hw/sd/aspeed_sdhci: Add AST2700 Support

Introduce a new ast2700 class to support AST2700. Add a new ast2700 SDHCI class
init function and set the value of capability register to "0x0000000719f80080"

hw/sd/aspeed_sdhci: Add AST2700 Support

Introduce a new ast2700 class to support AST2700. Add a new ast2700 SDHCI class
init function and set the value of capability register to "0x0000000719f80080".

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw:sdhci: Introduce a new "capareg" class member to set the different Capability Registers

Currently, it set the hardcode value of capability registers to all ASPEED SOCs
However, the value of capab

hw:sdhci: Introduce a new "capareg" class member to set the different Capability Registers

Currently, it set the hardcode value of capability registers to all ASPEED SOCs
However, the value of capability registers should be different for all ASPEED
SOCs. For example: the bit 28 of the Capability Register 1 should be 1 for
64-bits System Bus support for AST2700.

Introduce a new "capareg" class member whose data type is uint_64 to set the
different Capability Registers to all ASPEED SOCs.

The value of Capability Register is "0x0000000001e80080" for AST2400 and
AST2500. The value of Capability Register is "0x0000000701f80080" for AST2600.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>

show more ...

hw/sd/sdhci: Introduce a new Write Protected pin inverted property

The Write Protect pin of SDHCI model is default active low to match the SDHCI
spec. So, write enable the bit 19 should be 1 and wri

hw/sd/sdhci: Introduce a new Write Protected pin inverted property

The Write Protect pin of SDHCI model is default active low to match the SDHCI
spec. So, write enable the bit 19 should be 1 and write protected the bit 19
should be 0 at the Present State Register (0x24). However, some boards are
design Write Protected pin active high. In other words, write enable the bit 19
should be 0 and write protected the bit 19 should be 1 at the
Present State Register (0x24). To support it, introduces a new "wp-inverted"
property and set it false by default.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/sd/omap_mmc: Don't use sd_cmd_type_t

In commit 1ab08790bb75e4 we did some refactoring of the SD card
implementation, which included a rearrangement of the sd_cmd_type_t
enum values. Unfortunatel

hw/sd/omap_mmc: Don't use sd_cmd_type_t

In commit 1ab08790bb75e4 we did some refactoring of the SD card
implementation, which included a rearrangement of the sd_cmd_type_t
enum values. Unfortunately we didn't notice that this enum is not
used solely inside the SD card model itself, but is also used by the
OMAP MMC controller device. In the OMAP MMC controller, it is used
to implement the handling of the Type field of the MMC_CMD register,
so changing the enum values so that they no longer lined up with the
bit definitions for that register field broke the controller model.
The effect is that Linux fails to boot from an SD card on the "sx1"
machine.

Give omap-mmc its own enum which we can document as needing to match
the encoding used in this device's register, so it isn't sharing
sd_cmd_type_t with the SD card model any more. We can then move
sd_cmd_type_t's definition out of sd.h and into sd.c, which is the
only place that uses it.

Cc: qemu-stable@nongnu.org
Fixes: 1ab08790bb75 ("hw/sd/sdcard: Store command type in SDProto")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241017162755.710698-1-peter.maydell@linaro.org

show more ...

hw/sd/sdcard: Basis for eMMC support

Since eMMC are soldered on boards, it is not user-creatable.

RCA register is initialized to 0x0001, per spec v4.3,
chapter 8.5 "RCA register":

The default va

hw/sd/sdcard: Basis for eMMC support

Since eMMC are soldered on boards, it is not user-creatable.

RCA register is initialized to 0x0001, per spec v4.3,
chapter 8.5 "RCA register":

The default value of the RCA register is 0x0001.
The value 0x0000 is reserved to set all cards into
the Stand-by State with CMD7.

The CSD register is very similar to SD one, except
the version announced is v4.3.

eMMC CID register is slightly different from SD:
- One extra PNM (5 -> 6)
- MDT is only 1 byte (2 -> 1).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-2-philmd@linaro.org>

show more ...

hw/sd/sdcard: Introduce set_csd/set_cid handlers

In preparation of introducing eMMC support which have
different CSD/CID structures, introduce a pair of handlers
in SDCardClass.

Signed-off-by: Phil

hw/sd/sdcard: Introduce set_csd/set_cid handlers

In preparation of introducing eMMC support which have
different CSD/CID structures, introduce a pair of handlers
in SDCardClass.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-82-philmd@linaro.org>

show more ...

hw/sd/sdcard: Remove sd_none enum from sd_cmd_type_t

All handlers using the 'sd_none' enum got converted,
remove it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le

hw/sd/sdcard: Remove sd_none enum from sd_cmd_type_t

All handlers using the 'sd_none' enum got converted,
remove it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-76-philmd@linaro.org>

show more ...

hw/sd/sdcard: Store command type in SDProto

Store the command type altogether with the command handler and name.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goate

hw/sd/sdcard: Store command type in SDProto

Store the command type altogether with the command handler and name.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-41-philmd@linaro.org>

show more ...