xref: /openbmc/u-boot/drivers/gpio/Kconfig (revision 17cb4b8f)
1#
2# GPIO infrastructure and drivers
3#
4
5menu "GPIO Support"
6
7config DM_GPIO
8	bool "Enable Driver Model for GPIO drivers"
9	depends on DM
10	help
11	  Enable driver model for GPIO access. The standard GPIO
12	  interface (gpio_get_value(), etc.) is then implemented by
13	  the GPIO uclass. Drivers provide methods to query the
14	  particular GPIOs that they provide. The uclass interface
15	  is defined in include/asm-generic/gpio.h.
16
17config ALTERA_PIO
18	bool "Altera PIO driver"
19	depends on DM_GPIO
20	help
21	  Select this to enable PIO for Altera devices. Please find
22	  details on the "Embedded Peripherals IP User Guide" of Altera.
23
24config DWAPB_GPIO
25	bool "DWAPB GPIO driver"
26	depends on DM && DM_GPIO
27	default n
28	help
29	  Support for the Designware APB GPIO driver.
30
31config ATMEL_PIO4
32	bool "ATMEL PIO4 driver"
33	depends on DM
34	default n
35	help
36	  Say yes here to support the Atmel PIO4 driver.
37	  The PIO4 is new version of Atmel PIO controller, which manages
38	  up to 128 fully programmable input/output lines. Each I/O line
39	  may be dedicated as a general purpose I/O or be assigned to
40	  a function of an embedded peripheral.
41
42config INTEL_BROADWELL_GPIO
43	bool "Intel Broadwell GPIO driver"
44	depends on DM
45	help
46	  This driver supports Broadwell U devices which have an expanded
47	  GPIO feature set. The difference is large enough to merit a separate
48	  driver from the common Intel ICH6 driver. It supports a total of
49	  95 GPIOs which can be configured from the device tree.
50
51config LPC32XX_GPIO
52	bool "LPC32XX GPIO driver"
53	depends on DM
54	default n
55	help
56	  Support for the LPC32XX GPIO driver.
57
58config MSM_GPIO
59	bool "Qualcomm GPIO driver"
60	depends on DM_GPIO
61	default n
62	help
63	  Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
64	  This controller have single bank (default name "soc"), every
65	  gpio has it's own set of registers.
66	  Only simple GPIO operations are supported (get/set, change of
67	  direction and checking pin function).
68	  Supported devices:
69	  - APQ8016
70	  - MSM8916
71
72config PM8916_GPIO
73	bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
74	depends on DM_GPIO && PMIC_PM8916
75	help
76	  Support for GPIO pins and power/reset buttons found on
77	  Qualcomm PM8916 PMIC.
78	  Default name for GPIO bank is "pm8916".
79	  Power and reset buttons are placed in "pm8916_key" bank and
80          have gpio numbers 0 and 1 respectively.
81
82config ROCKCHIP_GPIO
83	bool "Rockchip GPIO driver"
84	depends on DM_GPIO
85	help
86	  Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
87	  a number of banks (different for each SoC type) each with 32 GPIOs.
88	  The GPIOs for a device are defined in the device tree with one node
89	  for each bank.
90
91config SANDBOX_GPIO
92	bool "Enable sandbox GPIO driver"
93	depends on SANDBOX && DM && DM_GPIO
94	help
95	  This driver supports some simulated GPIOs which can be adjusted
96	  using 'back door' functions like sandbox_gpio_set_value(). Then the
97	  GPIOs can be inspected through the normal get_get_value()
98	  interface. The purpose of this is to allow GPIOs to be used as
99	  normal in sandbox, perhaps with test code actually driving the
100	  behaviour of those GPIOs.
101
102config SANDBOX_GPIO_COUNT
103	int "Number of sandbox GPIOs"
104	depends on SANDBOX_GPIO
105	default 128
106	help
107	  The sandbox driver can support any number of GPIOs. Generally these
108	  are specified using the device tree. But you can also have a number
109	  of 'anonymous' GPIOs that do not belong to any device or bank.
110	  Select a suitable value depending on your needs.
111
112config GPIO_UNIPHIER
113	bool "UniPhier GPIO"
114	depends on ARCH_UNIPHIER
115	help
116	  Say yes here to support UniPhier GPIOs.
117
118config VYBRID_GPIO
119	bool "Vybrid GPIO driver"
120	depends on DM
121	default n
122	help
123	  Say yes here to support Vybrid vf610 GPIOs.
124
125config PIC32_GPIO
126	bool "Microchip PIC32 GPIO driver"
127	depends on DM_GPIO && MACH_PIC32
128	default y
129	help
130	  Say yes here to support Microchip PIC32 GPIOs.
131
132config MVEBU_GPIO
133	bool "Marvell MVEBU GPIO driver"
134	depends on DM_GPIO && ARCH_MVEBU
135	default y
136	help
137	  Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
138
139config ZYNQ_GPIO
140	bool "Zynq GPIO driver"
141	depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP)
142	default y
143	help
144	  Supports GPIO access on Zynq SoC.
145
146config DM_74X164
147	bool "74x164 serial-in/parallel-out 8-bits shift register"
148	depends on DM_GPIO
149	help
150	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
151	  shift registers, such as 74lv165, 74hc595.
152	  This driver can be used to provide access to more gpio outputs.
153
154config DM_PCA953X
155	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
156	depends on DM_GPIO
157	help
158	  Say yes here to provide access to several register-oriented
159	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
160	  models include:
161
162	  4 bits:	pca9536, pca9537
163
164	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
165			pca9556, pca9557, pca9574, tca6408, xra1202
166
167	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
168			tca6416
169
170	  24 bits:	tca6424
171
172	  40 bits:	pca9505, pca9698
173
174	  Now, max 24 bits chips and PCA953X compatible chips are
175	  supported
176endmenu
177