xref: /openbmc/u-boot/Makefile (revision 5614e71b) 
1#
2# (C) Copyright 2000-2013
3# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4#
5# SPDX-License-Identifier:	GPL-2.0+
6#
7
8VERSION = 2013
9PATCHLEVEL = 10
10SUBLEVEL =
11EXTRAVERSION =
12ifneq "$(SUBLEVEL)" ""
13U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
14else
15U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
16endif
17TIMESTAMP_FILE = $(obj)include/generated/timestamp_autogenerated.h
18VERSION_FILE = $(obj)include/generated/version_autogenerated.h
19
20HOSTARCH := $(shell uname -m | \
21	sed -e s/i.86/x86/ \
22	    -e s/sun4u/sparc64/ \
23	    -e s/arm.*/arm/ \
24	    -e s/sa110/arm/ \
25	    -e s/ppc64/powerpc/ \
26	    -e s/ppc/powerpc/ \
27	    -e s/macppc/powerpc/\
28	    -e s/sh.*/sh/)
29
30HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
31	    sed -e 's/\(cygwin\).*/cygwin/')
32
33export	HOSTARCH HOSTOS
34
35# Deal with colliding definitions from tcsh etc.
36VENDOR=
37
38#########################################################################
39# Allow for silent builds
40ifeq (,$(findstring s,$(MAKEFLAGS)))
41XECHO = echo
42else
43XECHO = :
44endif
45
46#########################################################################
47#
48# U-boot build supports generating object files in a separate external
49# directory. Two use cases are supported:
50#
51# 1) Add O= to the make command line
52# 'make O=/tmp/build all'
53#
54# 2) Set environment variable BUILD_DIR to point to the desired location
55# 'export BUILD_DIR=/tmp/build'
56# 'make'
57#
58# The second approach can also be used with a MAKEALL script
59# 'export BUILD_DIR=/tmp/build'
60# './MAKEALL'
61#
62# Command line 'O=' setting overrides BUILD_DIR environment variable.
63#
64# When none of the above methods is used the local build is performed and
65# the object files are placed in the source directory.
66#
67
68ifeq ("$(origin O)", "command line")
69BUILD_DIR := $(O)
70endif
71
72# Call a source code checker (by default, "sparse") as part of the
73# C compilation.
74#
75# Use 'make C=1' to enable checking of re-compiled files.
76#
77# See the linux kernel file "Documentation/sparse.txt" for more details,
78# including where to get the "sparse" utility.
79
80ifdef C
81ifeq ("$(origin C)", "command line")
82CHECKSRC := $(C)
83endif
84endif
85ifndef CHECKSRC
86  CHECKSRC = 0
87endif
88export CHECKSRC
89
90ifneq ($(BUILD_DIR),)
91saved-output := $(BUILD_DIR)
92
93# Attempt to create a output directory.
94$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
95
96# Verify if it was successful.
97BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
98$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
99endif # ifneq ($(BUILD_DIR),)
100
101OBJTREE		:= $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
102SPLTREE		:= $(OBJTREE)/spl
103TPLTREE		:= $(OBJTREE)/tpl
104SRCTREE		:= $(CURDIR)
105TOPDIR		:= $(SRCTREE)
106LNDIR		:= $(OBJTREE)
107export	TOPDIR SRCTREE OBJTREE SPLTREE TPLTREE
108
109MKCONFIG	:= $(SRCTREE)/mkconfig
110export MKCONFIG
111
112ifneq ($(OBJTREE),$(SRCTREE))
113REMOTE_BUILD	:= 1
114export REMOTE_BUILD
115endif
116
117# $(obj) and (src) are defined in config.mk but here in main Makefile
118# we also need them before config.mk is included which is the case for
119# some targets like unconfig, clean, clobber, distclean, etc.
120ifneq ($(OBJTREE),$(SRCTREE))
121obj := $(OBJTREE)/
122src := $(SRCTREE)/
123else
124obj :=
125src :=
126endif
127export obj src
128
129# Make sure CDPATH settings don't interfere
130unexport CDPATH
131
132#########################################################################
133
134# The "tools" are needed early, so put this first
135# Don't include stuff already done in $(LIBS)
136# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
137# is "yes"), so compile examples after U-Boot is compiled.
138SUBDIR_TOOLS = tools
139SUBDIR_EXAMPLES = examples/standalone examples/api
140SUBDIRS = $(SUBDIR_TOOLS)
141
142.PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE)
143
144ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
145
146# Include autoconf.mk before config.mk so that the config options are available
147# to all top level build files.  We need the dummy all: target to prevent the
148# dependency target in autoconf.mk.dep from being the default.
149all:
150sinclude $(obj)include/autoconf.mk.dep
151sinclude $(obj)include/autoconf.mk
152
153ifndef CONFIG_SANDBOX
154SUBDIRS += $(SUBDIR_EXAMPLES)
155endif
156
157# load ARCH, BOARD, and CPU configuration
158include $(obj)include/config.mk
159export	ARCH CPU BOARD VENDOR SOC
160
161# set default to nothing for native builds
162ifeq ($(HOSTARCH),$(ARCH))
163CROSS_COMPILE ?=
164endif
165
166# load other configuration
167include $(TOPDIR)/config.mk
168
169# Targets which don't build the source code
170NON_BUILD_TARGETS = backup clean clobber distclean mkproper tidy unconfig
171
172# Only do the generic board check when actually building, not configuring
173ifeq ($(filter $(NON_BUILD_TARGETS),$(MAKECMDGOALS)),)
174ifeq ($(findstring _config,$(MAKECMDGOALS)),)
175$(CHECK_GENERIC_BOARD)
176endif
177endif
178
179# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
180# that (or fail if absent).  Otherwise, search for a linker script in a
181# standard location.
182
183LDSCRIPT_MAKEFILE_DIR = $(dir $(LDSCRIPT))
184
185ifndef LDSCRIPT
186	#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
187	ifdef CONFIG_SYS_LDSCRIPT
188		# need to strip off double quotes
189		LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
190	endif
191endif
192
193# If there is no specified link script, we look in a number of places for it
194ifndef LDSCRIPT
195	ifeq ($(CONFIG_NAND_U_BOOT),y)
196		LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
197		ifeq ($(wildcard $(LDSCRIPT)),)
198			LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
199		endif
200	endif
201	ifeq ($(wildcard $(LDSCRIPT)),)
202		LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
203	endif
204	ifeq ($(wildcard $(LDSCRIPT)),)
205		LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
206	endif
207	ifeq ($(wildcard $(LDSCRIPT)),)
208		LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
209		# We don't expect a Makefile here
210		LDSCRIPT_MAKEFILE_DIR =
211	endif
212	ifeq ($(wildcard $(LDSCRIPT)),)
213$(error could not find linker script)
214	endif
215endif
216
217#########################################################################
218# U-Boot objects....order is important (i.e. start must be first)
219
220OBJS  = $(CPUDIR)/start.o
221ifeq ($(CPU),ppc4xx)
222OBJS += $(CPUDIR)/resetvec.o
223endif
224ifeq ($(CPU),mpc85xx)
225OBJS += $(CPUDIR)/resetvec.o
226endif
227
228OBJS := $(addprefix $(obj),$(OBJS))
229
230HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
231
232LIBS-y += lib/
233LIBS-$(CONFIG_RSA) += lib/rsa/
234LIBS-$(CONFIG_LZMA) += lib/lzma/
235LIBS-$(CONFIG_LZO) += lib/lzo/
236LIBS-$(CONFIG_ZLIB) += lib/zlib/
237LIBS-$(CONFIG_TIZEN) += lib/tizen/
238LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
239LIBS-y += $(CPUDIR)/
240ifdef SOC
241LIBS-y += $(CPUDIR)/$(SOC)/
242endif
243LIBS-$(CONFIG_IXP4XX_NPE) += drivers/net/npe/
244LIBS-$(CONFIG_OF_EMBED) += dts/
245LIBS-y += arch/$(ARCH)/lib/
246LIBS-y += fs/
247LIBS-y += net/
248LIBS-y += disk/
249LIBS-y += drivers/
250LIBS-y += drivers/dma/
251LIBS-y += drivers/gpio/
252LIBS-y += drivers/i2c/
253LIBS-y += drivers/input/
254LIBS-y += drivers/mmc/
255LIBS-y += drivers/mtd/
256LIBS-y += drivers/mtd/nand/
257LIBS-y += drivers/mtd/onenand/
258LIBS-y += drivers/mtd/ubi/
259LIBS-y += drivers/mtd/spi/
260LIBS-y += drivers/net/
261LIBS-y += drivers/net/phy/
262LIBS-y += drivers/pci/
263LIBS-y += drivers/power/ \
264	drivers/power/fuel_gauge/ \
265	drivers/power/mfd/ \
266	drivers/power/pmic/ \
267	drivers/power/battery/
268LIBS-y += drivers/spi/
269LIBS-$(CONFIG_FMAN_ENET) += drivers/net/fm/
270LIBS-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
271LIBS-y += drivers/serial/
272LIBS-y += drivers/usb/eth/
273LIBS-y += drivers/usb/gadget/
274LIBS-y += drivers/usb/host/
275LIBS-y += drivers/usb/musb/
276LIBS-y += drivers/usb/musb-new/
277LIBS-y += drivers/usb/phy/
278LIBS-y += drivers/usb/ulpi/
279LIBS-y += common/
280LIBS-y += lib/libfdt/
281LIBS-y += api/
282LIBS-y += post/
283LIBS-y += test/
284
285ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
286LIBS-y += arch/$(ARCH)/imx-common/
287endif
288
289LIBS-$(CONFIG_ARM) += arch/arm/cpu/
290LIBS-$(CONFIG_PPC) += arch/powerpc/cpu/
291
292LIBS-y += board/$(BOARDDIR)/
293
294LIBS-y := $(patsubst %/, %/built-in.o, $(LIBS-y))
295LIBS := $(addprefix $(obj),$(sort $(LIBS-y)))
296.PHONY : $(LIBS)
297
298# Add GCC lib
299ifdef USE_PRIVATE_LIBGCC
300ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
301PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/libgcc.o
302else
303PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
304endif
305else
306PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
307endif
308PLATFORM_LIBS += $(PLATFORM_LIBGCC)
309export PLATFORM_LIBS
310
311# Special flags for CPP when processing the linker script.
312# Pass the version down so we can handle backwards compatibility
313# on the fly.
314LDPPFLAGS += \
315	-include $(TOPDIR)/include/u-boot/u-boot.lds.h \
316	-DCPUDIR=$(CPUDIR) \
317	$(shell $(LD) --version | \
318	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
319
320__OBJS := $(subst $(obj),,$(OBJS))
321__LIBS := $(subst $(obj),,$(LIBS))
322
323#########################################################################
324#########################################################################
325
326ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
327BOARD_SIZE_CHECK = \
328	@actual=`wc -c $@ | awk '{print $$1}'`; \
329	limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
330	if test $$actual -gt $$limit; then \
331		echo "$@ exceeds file size limit:" >&2 ; \
332		echo "  limit:  $$limit bytes" >&2 ; \
333		echo "  actual: $$actual bytes" >&2 ; \
334		echo "  excess: $$((actual - limit)) bytes" >&2; \
335		exit 1; \
336	fi
337else
338BOARD_SIZE_CHECK =
339endif
340
341# Always append ALL so that arch config.mk's can add custom ones
342ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
343
344ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
345ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
346ALL-$(CONFIG_RAMBOOT_PBL) += $(obj)u-boot.pbl
347ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
348ALL-$(CONFIG_SPL_FRAMEWORK) += $(obj)u-boot.img
349ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bin
350ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
351ifneq ($(CONFIG_SPL_TARGET),)
352ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
353endif
354
355# enable combined SPL/u-boot/dtb rules for tegra
356ifneq ($(CONFIG_TEGRA),)
357ifeq ($(CONFIG_OF_SEPARATE),y)
358ALL-y += $(obj)u-boot-dtb-tegra.bin
359else
360ALL-y += $(obj)u-boot-nodtb-tegra.bin
361endif
362endif
363
364build := -f $(TOPDIR)/scripts/Makefile.build -C
365
366all:		$(ALL-y) $(SUBDIR_EXAMPLES)
367
368$(obj)u-boot.dtb:	checkdtc $(obj)u-boot
369		$(MAKE) $(build) dts binary
370		mv $(obj)dts/dt.dtb $@
371
372$(obj)u-boot-dtb.bin:	$(obj)u-boot.bin $(obj)u-boot.dtb
373		cat $^ >$@
374
375$(obj)u-boot.hex:	$(obj)u-boot
376		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
377
378$(obj)u-boot.srec:	$(obj)u-boot
379		$(OBJCOPY) -O srec $< $@
380
381$(obj)u-boot.bin:	$(obj)u-boot
382		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
383		$(BOARD_SIZE_CHECK)
384
385$(obj)u-boot.ldr:	$(obj)u-boot
386		$(CREATE_LDR_ENV)
387		$(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
388		$(BOARD_SIZE_CHECK)
389
390$(obj)u-boot.ldr.hex:	$(obj)u-boot.ldr
391		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
392
393$(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
394		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
395
396#
397# U-Boot entry point, needed for booting of full-blown U-Boot
398# from the SPL U-Boot version.
399#
400ifndef CONFIG_SYS_UBOOT_START
401CONFIG_SYS_UBOOT_START := 0
402endif
403
404$(obj)u-boot.img:	$(obj)u-boot.bin
405		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
406		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
407		-e $(CONFIG_SYS_UBOOT_START) \
408		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
409			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
410		-d $< $@
411
412$(obj)u-boot.imx: $(obj)u-boot.bin depend
413		$(MAKE) $(build) $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
414
415$(obj)u-boot.kwb:       $(obj)u-boot.bin
416		$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
417		-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
418
419$(obj)u-boot.pbl:	$(obj)u-boot.bin
420		$(obj)tools/mkimage -n $(CONFIG_PBLRCW_CONFIG) \
421		-R $(CONFIG_PBLPBI_CONFIG) -T pblimage \
422		-d $< $@
423
424$(obj)u-boot.sha1:	$(obj)u-boot.bin
425		$(obj)tools/ubsha1 $(obj)u-boot.bin
426
427$(obj)u-boot.dis:	$(obj)u-boot
428		$(OBJDUMP) -d $< > $@
429
430# $@ is output, $(1) and $(2) are inputs, $(3) is padded intermediate,
431# $(4) is pad-to
432SPL_PAD_APPEND = \
433		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(4) -I binary -O binary \
434		$(1) $(obj)$(3); \
435		cat $(obj)$(3) $(2) > $@; \
436		rm $(obj)$(3)
437
438ifdef CONFIG_TPL
439SPL_PAYLOAD := $(obj)tpl/u-boot-with-tpl.bin
440else
441SPL_PAYLOAD := $(obj)u-boot.bin
442endif
443
444$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(SPL_PAYLOAD)
445		$(call SPL_PAD_APPEND,$<,$(SPL_PAYLOAD),spl/u-boot-spl-pad.bin,$(CONFIG_SPL_PAD_TO))
446
447$(obj)tpl/u-boot-with-tpl.bin: $(obj)tpl/u-boot-tpl.bin $(obj)u-boot.bin
448		$(call SPL_PAD_APPEND,$<,$(obj)u-boot.bin,tpl/u-boot-tpl-pad.bin,$(CONFIG_TPL_PAD_TO))
449
450$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
451		$(MAKE) $(build) $(SRCTREE)/arch/arm/imx-common \
452			$(OBJTREE)/u-boot-with-spl.imx
453
454$(obj)u-boot-with-nand-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
455		$(MAKE) $(build) $(SRCTREE)/arch/arm/imx-common \
456			$(OBJTREE)/u-boot-with-nand-spl.imx
457
458$(obj)u-boot.ubl:       $(obj)u-boot-with-spl.bin
459		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
460		-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
461
462$(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
463		$(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
464			-T aisimage \
465			-e $(CONFIG_SPL_TEXT_BASE) \
466			-d $(obj)spl/u-boot-spl.bin \
467			$(obj)spl/u-boot-spl.ais
468		$(OBJCOPY) ${OBJCFLAGS} -I binary \
469			--pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary \
470			$(obj)spl/u-boot-spl.ais $(obj)spl/u-boot-spl-pad.ais
471		cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.img > \
472			$(obj)u-boot.ais
473
474
475$(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
476		$(MAKE) $(build) $(SRCTREE)/$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb
477
478# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
479# Both images are created using mkimage (crc etc), so that the ROM
480# bootloader can check its integrity. Padding needs to be done to the
481# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
482# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
483# The resulting image containing both U-Boot images is called u-boot.spr
484$(obj)u-boot.spr:	$(obj)u-boot.img $(obj)spl/u-boot-spl.bin
485		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
486		-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER \
487		-d $(obj)spl/u-boot-spl.bin $(obj)spl/u-boot-spl.img
488		tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_SPL_PAD_TO) \
489			of=$(obj)spl/u-boot-spl-pad.img 2>/dev/null
490		dd if=$(obj)spl/u-boot-spl.img of=$(obj)spl/u-boot-spl-pad.img \
491			conv=notrunc 2>/dev/null
492		cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
493
494ifneq ($(CONFIG_TEGRA),)
495$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
496		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
497		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
498		rm $(obj)spl/u-boot-spl-pad.bin
499
500ifeq ($(CONFIG_OF_SEPARATE),y)
501$(obj)u-boot-dtb-tegra.bin: $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb
502		cat $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb > $@
503endif
504endif
505
506$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
507		cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
508
509# PPC4xx needs the SPL at the end of the image, since the reset vector
510# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
511# and need to introduce a new build target with the full blown U-Boot
512# at the start padded up to the start of the SPL image. And then concat
513# the SPL image to the end.
514$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
515		tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \
516			of=$(obj)u-boot-pad.img 2>/dev/null
517		dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \
518			conv=notrunc 2>/dev/null
519		cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
520
521ifeq ($(CONFIG_SANDBOX),y)
522GEN_UBOOT = \
523		cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
524			-Wl,--start-group $(__LIBS) -Wl,--end-group \
525			$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
526else
527GEN_UBOOT = \
528		cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
529			$(__OBJS) \
530			--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
531			-Map u-boot.map -o u-boot
532endif
533
534$(obj)u-boot:	depend \
535		$(SUBDIR_TOOLS) $(OBJS) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
536		$(GEN_UBOOT)
537ifeq ($(CONFIG_KALLSYMS),y)
538		smap=`$(call SYSTEM_MAP,$(obj)u-boot) | \
539			awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
540		$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
541			-c common/system_map.c -o $(obj)common/system_map.o
542		$(GEN_UBOOT) $(obj)common/system_map.o
543endif
544
545$(OBJS):
546	@:
547
548$(LIBS):	depend $(SUBDIR_TOOLS)
549		$(MAKE) $(build) $(dir $(subst $(obj),,$@))
550
551$(SUBDIRS):	depend
552		$(MAKE) -C $@ all
553
554$(SUBDIR_EXAMPLES): $(obj)u-boot
555
556$(LDSCRIPT):	depend
557		$(MAKE) -C $(dir $@) $(notdir $@)
558
559$(obj)u-boot.lds: $(LDSCRIPT)
560		$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
561
562nand_spl:	$(TIMESTAMP_FILE) $(VERSION_FILE) depend
563		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
564
565$(obj)u-boot-nand.bin:	nand_spl $(obj)u-boot.bin
566		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
567
568$(obj)spl/u-boot-spl.bin:	$(SUBDIR_TOOLS) depend
569		$(MAKE) -C spl all
570
571$(obj)tpl/u-boot-tpl.bin:	$(SUBDIR_TOOLS) depend
572		$(MAKE) -C spl all CONFIG_TPL_BUILD=y
573
574updater:
575		$(MAKE) -C tools/updater all
576
577# Explicitly make _depend in subdirs containing multiple targets to prevent
578# parallel sub-makes creating .depend files simultaneously.
579depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE) \
580		$(obj)include/spl-autoconf.mk \
581		$(obj)include/tpl-autoconf.mk \
582		$(obj)include/autoconf.mk \
583		$(obj)include/generated/generic-asm-offsets.h \
584		$(obj)include/generated/asm-offsets.h
585
586TAG_SUBDIRS = $(SUBDIRS)
587TAG_SUBDIRS += $(dir $(__LIBS))
588TAG_SUBDIRS += include
589
590FIND := find
591FINDFLAGS := -L
592
593checkstack:
594		$(CROSS_COMPILE)objdump -d $(obj)u-boot \
595			`$(FIND) $(obj) -name u-boot-spl -print` | \
596			perl $(src)tools/checkstack.pl $(ARCH)
597
598tags ctags:
599		ctags -w -o $(obj)ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
600						-name '*.[chS]' -print`
601
602etags:
603		etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
604						-name '*.[chS]' -print`
605cscope:
606		$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
607						cscope.files
608		cscope -b -q -k
609
610SYSTEM_MAP = \
611		$(NM) $1 | \
612		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
613		LC_ALL=C sort
614$(obj)System.map:	$(obj)u-boot
615		@$(call SYSTEM_MAP,$<) > $@
616
617checkthumb:
618	@if test $(call cc-version) -lt 0404; then \
619		echo -n '*** Your GCC does not produce working '; \
620		echo 'binaries in THUMB mode.'; \
621		echo '*** Your board is configured for THUMB mode.'; \
622		false; \
623	fi
624
625# GCC 3.x is reported to have problems generating the type of relocation
626# that U-Boot wants.
627# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
628checkgcc4:
629	@if test $(call cc-version) -lt 0400; then \
630		echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
631		false; \
632	fi
633
634checkdtc:
635	@if test $(call dtc-version) -lt 0104; then \
636		echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
637		false; \
638	fi
639
640#
641# Auto-generate the autoconf.mk file (which is included by all makefiles)
642#
643# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
644# the dep file is only include in this top level makefile to determine when
645# to regenerate the autoconf.mk file.
646$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
647	@$(XECHO) Generating $@ ; \
648	set -e ; \
649	: Generate the dependancies ; \
650	$(CC) -x c -DDO_DEPS_ONLY -M $(CFLAGS) $(CPPFLAGS) \
651		-MQ $(obj)include/autoconf.mk include/common.h > $@
652
653$(obj)include/autoconf.mk: $(obj)include/config.h
654	@$(XECHO) Generating $@ ; \
655	set -e ; \
656	: Extract the config macros ; \
657	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
658		sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
659	mv $@.tmp $@
660
661# Auto-generate the spl-autoconf.mk file (which is included by all makefiles for SPL)
662$(obj)include/tpl-autoconf.mk: $(obj)include/config.h
663	@$(XECHO) Generating $@ ; \
664	set -e ; \
665	: Extract the config macros ; \
666	$(CPP) $(CFLAGS) -DCONFIG_TPL_BUILD  -DCONFIG_SPL_BUILD\
667			-DDO_DEPS_ONLY -dM include/common.h | \
668	sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
669	mv $@.tmp $@
670
671$(obj)include/spl-autoconf.mk: $(obj)include/config.h
672	@$(XECHO) Generating $@ ; \
673	set -e ; \
674	: Extract the config macros ; \
675	$(CPP) $(CFLAGS) -DCONFIG_SPL_BUILD -DDO_DEPS_ONLY -dM include/common.h | \
676	sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
677	mv $@.tmp $@
678
679$(obj)include/generated/generic-asm-offsets.h:	$(obj)include/autoconf.mk.dep \
680	$(obj)include/spl-autoconf.mk \
681	$(obj)include/tpl-autoconf.mk \
682	$(obj)lib/asm-offsets.s
683	@$(XECHO) Generating $@
684	tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@
685
686$(obj)lib/asm-offsets.s:	$(obj)include/autoconf.mk.dep \
687	$(obj)include/spl-autoconf.mk \
688	$(obj)include/tpl-autoconf.mk \
689	$(src)lib/asm-offsets.c
690	@mkdir -p $(obj)lib
691	$(CC) -DDO_DEPS_ONLY \
692		$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
693		-o $@ $(src)lib/asm-offsets.c -c -S
694
695$(obj)include/generated/asm-offsets.h:	$(obj)include/autoconf.mk.dep \
696	$(obj)include/spl-autoconf.mk \
697	$(obj)include/tpl-autoconf.mk \
698	$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
699	@$(XECHO) Generating $@
700	tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@
701
702$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s:	$(obj)include/autoconf.mk.dep \
703	$(obj)include/spl-autoconf.mk \
704	$(obj)include/tpl-autoconf.mk
705	@mkdir -p $(obj)$(CPUDIR)/$(SOC)
706	if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then \
707		$(CC) -DDO_DEPS_ONLY \
708		$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
709			-o $@ $(src)$(CPUDIR)/$(SOC)/asm-offsets.c -c -S; \
710	else \
711		touch $@; \
712	fi
713
714#########################################################################
715else	# !config.mk
716all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
717$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
718$(filter-out tools,$(SUBDIRS)) \
719updater depend dep tags ctags etags cscope $(obj)System.map:
720	@echo "System not configured - see README" >&2
721	@ exit 1
722
723tools: $(VERSION_FILE) $(TIMESTAMP_FILE)
724	$(MAKE) -C $@ all
725endif	# config.mk
726
727# ARM relocations should all be R_ARM_RELATIVE.
728checkarmreloc: $(obj)u-boot
729	@if test "R_ARM_RELATIVE" != \
730		"`$(CROSS_COMPILE)readelf -r $< | cut -d ' ' -f 4 | grep R_ARM | sort -u`"; \
731		then echo "$< contains relocations other than \
732		R_ARM_RELATIVE"; false; fi
733
734$(VERSION_FILE):
735		@mkdir -p $(dir $(VERSION_FILE))
736		@( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
737		   printf '#define PLAIN_VERSION "%s%s"\n' \
738			"$(U_BOOT_VERSION)" "$${localvers}" ; \
739		   printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' \
740			"$(U_BOOT_VERSION)" "$${localvers}" ; \
741		) > $@.tmp
742		@( printf '#define CC_VERSION_STRING "%s"\n' \
743		 '$(shell $(CC) --version | head -n 1)' )>>  $@.tmp
744		@( printf '#define LD_VERSION_STRING "%s"\n' \
745		 '$(shell $(LD) -v | head -n 1)' )>>  $@.tmp
746		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
747
748$(TIMESTAMP_FILE):
749		@mkdir -p $(dir $(TIMESTAMP_FILE))
750		@LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@.tmp
751		@LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@.tmp
752		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
753
754easylogo env gdb:
755	$(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION}
756gdbtools: gdb
757
758xmldocs pdfdocs psdocs htmldocs mandocs: tools/kernel-doc/docproc
759	$(MAKE) U_BOOT_VERSION=$(U_BOOT_VERSION) -C doc/DocBook/ $@
760
761tools-all: easylogo env gdb $(VERSION_FILE) $(TIMESTAMP_FILE)
762	$(MAKE) -C tools HOST_TOOLS_ALL=y
763
764.PHONY : CHANGELOG
765CHANGELOG:
766	git log --no-merges U-Boot-1_1_5.. | \
767	unexpand -a | sed -e 's/\s\s*$$//' > $@
768
769include/license.h: tools/bin2header COPYING
770	cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
771#########################################################################
772
773unconfig:
774	@rm -f $(obj)include/config.h $(obj)include/config.mk \
775		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
776		$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep \
777		$(obj)include/spl-autoconf.mk \
778		$(obj)include/tpl-autoconf.mk
779
780%_config::	unconfig
781	@$(MKCONFIG) -A $(@:_config=)
782
783sinclude $(obj).boards.depend
784$(obj).boards.depend:	boards.cfg
785	@awk '(NF && $$1 !~ /^#/) { print $$7 ": " $$7 "_config; $$(MAKE)" }' $< > $@
786
787#########################################################################
788#########################################################################
789
790clean:
791	@rm -f $(obj)examples/standalone/82559_eeprom			  \
792	       $(obj)examples/standalone/atmel_df_pow2			  \
793	       $(obj)examples/standalone/eepro100_eeprom		  \
794	       $(obj)examples/standalone/hello_world			  \
795	       $(obj)examples/standalone/interrupt			  \
796	       $(obj)examples/standalone/mem_to_mem_idma2intr		  \
797	       $(obj)examples/standalone/sched				  \
798	       $(obj)examples/standalone/smc911{11,x}_eeprom		  \
799	       $(obj)examples/standalone/test_burst			  \
800	       $(obj)examples/standalone/timer
801	@rm -f $(obj)examples/api/demo{,.bin}
802	@rm -f $(obj)tools/bmp_logo	   $(obj)tools/easylogo/easylogo  \
803	       $(obj)tools/env/{fw_printenv,fw_setenv}			  \
804	       $(obj)tools/envcrc					  \
805	       $(obj)tools/gdb/{astest,gdbcont,gdbsend}			  \
806	       $(obj)tools/gen_eth_addr    $(obj)tools/img2srec		  \
807	       $(obj)tools/mk{env,}image   $(obj)tools/mpc86x_clk	  \
808	       $(obj)tools/mk{$(BOARD),}spl				  \
809	       $(obj)tools/mxsboot					  \
810	       $(obj)tools/ncb		   $(obj)tools/ubsha1		  \
811	       $(obj)tools/kernel-doc/docproc				  \
812	       $(obj)tools/proftool
813	@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}	  \
814	       $(obj)board/matrix_vision/*/bootscript.img		  \
815	       $(obj)board/voiceblue/eeprom 				  \
816	       $(obj)u-boot.lds						  \
817	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]	  \
818	       $(obj)arch/blackfin/cpu/init.{lds,elf}
819	@rm -f $(obj)include/bmp_logo.h
820	@rm -f $(obj)include/bmp_logo_data.h
821	@rm -f $(obj)lib/asm-offsets.s
822	@rm -f $(obj)include/generated/asm-offsets.h
823	@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
824	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
825	@$(MAKE) -s -C doc/DocBook/ cleandocs
826	@find $(OBJTREE) -type f \
827		\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
828		-o -name '*.o'	-o -name '*.a' -o -name '*.exe' \
829		-o -name '*.cfgtmp' \) -print \
830		| xargs rm -f
831
832# Removes everything not needed for testing u-boot
833tidy:	clean
834	@find $(OBJTREE) -type f \( -name '*.depend*' \) -print | xargs rm -f
835
836clobber:	tidy
837	@find $(OBJTREE) -type f \( -name '*.srec' \
838		-o -name '*.bin' -o -name u-boot.img \) \
839		-print0 | xargs -0 rm -f
840	@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
841		$(obj)cscope.* $(obj)*.*~
842	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
843	@rm -f $(obj)u-boot.kwb
844	@rm -f $(obj)u-boot.pbl
845	@rm -f $(obj)u-boot.imx
846	@rm -f $(obj)u-boot-with-spl.imx
847	@rm -f $(obj)u-boot-with-nand-spl.imx
848	@rm -f $(obj)u-boot.ubl
849	@rm -f $(obj)u-boot.ais
850	@rm -f $(obj)u-boot.dtb
851	@rm -f $(obj)u-boot.sb
852	@rm -f $(obj)u-boot.bd
853	@rm -f $(obj)u-boot.spr
854	@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
855	@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
856	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
857	@rm -f $(obj)spl/u-boot-spl.lds
858	@rm -f $(obj)tpl/{u-boot-tpl,u-boot-tpl.bin,u-boot-tpl.map}
859	@rm -f $(obj)tpl/u-boot-spl.lds
860	@rm -f $(obj)MLO MLO.byteswap
861	@rm -f $(obj)SPL
862	@rm -f $(obj)tools/xway-swap-bytes
863	@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
864	@rm -fr $(obj)include/generated
865	@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
866	@rm -f $(obj)dts/*.tmp
867	@rm -f $(obj)spl/u-boot-spl{,-pad}.ais
868
869mrproper \
870distclean:	clobber unconfig
871ifneq ($(OBJTREE),$(SRCTREE))
872	rm -rf $(obj)*
873endif
874
875backup:
876	F=`basename $(TOPDIR)` ; cd .. ; \
877	gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
878
879#########################################################################
880