SPDX: Convert all of our single license tags to Linux Kernel styleWhen U-Boot started using SPDX tags we were among the early adopters andthere weren't a lot of other examples to borrow from. So
SPDX: Convert all of our single license tags to Linux Kernel styleWhen U-Boot started using SPDX tags we were among the early adopters andthere weren't a lot of other examples to borrow from. So we picked thearea of the file that usually had a full license text and replaced itwith an appropriate SPDX-License-Identifier: entry. Since then, theLinux Kernel has adopted SPDX tags and they place it as the very firstline in a file (except where shebangs are used, then it's second line)and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibilityand in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declaredlicense in the tag as both the before and after are identical in tagcontents. There's also a few places where I found we did not have a tagand have introduced one.Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
board: tbs2910: add private imx configAdd board specific imx config file with recommended IPU Qos settingsand adapted DDR configuration.Signed-off-by: Soeren Moch <smoch@web.de>
imx: reorganize IMX code as other SOCsChange is consistent with other SOCs and it is in preparationfor adding SOMs. SOC's related files are moved from cpu/ tomach-imx/<SOC>.This change is also
imx: reorganize IMX code as other SOCsChange is consistent with other SOCs and it is in preparationfor adding SOMs. SOC's related files are moved from cpu/ tomach-imx/<SOC>.This change is also coherent with the structure in kernel.Signed-off-by: Stefano Babic <sbabic@denx.de>CC: Fabio Estevam <fabio.estevam@nxp.com>CC: Akshay Bhat <akshaybhat@timesys.com>CC: Ken Lin <Ken.Lin@advantech.com.tw>CC: Marek Vasut <marek.vasut@gmail.com>CC: Heiko Schocher <hs@denx.de>CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>CC: Christian Gmeiner <christian.gmeiner@gmail.com>CC: Stefan Roese <sr@denx.de>CC: Patrick Bruenn <p.bruenn@beckhoff.com>CC: Troy Kisky <troy.kisky@boundarydevices.com>CC: Nikita Kiryanov <nikita@compulab.co.il>CC: Otavio Salvador <otavio@ossystems.com.br>CC: "Eric Bénard" <eric@eukrea.com>CC: Jagan Teki <jagan@amarulasolutions.com>CC: Ye Li <ye.li@nxp.com>CC: Peng Fan <peng.fan@nxp.com>CC: Adrian Alonso <adrian.alonso@nxp.com>CC: Alison Wang <b18965@freescale.com>CC: Tim Harvey <tharvey@gateworks.com>CC: Martin Donnelly <martin.donnelly@ge.com>CC: Marcin Niestroj <m.niestroj@grinn-global.com>CC: Lukasz Majewski <lukma@denx.de>CC: Adam Ford <aford173@gmail.com>CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>CC: Boris Brezillon <boris.brezillon@free-electrons.com>CC: Soeren Moch <smoch@web.de>CC: Richard Hu <richard.hu@technexion.com>CC: Wig Cheng <wig.cheng@technexion.com>CC: Vanessa Maegima <vanessa.maegima@nxp.com>CC: Max Krummenacher <max.krummenacher@toradex.com>CC: Stefan Agner <stefan.agner@toradex.com>CC: Markus Niebel <Markus.Niebel@tq-group.com>CC: Breno Lima <breno.lima@nxp.com>CC: Francesco Montefoschi <francesco.montefoschi@udoo.org>CC: Jaehoon Chung <jh80.chung@samsung.com>CC: Scott Wood <oss@buserror.net>CC: Joe Hershberger <joe.hershberger@ni.com>CC: Anatolij Gustschin <agust@denx.de>CC: Simon Glass <sjg@chromium.org>CC: "Andrew F. Davis" <afd@ti.com>CC: "Łukasz Majewski" <l.majewski@samsung.com>CC: Patrice Chotard <patrice.chotard@st.com>CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>CC: Hans de Goede <hdegoede@redhat.com>CC: Masahiro Yamada <yamada.masahiro@socionext.com>CC: Stephen Warren <swarren@nvidia.com>CC: Andre Przywara <andre.przywara@arm.com>CC: "Álvaro Fernández Rojas" <noltari@gmail.com>CC: York Sun <york.sun@nxp.com>CC: Xiaoliang Yang <xiaoliang.yang@nxp.com>CC: Chen-Yu Tsai <wens@csie.org>CC: George McCollister <george.mccollister@gmail.com>CC: Sven Ebenfeld <sven.ebenfeld@gmail.com>CC: Filip Brozovic <fbrozovic@gmail.com>CC: Petr Kulhavy <brain@jikos.cz>CC: Eric Nelson <eric@nelint.com>CC: Bai Ping <ping.bai@nxp.com>CC: Anson Huang <Anson.Huang@nxp.com>CC: Sanchayan Maity <maitysanchayan@gmail.com>CC: Lokesh Vutla <lokeshvutla@ti.com>CC: Patrick Delaunay <patrick.delaunay@st.com>CC: Gary Bisson <gary.bisson@boundarydevices.com>CC: Alexander Graf <agraf@suse.de>CC: u-boot@lists.denx.deReviewed-by: Fabio Estevam <fabio.estevam@nxp.com>Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
tbs2910: Make Ethernet functional againConfigure the PHY to output a 125MHz clk from CLK_25M and set tx clock delay.This patch is similar to commit 4b6035da482cccda06aeb419634f99937c9fc783("mx6sa
tbs2910: Make Ethernet functional againConfigure the PHY to output a 125MHz clk from CLK_25M and set tx clock delay.This patch is similar to commit 4b6035da482cccda06aeb419634f99937c9fc783("mx6sabresd: Make Ethernet functional again").Signed-off-by: Soeren Moch <smoch@web.de>
treewide: replace #include <asm/errno.h> with <linux/errno.h>Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h havethe same content. (both just wrap <asm-generic/errno.h>)Replace
treewide: replace #include <asm/errno.h> with <linux/errno.h>Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h havethe same content. (both just wrap <asm-generic/errno.h>)Replace all include directives for <asm/errno.h> with <linux/errno.h>.Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>[trini: Fixup include/clk.]Signed-off-by: Tom Rini <trini@konsulko.com>
board: tbs2910: Fix eMMC BOOTCFG valueFix the BOOTCFG value for eMMC in the same way as commit 214c3f0f9921250eb336c7effadcc16158ea9df5 [imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure]did for
board: tbs2910: Fix eMMC BOOTCFG valueFix the BOOTCFG value for eMMC in the same way as commit 214c3f0f9921250eb336c7effadcc16158ea9df5 [imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure]did for sabresd.Signed-off-by: Soeren Moch <smoch@web.de>
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
board: tbs2910: Autoselect environment device when booting from SDImplement board specific functions to select the environment device andpartition when booting from SD/MMC.SD2: mmc 0 0SD3: mm
board: tbs2910: Autoselect environment device when booting from SDImplement board specific functions to select the environment device andpartition when booting from SD/MMC.SD2: mmc 0 0SD3: mmc 1 0eMMC: mmc 2 1Signed-off-by: Soeren Moch <smoch@web.de>
Use correct spelling of "U-Boot"Correct spelling of "U-Boot" shall be used in all written text(documentation, comments in source files etc.).Signed-off-by: Bin Meng <bmeng.cn@gmail.com>Reviewed
Use correct spelling of "U-Boot"Correct spelling of "U-Boot" shall be used in all written text(documentation, comments in source files etc.).Signed-off-by: Bin Meng <bmeng.cn@gmail.com>Reviewed-by: Heiko Schocher <hs@denx.de>Reviewed-by: Simon Glass <sjg@chromium.org>Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
tbs2910: remove SYS_SOC from board specific KconfigSYS_SOC is already defined in arch/arm/cpu/armv7/mx6/Kconfig, no need todefine it againSigned-off-by: Soeren Moch <smoch@web.de>
tbs2910: remove deprecated CONFIG_SYS_EXTRA_OPTIONSmove options from CONFIG_SYS_EXTRA_OPTIONS to board specific KconfigSigned-off-by: Soeren Moch <smoch@web.de>
tbs2910: support for usb otg host modeAdd support for USB OTG host mode. Only high speed devices supported so far(e.g. usb 2.0 hub required to connect a keyboard).Signed-off-by: Soeren Moch <smo
tbs2910: support for usb otg host modeAdd support for USB OTG host mode. Only high speed devices supported so far(e.g. usb 2.0 hub required to connect a keyboard).Signed-off-by: Soeren Moch <smoch@web.de>
board: tbs2910: Gate clock when switching async clock muxesAccording to the i.MX6Q Reference Manual, clocks must be gated whenswitching input clocks of async clock muxes. So use clock gates. Avoid
board: tbs2910: Gate clock when switching async clock muxesAccording to the i.MX6Q Reference Manual, clocks must be gated whenswitching input clocks of async clock muxes. So use clock gates. Avoidldb_di0_ipu clock, because there is no clock gate for this signal.There have never been any complaints about problems with the old code,but the new approach is in line with the recommendations in the manual.Signed-off-by: Soeren Moch <smoch@web.de>
tbs2910: fix Kconfigfix Kconfig for tbs2910 board to prevent crash on relocationSigned-off-by: Soeren Moch <smoch@web.de>
tbs2910: Fix error handling in board_mmc_init()When an invalid USDHC port is passed we should return -EINVAL instead of 0.Also, return the error immediately on fsl_esdhc_initialize() failure.Bas
tbs2910: Fix error handling in board_mmc_init()When an invalid USDHC port is passed we should return -EINVAL instead of 0.Also, return the error immediately on fsl_esdhc_initialize() failure.Based on similar patches by Fabio Estevam for mx6sabresd, mx53loco, wandboardSigned-off-by: Soeren Moch <smoch@web.de>Acked-by: Stefano Babic <sbabic@denx.de>
arm: mx6: add support for TBS2910 Matrix ARM miniPCAdd initial support for TBS2910 Matrix ARM miniPC.Support includes MMC, Ethernet, UARTs, HDMI, USB, SATA, PCI, I2C, RTC.Signed-off-by: Soeren M
arm: mx6: add support for TBS2910 Matrix ARM miniPCAdd initial support for TBS2910 Matrix ARM miniPC.Support includes MMC, Ethernet, UARTs, HDMI, USB, SATA, PCI, I2C, RTC.Signed-off-by: Soeren Moch <smoch@web.de>