i2c: pm_smbus: Add block transfer capability

There was no block transfer code in pm_smbus.c, and it is needed
for some devices. So add it.

This adds both byte-by-byte block transfers and buffered

i2c: pm_smbus: Add block transfer capability

There was no block transfer code in pm_smbus.c, and it is needed
for some devices. So add it.

This adds both byte-by-byte block transfers and buffered block
transfers.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-5-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

i2c: pm_smbus: Fix the semantics of block I2C transfers

The I2C block transfer commands was not implemented correctly, it
read a length byte and such like it was an smbus transfer.

So fix the smbus

i2c: pm_smbus: Fix the semantics of block I2C transfers

The I2C block transfer commands was not implemented correctly, it
read a length byte and such like it was an smbus transfer.

So fix the smbus_read_block() and smbus_write_block() functions
so they can properly handle I2C transfers, and normal SMBus
transfers (for upcoming changes). Pass in a transfer size and
a bool to know whether to use the size byte (like SMBus) or use
the length given (like I2C).

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-3-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

ppc4xx_i2c: Rewrite to model hardware more closely

Rewrite to make it closer to how real device works so that guest OS
drivers can access I2C devices. Previously this was only a hack to
allow U-Boot

ppc4xx_i2c: Rewrite to model hardware more closely

Rewrite to make it closer to how real device works so that guest OS
drivers can access I2C devices. Previously this was only a hack to
allow U-Boot to get past accessing SPD EEPROMs but to support other
I2C devices and allow guests to access them we need to model real
device more properly.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

ppc4xx_i2c: Implement directcntl register

As well as being able to generate its own i2c transactions, the ppc4xx
i2c controller has a DIRECTCNTL register which allows explicit control
of the i2c lin

ppc4xx_i2c: Implement directcntl register

As well as being able to generate its own i2c transactions, the ppc4xx
i2c controller has a DIRECTCNTL register which allows explicit control
of the i2c lines.

Using this register an OS can directly bitbang i2c operations. In
order to let emulated i2c devices respond to this, we need to wire up
the DIRECTCNTL register to qemu's bitbanged i2c handling code.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

ppc4xx_i2c: Remove unimplemented sdata and intr registers

We don't emulate slave mode so related registers are not needed.
[lh]sadr are only retained to avoid too many warnings and simplify
debuggin

ppc4xx_i2c: Remove unimplemented sdata and intr registers

We don't emulate slave mode so related registers are not needed.
[lh]sadr are only retained to avoid too many warnings and simplify
debugging but sdata is not even correct because device has a 4 byte
FIFO instead so just remove this unimplemented register for now.

The intr register is also not implemented correctly, it is for
diagnostics and normally not even visible on device without explicitly
enabling it. As no guests are known to need this remove it as well.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

smbus: add a smbus_eeprom_init_one() routine

This is an helper routine to add a single EEPROM on an I2C bus. It can
be directly used by smbus_eeprom_init() which adds a certain number of
EEPROMs on

smbus: add a smbus_eeprom_init_one() routine

This is an helper routine to add a single EEPROM on an I2C bus. It can
be directly used by smbus_eeprom_init() which adds a certain number of
EEPROMs on mips and x86 machines.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530064049.27976-5-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init

I2CSlaveClass::init is no more used, remove it.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180419212727.2

hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init

I2CSlaveClass::init is no more used, remove it.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180419212727.26095-3-f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180528144509.15812-3-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init

SMBusDeviceClass::init is no more used, remove it.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <2018

hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init

SMBusDeviceClass::init is no more used, remove it.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180419212727.26095-2-f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180528144509.15812-2-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

i2c: Move the bus class to i2c.h

Some devices need access to it.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Wallei

i2c: Move the bus class to i2c.h

Some devices need access to it.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message-id: 20180227104903.21353-3-linus.walleij@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

i2c: Fix some brace style issues

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Mess

i2c: Fix some brace style issues

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message-id: 20180227104903.21353-2-linus.walleij@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...