arm64: dts: armada-3720-turris-mox: set irq type for RTC

commit fca8a117c1c9a0f8b8feed117db34cf58134dc2c upstream.

The rtc on the mox shares its interrupt line with the moxtet bus. Set
the interrup

arm64: dts: armada-3720-turris-mox: set irq type for RTC

commit fca8a117c1c9a0f8b8feed117db34cf58134dc2c upstream.

The rtc on the mox shares its interrupt line with the moxtet bus. Set
the interrupt type to be consistent between both devices. This ensures
correct setup of the interrupt line regardless of probing order.

Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Cc: <stable@vger.kernel.org> # v6.2+
Fixes: 21aad8ba615e ("arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: dts: marvell: Fix compatible strings for Armada 3720 boards

All Armada 3720 boards have Armada 3720 processor which is of Armada 3700
family and do not have Armada 3710 processor. So none of

arm64: dts: marvell: Fix compatible strings for Armada 3720 boards

All Armada 3720 boards have Armada 3720 processor which is of Armada 3700
family and do not have Armada 3710 processor. So none of them should have
compatible string for Armada 3710 processor.

Fix compatible string for all these boards by removing wrong processor
string "marvell,armada3710" and adding family string "marvell,armada3700"
as the last one. (Note that this is same way how are defined Armada 3710
DTS files).
[gclement: fix conflict for v6.2]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC

MCP7940MT-I/MNY RTC has connected interrupt line to GPIO2_5.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Si

arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC

MCP7940MT-I/MNY RTC has connected interrupt line to GPIO2_5.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

arm64: dts: armada-3720-turris-mox: Define slot-power-limit-milliwatt for PCIe

PCIe Slot Power Limit on Turris Mox is 10W.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <ka

arm64: dts: armada-3720-turris-mox: Define slot-power-limit-milliwatt for PCIe

PCIe Slot Power Limit on Turris Mox is 10W.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

arch: arm64: dts: marvell: rename the sfp GPIO properties

Rename the GPIO related sfp properties to include the preffered -gpios
suffix. Also, with this change the dtb_check will no longer complain

arch: arm64: dts: marvell: rename the sfp GPIO properties

Rename the GPIO related sfp properties to include the preffered -gpios
suffix. Also, with this change the dtb_check will no longer complain
when trying to verify the DTS against the sff,sfp.yaml binding.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

arm64: dts: marvell: armada-3720: align lednode names with dtschema

The node names should be generic and DT schema expects certain pattern
with 'led'.

Signed-off-by: Krzysztof Kozlowski <krzysztof.

arm64: dts: marvell: armada-3720: align lednode names with dtschema

The node names should be generic and DT schema expects certain pattern
with 'led'.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-12-krzysztof.kozlowski@linaro.org

show more ...

arm64: dts: marvell: align gpio-key node names with dtschema

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski

arm64: dts: marvell: align gpio-key node names with dtschema

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-11-krzysztof.kozlowski@linaro.org

show more ...

arm64: dts: armada-3720-turris-mox: Correct reg property for mdio devices

MDIO devices have #address-cells = <1>, #size-cells = <0>. Now that we
have a schema enforcing this for marvell,orion-mdio w

arm64: dts: armada-3720-turris-mox: Correct reg property for mdio devices

MDIO devices have #address-cells = <1>, #size-cells = <0>. Now that we
have a schema enforcing this for marvell,orion-mdio we can see that the
turris-mox has a unnecessary 2nd cell for the switch nodes reg property
of it's switch devices. Remove the unnecessary 2nd cell from the
switches reg property.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

arm64: dts: marvell: align SPI NOR node name with dtschema

The node names should be generic and SPI NOR dtschema expects "flash".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

arm64: dts: marvell: align SPI NOR node name with dtschema

The node names should be generic and SPI NOR dtschema expects "flash".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220407143234.295426-2-krzysztof.kozlowski@linaro.org

show more ...

arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0

Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.

Since commit 64f160e19e92 ("PCI: aardvark: Configure PCI

arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0

Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.

Since commit 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from
'ranges' DT property") kernel can set different PCIe address on CPU and
different on the bus for the one A37xx address mapping without any firmware
support in case the bus address does not conflict with other A37xx mapping.

So remap I/O space to the bus address 0x0 to enable support for old legacy
I/O port based cards which have hardcoded I/O ports in low address space.

Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O
space can be set to address 0x0 too because MEM space and I/O space are
separate and so do not conflict.

Remapping IO space on Turris Mox to different address is not possible to
due bootloader bug.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property")
Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias

U-Boot uses ethernet* aliases for setting MAC addresses. Therefore define
also alias for ethernet0.

Fixes: 7109d817db2e ("arm64: dts:

arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias

U-Boot uses ethernet* aliases for setting MAC addresses. Therefore define
also alias for ethernet0.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0

commit a1cc1697bb56cdf880ad4d17b79a39ef2c294bc9 upstream.

Legacy and old PCI I/O based cards do not support 32-bit I/O addressing

arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0

commit a1cc1697bb56cdf880ad4d17b79a39ef2c294bc9 upstream.

Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.

Since commit 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from
'ranges' DT property") kernel can set different PCIe address on CPU and
different on the bus for the one A37xx address mapping without any firmware
support in case the bus address does not conflict with other A37xx mapping.

So remap I/O space to the bus address 0x0 to enable support for old legacy
I/O port based cards which have hardcoded I/O ports in low address space.

Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O
space can be set to address 0x0 too because MEM space and I/O space are
separate and so do not conflict.

Remapping IO space on Turris Mox to different address is not possible to
due bootloader bug.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property")
Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias

[ Upstream commit a0e897d1b36793fe0ab899f2fe93dff25c82f418 ]

U-Boot uses ethernet* aliases for setting MAC addresses. Therefore defin

arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias

[ Upstream commit a0e897d1b36793fe0ab899f2fe93dff25c82f418 ]

U-Boot uses ethernet* aliases for setting MAC addresses. Therefore define
also alias for ethernet0.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Tru

arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted
Firmware for Armada 3700 platform already assigns 128 MB for PCIe window,
so extend PCIe MEM space to the end of 128 MB PCIe window which allows to
allocate more PCIe BARs for more PCIe cards.

Without this change some combination of PCIe cards cannot be used and
kernel show error messages in dmesg during initialization:

pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000]
pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000]
pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref]
pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000]
pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000]
pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000]
pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000]
pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000]
pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000]
pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit]
pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit]

Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox
kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot
crashes during loading of kernel DTB file. This bug is present only in
U-Boot code for Turris Mox and therefore other Armada 3700 devices are not
affected by this bug. Bug is fixed in U-Boot version 2021.07.

To not break booting new kernels on existing versions of U-Boot on Turris
Mox, use first 16 MB range for IO and second range with rest of PCIe window
for MEM.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode

Some SFP modules are not detected when i2c-fast-mode is enabled even when
clock-frequency is already set to 100000. The I2C bus violates

arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode

Some SFP modules are not detected when i2c-fast-mode is enabled even when
clock-frequency is already set to 100000. The I2C bus violates the timing
specifications when run in fast mode. So disable fast mode on Turris Mox.

Same change was already applied for uDPU (also Armada 3720 board with SFP)
in commit fe3ec631a77d ("arm64: dts: uDPU: remove i2c-fast-mode").

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers

Since drivers/mmc/host/sdhci-xenon.c declares the PROBE_PREFER_ASYNCHRONOUS
probe type, it is not guaranteed whether /dev/m

arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers

Since drivers/mmc/host/sdhci-xenon.c declares the PROBE_PREFER_ASYNCHRONOUS
probe type, it is not guaranteed whether /dev/mmcblk0 will belong to
sdhci0 or sdhci1. In turn, this will break booting by:

root=/dev/mmcblk0p1

Fix the issue by adding aliases so that the old MMC controller indices
are preserved.

Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file

Move the turris-mox-rwtm firmware node from Turris MOX' device tree into
the generic armada-37xx.dtsi file and use the gener

arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file

Move the turris-mox-rwtm firmware node from Turris MOX' device tree into
the generic armada-37xx.dtsi file and use the generic compatible string
'marvell,armada-3700-rwtm-firmware' instead of the current one.

Turris MOX DTS file contains also old compatible string for backward
compatibility.

The Turris MOX rWTM firmware can be used on any Armada 37xx device,
giving them access to the rWTM hardware random number generator, which
is otherwise unavailable.

This change allows Linux to load the turris-mox-rwtm.ko module on these
boards.

Tested on ESPRESSObin v5 with both default Marvell WTMI firmware and
CZ.NIC's firmware. With default WTMI firmware the turris-mox-rwtm fails
to probe, while with CZ.NIC's firmware it registers the HW random number
generator.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

treewide: change my e-mail address, fix my name

Change my e-mail address to kabel@kernel.org, and fix my name in
non-code parts (add diacritical mark).

Link: https://lkml.kernel.org/r/2021032517112

treewide: change my e-mail address, fix my name

Change my e-mail address to kabel@kernel.org, and fix my name in
non-code parts (add diacritical mark).

Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

arm64: dts: armada-3720-turris-mox: rename u-boot mtd partition to a53-firmware

The partition called "u-boot" in reality contains TF-A and U-Boot, and
TF-A is before U-Boot.

Rename this parition to

arm64: dts: armada-3720-turris-mox: rename u-boot mtd partition to a53-firmware

The partition called "u-boot" in reality contains TF-A and U-Boot, and
TF-A is before U-Boot.

Rename this parition to "a53-firmware" to avoid confusion for users,
since they cannot simply build U-Boot from U-Boot repository and flash
the resulting image there. Instead they have to build the firmware with
the sources from the mox-boot-builder repository [1] and flash the
a53-firmware.bin binary there.

[1] https://gitlab.nic.cz/turris/mox-boot-builder

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

arm64: dts: armada-3720-turris-mox: add 3W power capability to SFP cage

Add maximum-power-milliwatt = 3000 to SFP node of Turris MOX.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db

arm64: dts: armada-3720-turris-mox: add 3W power capability to SFP cage

Add maximum-power-milliwatt = 3000 to SFP node of Turris MOX.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

arm64: dts: armada-3720-turris-mox: update ethernet-phy handle name

Use property name `phy-handle` instead of the deprecated `phy` to
connect eth2 to the PHY.

Signed-off-by: Marek Behún <kabel@kern

arm64: dts: armada-3720-turris-mox: update ethernet-phy handle name

Use property name `phy-handle` instead of the deprecated `phy` to
connect eth2 to the PHY.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

[ Upstream commit 514ef1e62d6521c2199d192b1c71b79d2aa21d5a ]

Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe

arm64: dts: marvell: armada-37xx: Extend PCIe MEM space

[ Upstream commit 514ef1e62d6521c2199d192b1c71b79d2aa21d5a ]

Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted
Firmware for Armada 3700 platform already assigns 128 MB for PCIe window,
so extend PCIe MEM space to the end of 128 MB PCIe window which allows to
allocate more PCIe BARs for more PCIe cards.

Without this change some combination of PCIe cards cannot be used and
kernel show error messages in dmesg during initialization:

pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000]
pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000]
pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref]
pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000]
pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000]
pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000]
pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000]
pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000]
pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000]
pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit]
pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit]

Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox
kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot
crashes during loading of kernel DTB file. This bug is present only in
U-Boot code for Turris Mox and therefore other Armada 3700 devices are not
affected by this bug. Bug is fixed in U-Boot version 2021.07.

To not break booting new kernels on existing versions of U-Boot on Turris
Mox, use first 16 MB range for IO and second range with rest of PCIe window
for MEM.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode

[ Upstream commit ee7ab3f263f8131722cff3871b9618b1e7478f07 ]

Some SFP modules are not detected when i2c-fast-mode is enabled even when

arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode

[ Upstream commit ee7ab3f263f8131722cff3871b9618b1e7478f07 ]

Some SFP modules are not detected when i2c-fast-mode is enabled even when
clock-frequency is already set to 100000. The I2C bus violates the timing
specifications when run in fast mode. So disable fast mode on Turris Mox.

Same change was already applied for uDPU (also Armada 3720 board with SFP)
in commit fe3ec631a77d ("arm64: dts: uDPU: remove i2c-fast-mode").

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers

[ Upstream commit 923f98929182dfd04e9149be839160b63a3db145 ]

Since drivers/mmc/host/sdhci-xenon.c declares the PROBE_PREFE

arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers

[ Upstream commit 923f98929182dfd04e9149be839160b63a3db145 ]

Since drivers/mmc/host/sdhci-xenon.c declares the PROBE_PREFER_ASYNCHRONOUS
probe type, it is not guaranteed whether /dev/mmcblk0 will belong to
sdhci0 or sdhci1. In turn, this will break booting by:

root=/dev/mmcblk0p1

Fix the issue by adding aliases so that the old MMC controller indices
are preserved.

Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file

[ Upstream commit 3a52a48973b355b3aac5add92ef50650ae37c2bd ]

Move the turris-mox-rwtm firmware node from Turris MOX' device

arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file

[ Upstream commit 3a52a48973b355b3aac5add92ef50650ae37c2bd ]

Move the turris-mox-rwtm firmware node from Turris MOX' device tree into
the generic armada-37xx.dtsi file and use the generic compatible string
'marvell,armada-3700-rwtm-firmware' instead of the current one.

Turris MOX DTS file contains also old compatible string for backward
compatibility.

The Turris MOX rWTM firmware can be used on any Armada 37xx device,
giving them access to the rWTM hardware random number generator, which
is otherwise unavailable.

This change allows Linux to load the turris-mox-rwtm.ko module on these
boards.

Tested on ESPRESSObin v5 with both default Marvell WTMI firmware and
CZ.NIC's firmware. With default WTMI firmware the turris-mox-rwtm fails
to probe, while with CZ.NIC's firmware it registers the HW random number
generator.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...