMD_HASH 528 imply FAT_WRITE 529 imply HASH_VERIFY 530 imply NETDEVICES 531 imply BCM_SF2_ETH 532 imply BCM_SF2_ETH_GMAC 533 534config TARGET_BCMNSP 535 bool "Support bcmnsp" 536 select CPU_V7 537 538config TARGET_BCMNS2 539 bool "Support Broadcom Northstar2" 540 select ARM64 541 help 542 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 543 ARMv8 Cortex-A57 processors targeting a broad range of networking 544 applications 545 546config ARCH_EXYNOS 547 bool "Samsung EXYNOS" 548 select DM 549 select DM_I2C 550 select DM_SPI_FLASH 551 select DM_SERIAL 552 select DM_SPI 553 select DM_GPIO 554 select DM_KEYBOARD 555 imply FAT_WRITE 556 557config ARCH_S5PC1XX 558 bool "Samsung S5PC1XX" 559 select CPU_V7 560 select DM 561 select DM_SERIAL 562 select DM_GPIO 563 select DM_I2C 564 565config ARCH_HIGHBANK 566 bool "Calxeda Highbank" 567 select CPU_V7 568 569config ARCH_INTEGRATOR 570 bool "ARM Ltd. Integrator family" 571 select DM 572 select DM_SERIAL 573 574config ARCH_KEYSTONE 575 bool "TI Keystone" 576 select CPU_V7 577 select SUPPORT_SPL 578 select SYS_THUMB_BUILD 579 select CMD_POWEROFF 580 imply CMD_MTDPARTS 581 imply FIT 582 imply CMD_SAVES 583 584config ARCH_OMAP2PLUS 585 bool "TI OMAP2+" 586 select CPU_V7 587 select SPL_BOARD_INIT if SPL 588 select SUPPORT_SPL 589 imply FIT 590 591config ARCH_MESON 592 bool "Amlogic Meson" 593 help 594 Support for the Meson SoC family developed by Amlogic Inc., 595 targeted at media players and tablet computers. We currently 596 support the S905 (GXBaby) 64-bit SoC. 597 598config ARCH_MX7ULP 599 bool "NXP MX7ULP" 600 select CPU_V7 601 select ROM_UNIFIED_SECTIONS 602 603config ARCH_MX7 604 bool "Freescale MX7" 605 select CPU_V7 606 select SYS_FSL_HAS_SEC if SECURE_BOOT 607 select SYS_FSL_SEC_COMPAT_4 608 select SYS_FSL_SEC_LE 609 select BOARD_EARLY_INIT_F 610 select ARCH_MISC_INIT 611 612config ARCH_MX6 613 bool "Freescale MX6" 614 select CPU_V7 615 select SYS_FSL_HAS_SEC if SECURE_BOOT 616 select SYS_FSL_SEC_COMPAT_4 617 select SYS_FSL_SEC_LE 618 select SYS_THUMB_BUILD if SPL 619 620if ARCH_MX6 621config SPL_LDSCRIPT 622 default "arch/arm/mach-omap2/u-boot-spl.lds" 623endif 624 625config ARCH_MX5 626 bool "Freescale MX5" 627 select CPU_V7 628 select BOARD_EARLY_INIT_F 629 630config ARCH_RMOBILE 631 bool "Renesas ARM SoCs" 632 select DM 633 select DM_SERIAL 634 select BOARD_EARLY_INIT_F 635 imply FAT_WRITE 636 imply SYS_THUMB_BUILD 637 638config TARGET_S32V234EVB 639 bool "Support s32v234evb" 640 select ARM64 641 select SYS_FSL_ERRATUM_ESDHC111 642 643config ARCH_SNAPDRAGON 644 bool "Qualcomm Snapdragon SoCs" 645 select ARM64 646 select DM 647 select DM_GPIO 648 select DM_SERIAL 649 select SPMI 650 select OF_CONTROL 651 select OF_SEPARATE 652 653config ARCH_SOCFPGA 654 bool "Altera SOCFPGA family" 655 select CPU_V7 656 select SUPPORT_SPL 657 select OF_CONTROL 658 select SPL_OF_CONTROL 659 select DM 660 select DM_SPI_FLASH 661 select DM_SPI 662 select ENABLE_ARM_SOC_BOOT0_HOOK 663 select ARCH_EARLY_INIT_R 664 select ARCH_MISC_INIT 665 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 666 select SYS_THUMB_BUILD 667 imply CMD_MTDPARTS 668 imply CRC32_VERIFY 669 imply FAT_WRITE 670 671config ARCH_SUNXI 672 bool "Support sunxi (Allwinner) SoCs" 673 select CMD_GPIO 674 select CMD_MMC if MMC 675 select CMD_USB if DISTRO_DEFAULTS 676 select DM 677 select DM_ETH 678 select DM_GPIO 679 select DM_KEYBOARD 680 select DM_SERIAL 681 select DM_USB if DISTRO_DEFAULTS 682 select OF_BOARD_SETUP 683 select OF_CONTROL 684 select OF_SEPARATE 685 select SPL_STACK_R if SPL 686 select SPL_SYS_MALLOC_SIMPLE if SPL 687 select SYS_NS16550 688 select SPL_SYS_THUMB_BUILD if !ARM64 689 select USB if DISTRO_DEFAULTS 690 select USB_STORAGE if DISTRO_DEFAULTS 691 select USB_KEYBOARD if DISTRO_DEFAULTS 692 select USE_TINY_PRINTF 693 imply FAT_WRITE 694 imply PRE_CONSOLE_BUFFER 695 imply SPL_GPIO_SUPPORT 696 imply SPL_LIBCOMMON_SUPPORT 697 imply SPL_LIBDISK_SUPPORT 698 imply SPL_LIBGENERIC_SUPPORT 699 imply SPL_MMC_SUPPORT if MMC 700 imply SPL_POWER_SUPPORT 701 imply SPL_SERIAL_SUPPORT 702 703config TARGET_TS4600 704 bool "Support TS4600" 705 select CPU_ARM926EJS 706 select SUPPORT_SPL 707 708config ARCH_VF610 709 bool "Freescale Vybrid" 710 select CPU_V7 711 select SYS_FSL_ERRATUM_ESDHC111 712 imply CMD_MTDPARTS 713 imply NAND 714 715config ARCH_ZYNQ 716 bool "Xilinx Zynq Platform" 717 select BOARD_LATE_INIT 718 select CPU_V7 719 select SUPPORT_SPL 720 select OF_CONTROL 721 select SPL_BOARD_INIT if SPL 722 select SPL_OF_CONTROL if SPL 723 select DM 724 select DM_ETH 725 select DM_GPIO 726 select SPL_DM if SPL 727 select DM_MMC 728 select DM_MMC_OPS 729 select DM_SPI 730 select DM_SERIAL 731 select DM_SPI_FLASH 732 select SPL_SEPARATE_BSS if SPL 733 select DM_USB if USB 734 select BLK 735 select CLK 736 select SPL_CLK 737 select CLK_ZYNQ 738 imply CMD_CLK 739 imply FAT_WRITE 740 imply CMD_SPL 741 742config ARCH_ZYNQMP 743 bool "Support Xilinx ZynqMP Platform" 744 select ARM64 745 select BOARD_LATE_INIT 746 select DM 747 select OF_CONTROL 748 select DM_SERIAL 749 select SUPPORT_SPL 750 select CLK 751 select SPL_BOARD_INIT if SPL 752 select SPL_CLK 753 select DM_USB if USB 754 imply FAT_WRITE 755 756config TEGRA 757 bool "NVIDIA Tegra" 758 imply FAT_WRITE 759 760config TARGET_VEXPRESS64_AEMV8A 761 bool "Support vexpress_aemv8a" 762 select ARM64 763 764config TARGET_VEXPRESS64_BASE_FVP 765 bool "Support Versatile Express ARMv8a FVP BASE model" 766 select ARM64 767 select SEMIHOSTING 768 769config TARGET_VEXPRESS64_BASE_FVP_DRAM 770 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 771 select ARM64 772 help 773 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 774 the default config to allow the user to load the images directly into 775 DRAM using model parameters rather than by using semi-hosting to load 776 the files from the host filesystem. 777 778config TARGET_VEXPRESS64_JUNO 779 bool "Support Versatile Express Juno Development Platform" 780 select ARM64 781 782config TARGET_LS2080A_EMU 783 bool "Support ls2080a_emu" 784 select ARCH_LS2080A 785 select ARM64 786 select ARMV8_MULTIENTRY 787 select ARCH_MISC_INIT 788 help 789 Support for Freescale LS2080A_EMU platform 790 The LS2080A Development System (EMULATOR) is a pre silicon 791 development platform that supports the QorIQ LS2080A 792 Layerscape Architecture processor. 793 794config TARGET_LS2080A_SIMU 795 bool "Support ls2080a_simu" 796 select ARCH_LS2080A 797 select ARM64 798 select ARMV8_MULTIENTRY 799 select ARCH_MISC_INIT 800 help 801 Support for Freescale LS2080A_SIMU platform 802 The LS2080A Development System (QDS) is a pre silicon 803 development platform that supports the QorIQ LS2080A 804 Layerscape Architecture processor. 805 806config TARGET_LS2080AQDS 807 bool "Support ls2080aqds" 808 select ARCH_LS2080A 809 select ARM64 810 select ARMV8_MULTIENTRY 811 select BOARD_LATE_INIT 812 select SUPPORT_SPL 813 select ARCH_MISC_INIT 814 imply SCSI 815 help 816 Support for Freescale LS2080AQDS platform 817 The LS2080A Development System (QDS) is a high-performance 818 development platform that supports the QorIQ LS2080A 819 Layerscape Architecture processor. 820 821config TARGET_LS2080ARDB 822 bool "Support ls2080ardb" 823 select ARCH_LS2080A 824 select ARM64 825 select ARMV8_MULTIENTRY 826 select BOARD_LATE_INIT 827 select SUPPORT_SPL 828 select ARCH_MISC_INIT 829 imply SCSI 830 help 831 Support for Freescale LS2080ARDB platform. 832 The LS2080A Reference design board (RDB) is a high-performance 833 development platform that supports the QorIQ LS2080A 834 Layerscape Architecture processor. 835 836config TARGET_LS2081ARDB 837 bool "Support ls2081ardb" 838 select ARCH_LS2080A 839 select ARM64 840 select ARMV8_MULTIENTRY 841 select BOARD_LATE_INIT 842 select SUPPORT_SPL 843 select ARCH_MISC_INIT 844 help 845 Support for Freescale LS2081ARDB platform. 846 The LS2081A Reference design board (RDB) is a high-performance 847 development platform that supports the QorIQ LS2081A/LS2041A 848 Layerscape Architecture processor. 849 850config TARGET_HIKEY 851 bool "Support HiKey 96boards Consumer Edition Platform" 852 select ARM64 853 select DM 854 select DM_GPIO 855 select DM_SERIAL 856 select OF_CONTROL 857 help 858 Support for HiKey 96boards platform. It features a HI6220 859 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 860 861config TARGET_POPLAR 862 bool "Support Poplar 96boards Enterprise Edition Platform" 863 select ARM64 864 select DM 865 select OF_CONTROL 866 select DM_SERIAL 867 select DM_USB 868 help 869 Support for Poplar 96boards EE platform. It features a HI3798cv200 870 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 871 making it capable of running any commercial set-top solution based on 872 Linux or Android. 873 874config TARGET_LS1012AQDS 875 bool "Support ls1012aqds" 876 select ARCH_LS1012A 877 select ARM64 878 select BOARD_LATE_INIT 879 help 880 Support for Freescale LS1012AQDS platform. 881 The LS1012A Development System (QDS) is a high-performance 882 development platform that supports the QorIQ LS1012A 883 Layerscape Architecture processor. 884 885config TARGET_LS1012ARDB 886 bool "Support ls1012ardb" 887 select ARCH_LS1012A 888 select ARM64 889 select BOARD_LATE_INIT 890 imply SCSI 891 help 892 Support for Freescale LS1012ARDB platform. 893 The LS1012A Reference design board (RDB) is a high-performance 894 development platform that supports the QorIQ LS1012A 895 Layerscape Architecture processor. 896 897config TARGET_LS1012AFRDM 898 bool "Support ls1012afrdm" 899 select ARCH_LS1012A 900 select ARM64 901 help 902 Support for Freescale LS1012AFRDM platform. 903 The LS1012A Freedom board (FRDM) is a high-performance 904 development platform that supports the QorIQ LS1012A 905 Layerscape Architecture processor. 906 907config TARGET_LS1021AQDS 908 bool "Support ls1021aqds" 909 select BOARD_LATE_INIT 910 select CPU_V7 911 select CPU_V7_HAS_NONSEC 912 select CPU_V7_HAS_VIRT 913 select SUPPORT_SPL 914 select ARCH_LS1021A 915 select ARCH_SUPPORT_PSCI 916 select LS1_DEEP_SLEEP 917 select SYS_FSL_DDR 918 select BOARD_EARLY_INIT_F 919 imply SCSI 920 921config TARGET_LS1021ATWR 922 bool "Support ls1021atwr" 923 select BOARD_LATE_INIT 924 select CPU_V7 925 select CPU_V7_HAS_NONSEC 926 select CPU_V7_HAS_VIRT 927 select SUPPORT_SPL 928 select ARCH_LS1021A 929 select ARCH_SUPPORT_PSCI 930 select LS1_DEEP_SLEEP 931 select BOARD_EARLY_INIT_F 932 imply SCSI 933 934config TARGET_LS1021AIOT 935 bool "Support ls1021aiot" 936 select BOARD_LATE_INIT 937 select CPU_V7 938 select CPU_V7_HAS_NONSEC 939 select CPU_V7_HAS_VIRT 940 select SUPPORT_SPL 941 select ARCH_LS1021A 942 select ARCH_SUPPORT_PSCI 943 imply SCSI 944 help 945 Support for Freescale LS1021AIOT platform. 946 The LS1021A Freescale board (IOT) is a high-performance 947 development platform that supports the QorIQ LS1021A 948 Layerscape Architecture processor. 949 950config TARGET_LS1043AQDS 951 bool "Support ls1043aqds" 952 select ARCH_LS1043A 953 select ARM64 954 select ARMV8_MULTIENTRY 955 select BOARD_LATE_INIT 956 select SUPPORT_SPL 957 select BOARD_EARLY_INIT_F 958 imply SCSI 959 help 960 Support for Freescale LS1043AQDS platform. 961 962config TARGET_LS1043ARDB 963 bool "Support ls1043ardb" 964 select ARCH_LS1043A 965 select ARM64 966 select ARMV8_MULTIENTRY 967 select BOARD_LATE_INIT 968 select SUPPORT_SPL 969 select BOARD_EARLY_INIT_F 970 imply SCSI 971 help 972 Support for Freescale LS1043ARDB platform. 973 974config TARGET_LS1046AQDS 975 bool "Support ls1046aqds" 976 select ARCH_LS1046A 977 select ARM64 978 select ARMV8_MULTIENTRY 979 select BOARD_LATE_INIT 980 select SUPPORT_SPL 981 select DM_SPI_FLASH if DM_SPI 982 select BOARD_EARLY_INIT_F 983 imply SCSI 984 help 985 Support for Freescale LS1046AQDS platform. 986 The LS1046A Development System (QDS) is a high-performance 987 development platform that supports the QorIQ LS1046A 988 Layerscape Architecture processor. 989 990config TARGET_LS1046ARDB 991 bool "Support ls1046ardb" 992 select ARCH_LS1046A 993 select ARM64 994 select ARMV8_MULTIENTRY 995 select BOARD_LATE_INIT 996 select SUPPORT_SPL 997 select DM_SPI_FLASH if DM_SPI 998 select POWER_MC34VR500 999 select BOARD_EARLY_INIT_F 1000 imply SCSI 1001 help 1002 Support for Freescale LS1046ARDB platform. 1003 The LS1046A Reference Design Board (RDB) is a high-performance 1004 development platform that supports the QorIQ LS1046A 1005 Layerscape Architecture processor. 1006 1007config TARGET_H2200 1008 bool "Support h2200" 1009 select CPU_PXA 1010 1011config TARGET_ZIPITZ2 1012 bool "Support zipitz2" 1013 select CPU_PXA 1014 1015config TARGET_COLIBRI_PXA270 1016 bool "Support colibri_pxa270" 1017 select CPU_PXA 1018 1019config ARCH_UNIPHIER 1020 bool "Socionext UniPhier SoCs" 1021 select BOARD_LATE_INIT 1022 select CLK_UNIPHIER 1023 select DM 1024 select DM_GPIO 1025 select DM_I2C 1026 select DM_MMC 1027 select DM_RESET 1028 select DM_SERIAL 1029 select DM_USB 1030 select OF_CONTROL 1031 select OF_LIBFDT 1032 select PINCTRL 1033 select SPL_BOARD_INIT if SPL 1034 select SPL_DM if SPL 1035 select SPL_LIBCOMMON_SUPPORT if SPL 1036 select SPL_LIBGENERIC_SUPPORT if SPL 1037 select SPL_OF_CONTROL if SPL 1038 select SPL_PINCTRL if SPL 1039 select SUPPORT_SPL 1040 imply FAT_WRITE 1041 help 1042 Support for UniPhier SoC family developed by Socionext Inc. 1043 (formerly, System LSI Business Division of Panasonic Corporation) 1044 1045config STM32 1046 bool "Support STM32" 1047 select CPU_V7M 1048 select DM 1049 select DM_SERIAL 1050 select SYS_THUMB_BUILD 1051 1052config ARCH_STI 1053 bool "Support STMicrolectronics SoCs" 1054 select CPU_V7 1055 select DM 1056 select DM_SERIAL 1057 select BLK 1058 select DM_MMC 1059 select DM_RESET 1060 help 1061 Support for STMicroelectronics STiH407/10 SoC family. 1062 This SoC is used on Linaro 96Board STiH410-B2260 1063 1064config ARCH_ROCKCHIP 1065 bool "Support Rockchip SoCs" 1066 select OF_CONTROL 1067 select BLK 1068 select DM 1069 select SPL_DM if SPL 1070 select SYS_MALLOC_F 1071 select SYS_THUMB_BUILD if !ARM64 1072 select SPL_SYS_MALLOC_SIMPLE if SPL 1073 select DM_GPIO 1074 select DM_I2C 1075 select DM_MMC 1076 select DM_MMC_OPS 1077 select DM_SERIAL 1078 select DM_SPI 1079 select DM_SPI_FLASH 1080 select DM_USB if USB 1081 select DM_PWM 1082 select DM_REGULATOR 1083 imply FAT_WRITE 1084 1085config TARGET_THUNDERX_88XX 1086 bool "Support ThunderX 88xx" 1087 select ARM64 1088 select OF_CONTROL 1089 select SYS_CACHE_SHIFT_7 1090 1091config ARCH_ASPEED 1092 bool "Support Aspeed SoCs" 1093 select OF_CONTROL 1094 select DM 1095 1096endchoice 1097 1098source "arch/arm/mach-aspeed/Kconfig" 1099 1100source "arch/arm/mach-at91/Kconfig" 1101 1102source "arch/arm/mach-bcm283x/Kconfig" 1103 1104source "arch/arm/mach-davinci/Kconfig" 1105 1106source "arch/arm/mach-exynos/Kconfig" 1107 1108source "arch/arm/mach-highbank/Kconfig" 1109 1110source "arch/arm/mach-integrator/Kconfig" 1111 1112source "arch/arm/mach-keystone/Kconfig" 1113 1114source "arch/arm/mach-kirkwood/Kconfig" 1115 1116source "arch/arm/mach-mvebu/Kconfig" 1117 1118source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1119 1120source "arch/arm/mach-imx/mx7ulp/Kconfig" 1121 1122source "arch/arm/mach-imx/mx7/Kconfig" 1123 1124source "arch/arm/mach-imx/mx6/Kconfig" 1125 1126source "arch/arm/mach-imx/mx5/Kconfig" 1127 1128source "arch/arm/mach-omap2/Kconfig" 1129 1130source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1131 1132source "arch/arm/mach-orion5x/Kconfig" 1133 1134source "arch/arm/mach-rmobile/Kconfig" 1135 1136source "arch/arm/mach-meson/Kconfig" 1137 1138source "arch/arm/mach-rockchip/Kconfig" 1139 1140source "arch/arm/mach-s5pc1xx/Kconfig" 1141 1142source "arch/arm/mach-snapdragon/Kconfig" 1143 1144source "arch/arm/mach-socfpga/Kconfig" 1145 1146source "arch/arm/mach-sti/Kconfig" 1147 1148source "arch/arm/mach-stm32/Kconfig" 1149 1150source "arch/arm/mach-sunxi/Kconfig" 1151 1152source "arch/arm/mach-tegra/Kconfig" 1153 1154source "arch/arm/mach-uniphier/Kconfig" 1155 1156source "arch/arm/cpu/armv7/vf610/Kconfig" 1157 1158source "arch/arm/mach-zynq/Kconfig" 1159 1160source "arch/arm/cpu/armv7/Kconfig" 1161 1162source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1163 1164source "arch/arm/cpu/armv8/Kconfig" 1165 1166source "arch/arm/mach-imx/Kconfig" 1167 1168source "board/aries/m28evk/Kconfig" 1169source "board/bosch/shc/Kconfig" 1170source "board/CarMediaLab/flea3/Kconfig" 1171source "board/Marvell/aspenite/Kconfig" 1172source "board/Marvell/gplugd/Kconfig" 1173source "board/armadeus/apf27/Kconfig" 1174source "board/armltd/vexpress/Kconfig" 1175source "board/armltd/vexpress64/Kconfig" 1176source "board/bluegiga/apx4devkit/Kconfig" 1177source "board/broadcom/bcm23550_w1d/Kconfig" 1178source "board/broadcom/bcm28155_ap/Kconfig" 1179source "board/broadcom/bcmcygnus/Kconfig" 1180source "board/broadcom/bcmnsp/Kconfig" 1181source "board/broadcom/bcmns2/Kconfig" 1182source "board/cavium/thunderx/Kconfig" 1183source "board/cirrus/edb93xx/Kconfig" 1184source "board/creative/xfi3/Kconfig" 1185source "board/freescale/ls2080a/Kconfig" 1186source "board/freescale/ls2080aqds/Kconfig" 1187source "board/freescale/ls2080ardb/Kconfig" 1188source "board/freescale/ls1021aqds/Kconfig" 1189source "board/freescale/ls1043aqds/Kconfig" 1190source "board/freescale/ls1021atwr/Kconfig" 1191source "board/freescale/ls1021aiot/Kconfig" 1192source "board/freescale/ls1046aqds/Kconfig" 1193source "board/freescale/ls1043ardb/Kconfig" 1194source "board/freescale/ls1046ardb/Kconfig" 1195source "board/freescale/ls1012aqds/Kconfig" 1196source "board/freescale/ls1012ardb/Kconfig" 1197source "board/freescale/ls1012afrdm/Kconfig" 1198source "board/freescale/mx23evk/Kconfig" 1199source "board/freescale/mx25pdk/Kconfig" 1200source "board/freescale/mx28evk/Kconfig" 1201source "board/freescale/mx31ads/Kconfig" 1202source "board/freescale/mx31pdk/Kconfig" 1203source "board/freescale/mx35pdk/Kconfig" 1204source "board/freescale/s32v234evb/Kconfig" 1205source "board/gdsys/a38x/Kconfig" 1206source "board/grinn/chiliboard/Kconfig" 1207source "board/gumstix/pepper/Kconfig" 1208source "board/h2200/Kconfig" 1209source "board/hisilicon/hikey/Kconfig" 1210source "board/hisilicon/poplar/Kconfig" 1211source "board/imx31_phycore/Kconfig" 1212source "board/isee/igep003x/Kconfig" 1213source "board/olimex/mx23_olinuxino/Kconfig" 1214source "board/phytec/pcm051/Kconfig" 1215source "board/ppcag/bg0900/Kconfig" 1216source "board/sandisk/sansa_fuze_plus/Kconfig" 1217source "board/schulercontrol/sc_sps_1/Kconfig" 1218source "board/silica/pengwyn/Kconfig" 1219source "board/spear/spear300/Kconfig" 1220source "board/spear/spear310/Kconfig" 1221source "board/spear/spear320/Kconfig" 1222source "board/spear/spear600/Kconfig" 1223source "board/spear/x600/Kconfig" 1224source "board/st/stv0991/Kconfig" 1225source "board/syteco/zmx25/Kconfig" 1226source "board/tcl/sl50/Kconfig" 1227source "board/birdland/bav335x/Kconfig" 1228source "board/timll/devkit3250/Kconfig" 1229source "board/toradex/colibri_pxa270/Kconfig" 1230source "board/technologic/ts4600/Kconfig" 1231source "board/vscom/baltos/Kconfig" 1232source "board/woodburn/Kconfig" 1233source "board/work-microwave/work_92105/Kconfig" 1234source "board/zipitz2/Kconfig" 1235 1236source "arch/arm/Kconfig.debug" 1237 1238endmenu 1239 1240config SPL_LDSCRIPT 1241 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3 1242 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1243 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1244 1245 1246