1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SM8550 SoC LPASS LPI TLMM
8
9maintainers:
10  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
11  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
12
13description:
14  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
15  (LPASS) Low Power Island (LPI) of Qualcomm SM8550 SoC.
16
17properties:
18  compatible:
19    const: qcom,sm8550-lpass-lpi-pinctrl
20
21  reg:
22    items:
23      - description: LPASS LPI TLMM Control and Status registers
24      - description: LPASS LPI MCC registers
25
26  clocks:
27    items:
28      - description: LPASS Core voting clock
29      - description: LPASS Audio voting clock
30
31  clock-names:
32    items:
33      - const: core
34      - const: audio
35
36  gpio-controller: true
37
38  "#gpio-cells":
39    description: Specifying the pin number and flags, as defined in
40      include/dt-bindings/gpio/gpio.h
41    const: 2
42
43  gpio-ranges:
44    maxItems: 1
45
46patternProperties:
47  "-state$":
48    oneOf:
49      - $ref: "#/$defs/qcom-sm8550-lpass-state"
50      - patternProperties:
51          "-pins$":
52            $ref: "#/$defs/qcom-sm8550-lpass-state"
53        additionalProperties: false
54
55$defs:
56  qcom-sm8550-lpass-state:
57    type: object
58    description:
59      Pinctrl node's client devices use subnodes for desired pin configuration.
60      Client device subnodes use below standard properties.
61    $ref: /schemas/pinctrl/pincfg-node.yaml
62
63    properties:
64      pins:
65        description:
66          List of gpio pins affected by the properties specified in this
67          subnode.
68        items:
69          pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
70
71      function:
72        enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
73                dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
74                ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
75                i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
76                i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
77                i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk,
78                swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk,
79                wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
80        description:
81          Specify the alternative function to be configured for the specified
82          pins.
83
84      drive-strength:
85        enum: [2, 4, 6, 8, 10, 12, 14, 16]
86        default: 2
87        description:
88          Selects the drive strength for the specified pins, in mA.
89
90      slew-rate:
91        enum: [0, 1, 2, 3]
92        default: 0
93        description: |
94          0: No adjustments
95          1: Higher Slew rate (faster edges)
96          2: Lower Slew rate (slower edges)
97          3: Reserved (No adjustments)
98
99      bias-bus-hold: true
100      bias-pull-down: true
101      bias-pull-up: true
102      bias-disable: true
103      input-enable: true
104      output-high: true
105      output-low: true
106
107    required:
108      - pins
109      - function
110
111    additionalProperties: false
112
113allOf:
114  - $ref: pinctrl.yaml#
115
116required:
117  - compatible
118  - reg
119  - clocks
120  - clock-names
121  - gpio-controller
122  - "#gpio-cells"
123  - gpio-ranges
124
125additionalProperties: false
126
127examples:
128  - |
129    #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
130
131    lpass_tlmm: pinctrl@6e80000 {
132        compatible = "qcom,sm8550-lpass-lpi-pinctrl";
133        reg = <0x06e80000 0x20000>,
134              <0x0725a000 0x10000>;
135
136        clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
137                 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
138        clock-names = "core", "audio";
139
140        gpio-controller;
141        #gpio-cells = <2>;
142        gpio-ranges = <&lpass_tlmm 0 0 23>;
143
144        tx-swr-sleep-clk-state {
145            pins = "gpio0";
146            function = "swr_tx_clk";
147            drive-strength = <2>;
148            bias-pull-down;
149        };
150    };
151