/openbmc/linux/Documentation/devicetree/bindings/nvmem/ |
H A D | fsl,layerscape-sfp.yaml | 30 maxItems: 1 33 maxItems: 1 56 efuse@1e80000 {
|
/openbmc/linux/Documentation/devicetree/bindings/phy/ |
H A D | mediatek,pcie-phy.yaml | 20 maxItems: 1 46 maxItems: 1 58 phy@11e80000 {
|
/openbmc/linux/Documentation/devicetree/bindings/ufs/ |
H A D | ti,j721e-ufs.yaml | 18 maxItems: 1 22 maxItems: 1 26 maxItems: 1 29 maxItems: 1 32 maxItems: 1 66 ufs-wrapper@4e80000 { 70 clocks = <&k3_clks 277 1>; 71 assigned-clocks = <&k3_clks 277 1>; 84 clocks = <&k3_clks 277 1>; 85 assigned-clocks = <&k3_clks 277 1>;
|
/openbmc/linux/Documentation/devicetree/bindings/iommu/ |
H A D | samsung,sysmmu.yaml | 33 for window 1, 2 and 3. 45 maxItems: 1 48 maxItems: 1 51 minItems: 1 73 maxItems: 1 89 sysmmu_gsc0: iommu@13e80000 {
|
/openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | qcom,sm8550-lpass-lpi-pinctrl.yaml | 44 maxItems: 1 69 pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" 91 enum: [0, 1, 2, 3] 95 1: Higher Slew rate (faster edges) 131 lpass_tlmm: pinctrl@6e80000 {
|
/openbmc/linux/arch/arm64/boot/dts/allwinner/ |
H A D | sun50i-h5.dtsi | 10 #address-cells = <1>; 23 cpu1: cpu@1 { 26 reg = <1>; 82 syscon: system-control@1c00000 { 85 #address-cells = <1>; 86 #size-cells = <1>; 92 #address-cells = <1>; 93 #size-cells = <1>; 104 video-codec@1c0e000 { 112 allwinner,sram = <&ve_sram 1>; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/synaptics/ |
H A D | berlin4ct.dtsi | 26 #address-cells = <1>; 38 cpu1: cpu@1 { 112 #address-cells = <1>; 113 #size-cells = <1>; 127 apb@e80000 { 129 #address-cells = <1>; 130 #size-cells = <1>; 138 #address-cells = <1>; 156 #address-cells = <1>; 159 portb: gpio-port@1 { [all …]
|
/openbmc/linux/arch/arm/boot/dts/broadcom/ |
H A D | bcm23550.dtsi | 39 #address-cells = <1>; 40 #size-cells = <1>; 46 #address-cells = <1>; 56 cpu1: cpu@1 { 61 reg = <1>; 88 #address-cells = <1>; 89 #size-cells = <1>; 93 reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */ 126 #address-cells = <1>; 127 #size-cells = <1>; [all …]
|
/openbmc/linux/drivers/bus/ |
H A D | intel-ixp4xx-eb.c | 58 #define IXP4XX_EXP_WR_EN BIT(1) 124 .max = 1, 129 .max = 1, 134 .max = 1, 139 .max = 1, 144 .max = 1, 149 .max = 1, 219 if (ip->max == 1) { in ixp4xx_exp_setup_chipselect() 278 cs_index + 1, in ixp4xx_exp_setup_chipselect() 309 i * IXP4XX_OF_REG_SIZE + 1, &rbase); in ixp4xx_exp_setup_child() [all …]
|
/openbmc/linux/arch/arm/boot/dts/synaptics/ |
H A D | berlin2.dtsi | 17 #address-cells = <1>; 18 #size-cells = <1>; 27 #address-cells = <1>; 48 cpu@1 { 52 reg = <1>; 74 #address-cells = <1>; 75 #size-cells = <1>; 142 #address-cells = <1>; 165 #address-cells = <1>; 176 apb@e80000 { [all …]
|
H A D | berlin2cd.dtsi | 17 #address-cells = <1>; 18 #size-cells = <1>; 26 #address-cells = <1>; 59 #address-cells = <1>; 60 #size-cells = <1>; 96 interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; 103 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; 110 interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; 137 #address-cells = <1>; 155 #address-cells = <1>; [all …]
|
H A D | berlin2q.dtsi | 12 #address-cells = <1>; 13 #size-cells = <1>; 21 #address-cells = <1>; 43 cpu1: cpu@1 { 47 reg = <1>; 119 #address-cells = <1>; 120 #size-cells = <1>; 221 #address-cells = <1>; 237 apb@e80000 { 239 #address-cells = <1>; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/freescale/ |
H A D | fsl-ls1012a.dtsi | 31 #address-cells = <1>; 77 interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ 78 <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ 79 <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ 80 <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ 96 interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>; 145 #address-cells = <1>; 153 QORIQ_CLK_PLL_DIV(1)>, 155 QORIQ_CLK_PLL_DIV(1)>; 164 QORIQ_CLK_PLL_DIV(1)>; [all …]
|
H A D | fsl-ls1046a.dtsi | 37 #address-cells = <1>; 50 cpu1: cpu@1 { 148 thermal-sensors = <&tmu 1>; 297 #address-cells = <1>; 315 clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; 326 #address-cells = <1>; 327 #size-cells = <1>; 330 extirq: interrupt-controller@1ac { 338 <1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, 357 #address-cells = <1>; [all …]
|
H A D | fsl-ls1043a.dtsi | 36 #address-cells = <1>; 55 cpu1: cpu@1 { 112 /* DRAM space 1, size: 2GiB DRAM */ 180 thermal-sensors = <&tmu 1>; 271 interrupts = <1 13 0xf08>, /* Physical Secure PPI */ 272 <1 14 0xf08>, /* Physical Non-Secure PPI */ 273 <1 11 0xf08>, /* Virtual PPI */ 274 <1 10 0xf08>; /* Hypervisor PPI */ 298 interrupts = <1 9 0xf08>; 309 clockgen: clocking@1ee1000 { [all …]
|
H A D | fsl-ls1088a.dtsi | 26 #address-cells = <1>; 39 cpu1: cpu@1 { 70 clocks = <&clockgen QORIQ_CLK_CMUX 1>; 79 clocks = <&clockgen QORIQ_CLK_CMUX 1>; 88 clocks = <&clockgen QORIQ_CLK_CMUX 1>; 97 clocks = <&clockgen QORIQ_CLK_CMUX 1>; 121 interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>; 172 thermal-sensors = <&tmu 1>; 186 interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ 187 <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ [all …]
|
H A D | fsl-ls208xa.dtsi | 32 #address-cells = <1>; 39 /* DRAM space - 1, size : 2 GB DRAM */ 61 interrupts = <1 9 0x4>; 70 rstcr: syscon@1e60000 { 86 thermal-sensors = <&tmu 1>; 244 interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ 245 <1 14 4>, /* Physical Non-Secure PPI, active-low */ 246 <1 11 4>, /* Virtual PPI, active-low */ 247 <1 10 4>; /* Hypervisor PPI, active-low */ 252 interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ [all …]
|
H A D | fsl-ls1028a.dtsi | 22 #address-cells = <1>; 42 cpu1: cpu@1 { 181 thermal-sensors = <&tmu 1>; 221 dcfg: syscon@1e00000 { 222 #address-cells = <1>; 223 #size-cells = <1>; 238 rst: syscon@1e60000 { 244 sfp: efuse@1e80000 { 250 #address-cells = <1>; 251 #size-cells = <1>; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-am65-iot2050-common.dtsi | 201 /* (AC3) WKUP_GPIO0_4, used as uart0 mode 1 */ 299 AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ 300 AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */ 301 AM65X_IOPAD(0x0008, PIN_OUTPUT, 1) /* VOUT1_DATA2 */ 302 AM65X_IOPAD(0x000c, PIN_OUTPUT, 1) /* VOUT1_DATA3 */ 303 AM65X_IOPAD(0x0010, PIN_OUTPUT, 1) /* VOUT1_DATA4 */ 304 AM65X_IOPAD(0x0014, PIN_OUTPUT, 1) /* VOUT1_DATA5 */ 305 AM65X_IOPAD(0x0018, PIN_OUTPUT, 1) /* VOUT1_DATA6 */ 306 AM65X_IOPAD(0x001c, PIN_OUTPUT, 1) /* VOUT1_DATA7 */ 307 AM65X_IOPAD(0x0020, PIN_OUTPUT, 1) /* VOUT1_DATA8 */ [all …]
|
/openbmc/linux/arch/arm/boot/dts/qcom/ |
H A D | qcom-ipq4019.dtsi | 13 #address-cells = <1>; 14 #size-cells = <1>; 30 tz@87e80000 { 44 #address-cells = <1>; 60 cpu@1 { 165 interrupts = <1 2 0xf08>, 166 <1 3 0xf08>, 167 <1 4 0xf08>, 168 <1 1 0xf08>; 174 #address-cells = <1>; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/qcom/ |
H A D | msm8994-msft-lumia-octagon.dtsi | 68 linux,input-type = <1>; 77 linux,input-type = <1>; 86 linux,input-type = <1>; 222 qcom,client-id = <1>; 229 mba_mem: memory@6e80000 { 278 #address-cells = <1>; 284 rmi4-f01@1 { 286 syna,nosleep-mode = <1>; 291 syna,sensor-type = <1>; 385 pinctrl-1 = <&grip_sleep>; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/mediatek/ |
H A D | mt8195-cherry.dtsi | 156 io-channels = <&auxadc 1>; 220 adsp_device_mem: memory@60e80000 { 313 #address-cells = <1>; 323 port@1 { 324 reg = <1>; 326 data-lanes = <0 1 2 3>; 346 #address-cells = <1>; 356 port@1 { 357 reg = <1>; 359 data-lanes = <0 1 2 3>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/ls/ |
H A D | ls1021a.dtsi | 30 #address-cells = <1>; 37 clocks = <&clockgen 1 0>; 45 clocks = <&clockgen 1 0>; 132 sfp: efuse@1e80000 { 139 dcfg: dcfg@1ee0000 { 147 #address-cells = <1>; 154 clocks = <&clockgen 4 1>, <&clockgen 4 1>; 176 clocks = <&clockgen 4 1>; 185 #address-cells = <1>; 186 #size-cells = <1>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/samsung/ |
H A D | exynos5250.dtsi | 46 #address-cells = <1>; 69 cpu1: cpu@1 { 72 reg = <1>; 170 interrupts = <1 2>, <22 4>; 177 #address-cells = <1>; 178 #size-cells = <1>; 230 #clock-cells = <1>; 236 #clock-cells = <1>; 293 #clock-cells = <1>; 305 #phy-cells = <1>; [all …]
|
H A D | exynos5420.dtsi | 219 cluster_a7_opp_table: opp-table-1 { 268 #address-cells = <1>; 269 #size-cells = <1>; 288 #clock-cells = <1>; 294 #clock-cells = <1>; 315 #address-cells = <1>; 327 #address-cells = <1>; 339 #address-cells = <1>; 425 ppmu_event3_dmc0_1: ppmu-event3-dmc0-1 { 426 event-name = "ppmu-event3-dmc0-1"; [all …]
|