/openbmc/u-boot/include/configs/ |
H A D | MCR3000.h | 13 "sdram_type=SDRAM\0" \ 14 "flash_type=AM29LV160DB\0" \ 15 "loadaddr=0x400000\0" \ 16 "filename=uImage.lzma\0" \ 17 "nfsroot=/opt/ofs\0" \ 18 "dhcp_ip=ip=:::::eth0:dhcp\0" \ 19 "console_args=console=ttyCPM0,115200N8\0" \ 25 "bootm 0x04060000 - 0x04050000\0" \ 32 "tftp 0xf00000 mcr3000.dtb;" \ 33 "bootm ${loadaddr} - 0xf00000\0" \ [all …]
|
/openbmc/linux/drivers/char/agp/ |
H A D | intel-agp.h | 9 #define INTEL_APSIZE 0xb4 10 #define INTEL_ATTBASE 0xb8 11 #define INTEL_AGPCTRL 0xb0 12 #define INTEL_NBXCFG 0x50 13 #define INTEL_ERRSTS 0x91 16 #define I830_GMCH_CTRL 0x52 17 #define I830_GMCH_ENABLED 0x4 18 #define I830_GMCH_MEM_MASK 0x1 19 #define I830_GMCH_MEM_64M 0x1 20 #define I830_GMCH_MEM_128M 0 [all …]
|
/openbmc/linux/drivers/net/wireless/quantenna/qtnfmac/pcie/ |
H A D | pearl_pcie_regs.h | 8 #define PCIE_HDP_CTRL(base) ((base) + 0x2c00) 9 #define PCIE_HDP_AXI_CTRL(base) ((base) + 0x2c04) 10 #define PCIE_HDP_HOST_WR_DESC0(base) ((base) + 0x2c10) 11 #define PCIE_HDP_HOST_WR_DESC0_H(base) ((base) + 0x2c14) 12 #define PCIE_HDP_HOST_WR_DESC1(base) ((base) + 0x2c18) 13 #define PCIE_HDP_HOST_WR_DESC1_H(base) ((base) + 0x2c1c) 14 #define PCIE_HDP_HOST_WR_DESC2(base) ((base) + 0x2c20) 15 #define PCIE_HDP_HOST_WR_DESC2_H(base) ((base) + 0x2c24) 16 #define PCIE_HDP_HOST_WR_DESC3(base) ((base) + 0x2c28) 17 #define PCIE_HDP_HOST_WR_DESC4_H(base) ((base) + 0x2c2c) [all …]
|
/openbmc/linux/sound/soc/codecs/ |
H A D | rt5514.h | 15 #define RT5514_DEVICE_ID 0x10ec5514 17 #define RT5514_RESET 0x2000 18 #define RT5514_PWR_ANA1 0x2004 19 #define RT5514_PWR_ANA2 0x2008 20 #define RT5514_I2S_CTRL1 0x2010 21 #define RT5514_I2S_CTRL2 0x2014 22 #define RT5514_VAD_CTRL6 0x2030 23 #define RT5514_EXT_VAD_CTRL 0x206c 24 #define RT5514_DIG_IO_CTRL 0x2070 25 #define RT5514_PAD_CTRL1 0x2080 [all …]
|
/openbmc/linux/arch/arm/boot/dts/sunplus/ |
H A D | sunplus-sp7021.dtsi | 23 #clock-cells = <0>; 33 ranges = <0 0x9c000000 0x400000>; 38 reg = <0x4 0x28>, 39 <0x200 0x44>, 40 <0x268 0x04>; 47 reg = <0x780 0x80>, <0xa80 0x80>; 54 reg = <0xaf00 0x34>, <0xaf80 0x58>; 62 reg = <0x14 0x3>; 65 reg = <0x18 0x2>; 68 reg = <0x34 0x6>; [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/usb/ |
H A D | mediatek,mtu3.yaml | 203 "^usb@[0-9a-f]+$": 237 reg = <0x11271000 0x3000>, <0x11280700 0x0100>; 249 mediatek,syscon-wakeup = <&pericfg 0x400 1>; 256 reg = <0x11270000 0x1000>; 273 reg = <0x112c1000 0x3000>, <0x112d0700 0x0100>; 288 reg = <0x11270000 0x1000>; 308 reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>; 314 mediatek,syscon-wakeup = <&pericfg 0x400 1>; 325 reg = <0x11200000 0x1000>;
|
/openbmc/linux/drivers/phy/lantiq/ |
H A D | phy-lantiq-vrx200-pcie.c | 29 #define PCIE_PHY_PLL_CTRL1 0x44 31 #define PCIE_PHY_PLL_CTRL2 0x46 32 #define PCIE_PHY_PLL_CTRL2_CONST_SDM_MASK GENMASK(7, 0) 36 #define PCIE_PHY_PLL_CTRL3 0x48 40 #define PCIE_PHY_PLL_CTRL4 0x4a 41 #define PCIE_PHY_PLL_CTRL5 0x4c 42 #define PCIE_PHY_PLL_CTRL6 0x4e 43 #define PCIE_PHY_PLL_CTRL7 0x50 44 #define PCIE_PHY_PLL_A_CTRL1 0x52 46 #define PCIE_PHY_PLL_A_CTRL2 0x54 [all …]
|
/openbmc/linux/drivers/bus/ |
H A D | omap_l3_noc.h | 16 #define CUSTOM_ERROR 0x2 17 #define STANDARD_ERROR 0x0 18 #define INBAND_ERROR 0x0 19 #define L3_APPLICATION_ERROR 0x0 20 #define L3_DEBUG_ERROR 0x1 23 #define L3_TARG_STDERRLOG_MAIN 0x48 24 #define L3_TARG_STDERRLOG_HDR 0x4c 25 #define L3_TARG_STDERRLOG_MSTADDR 0x50 26 #define L3_TARG_STDERRLOG_INFO 0x58 27 #define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c [all …]
|
/openbmc/linux/drivers/net/wireless/mediatek/mt7601u/ |
H A D | regs.h | 12 #define MT_ASIC_VERSION 0x0000 14 #define MT76XX_REV_E3 0x22 15 #define MT76XX_REV_E4 0x33 17 #define MT_CMB_CTRL 0x0020 21 #define MT_EFUSE_CTRL 0x0024 22 #define MT_EFUSE_CTRL_AOUT GENMASK(5, 0) 30 #define MT_EFUSE_DATA_BASE 0x0028 33 #define MT_COEXCFG0 0x0040 34 #define MT_COEXCFG0_COEX_EN BIT(0) 36 #define MT_WLAN_FUN_CTRL 0x0080 [all …]
|
/openbmc/u-boot/drivers/video/meson/ |
H A D | meson_vpu_init.c | 14 #define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */ 15 #define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */ 16 #define HHI_HDMI_PHY_CNTL0 0x3a0 /* 0xe8 offset in data sheet */ 28 0x15561500, 0x14561600, 0x13561700, 0x12561800, 29 0x11551a00, 0x11541b00, 0x10541c00, 0x0f541d00, 30 0x0f531e00, 0x0e531f00, 0x0d522100, 0x0c522200, 31 0x0b522300, 0x0b512400, 0x0a502600, 0x0a4f2700, 32 0x094e2900, 0x084e2a00, 0x084d2b00, 0x074c2c01, 33 0x074b2d01, 0x064a2f01, 0x06493001, 0x05483201, 34 0x05473301, 0x05463401, 0x04453601, 0x04433702, [all …]
|
/openbmc/linux/drivers/clk/imx/ |
H A D | clk-imx93.c | 58 { IMX93_CLK_A55_PERIPH, "a55_periph_root", 0x0000, FAST_SEL, CLK_IS_CRITICAL }, 59 { IMX93_CLK_A55_MTR_BUS, "a55_mtr_bus_root", 0x0080, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL }, 60 { IMX93_CLK_A55, "a55_alt_root", 0x0100, FAST_SEL, CLK_IS_CRITICAL }, 61 { IMX93_CLK_M33, "m33_root", 0x0180, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL }, 62 { IMX93_CLK_BUS_WAKEUP, "bus_wakeup_root", 0x0280, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL }, 63 { IMX93_CLK_BUS_AON, "bus_aon_root", 0x0300, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL }, 64 { IMX93_CLK_WAKEUP_AXI, "wakeup_axi_root", 0x0380, FAST_SEL, CLK_IS_CRITICAL }, 65 { IMX93_CLK_SWO_TRACE, "swo_trace_root", 0x0400, LOW_SPEED_IO_SEL, }, 66 { IMX93_CLK_M33_SYSTICK, "m33_systick_root", 0x0480, LOW_SPEED_IO_SEL, }, 67 { IMX93_CLK_FLEXIO1, "flexio1_root", 0x0500, LOW_SPEED_IO_SEL, }, [all …]
|
/openbmc/linux/drivers/net/ethernet/amd/ |
H A D | ariadne.h | 17 * Publication #16907, Rev. B, Amendment/0, May 1994 62 #define CSR0 0x0000 /* - PCnet-ISA Controller Status */ 63 #define CSR1 0x0100 /* - IADR[15:0] */ 64 #define CSR2 0x0200 /* - IADR[23:16] */ 65 #define CSR3 0x0300 /* - Interrupt Masks and Deferral Control */ 66 #define CSR4 0x0400 /* - Test and Features Control */ 67 #define CSR6 0x0600 /* RCV/XMT Descriptor Table Length */ 68 #define CSR8 0x0800 /* - Logical Address Filter, LADRF[15:0] */ 69 #define CSR9 0x0900 /* - Logical Address Filter, LADRF[31:16] */ 70 #define CSR10 0x0a00 /* - Logical Address Filter, LADRF[47:32] */ [all …]
|
/openbmc/linux/drivers/gpu/drm/meson/ |
H A D | meson_viu.c | 46 VIU_MATRIX_OSD_EOTF = 0, 51 VIU_LUT_OSD_EOTF = 0, 63 0, 0, 0, /* pre offset */ 67 0, 0, 0, /* 10'/11'/12' */ 68 0, 0, 0, /* 20'/21'/22' */ 70 0, 0, 0 /* mode, right_shift, clip_en */ 85 writel(((m[0] & 0xfff) << 16) | (m[1] & 0xfff), in meson_viu_set_g12a_osd1_matrix() 87 writel(m[2] & 0xfff, in meson_viu_set_g12a_osd1_matrix() 89 writel(((m[3] & 0x1fff) << 16) | (m[4] & 0x1fff), in meson_viu_set_g12a_osd1_matrix() 91 writel(((m[5] & 0x1fff) << 16) | (m[6] & 0x1fff), in meson_viu_set_g12a_osd1_matrix() [all …]
|
/openbmc/linux/drivers/net/wireless/mediatek/mt76/ |
H A D | mt76x02_regs.h | 9 #define MT_ASIC_VERSION 0x0000 11 #define MT76XX_REV_E3 0x22 12 #define MT76XX_REV_E4 0x33 14 #define MT_CMB_CTRL 0x0020 18 #define MT_EFUSE_CTRL 0x0024 19 #define MT_EFUSE_CTRL_AOUT GENMASK(5, 0) 27 #define MT_EFUSE_DATA_BASE 0x0028 30 #define MT_COEXCFG0 0x0040 31 #define MT_COEXCFG0_COEX_EN BIT(0) 33 #define MT_WLAN_FUN_CTRL 0x0080 [all …]
|
/openbmc/linux/arch/arm64/boot/dts/mediatek/ |
H A D | mt7986a.dtsi | 21 #size-cells = <0>; 22 cpu0: cpu@0 { 24 reg = <0x0>; 32 reg = <0x1>; 40 reg = <0x2>; 48 reg = <0x3>; 58 #clock-cells = <0>; 73 reg = <0 0x43000000 0 0x30000>; 79 reg = <0 0x4fc00000 0 0x00100000>; 83 reg = <0 0x4fd00000 0 0x40000>; [all …]
|
H A D | mt8365.dtsi | 21 #size-cells = <0>; 23 cluster0_opp: opp-table-0 { 125 cpu0: cpu@0 { 128 reg = <0x0>; 132 i-cache-size = <0x8000>; 135 d-cache-size = <0x8000>; 148 reg = <0x1>; 152 i-cache-size = <0x8000>; 155 d-cache-size = <0x8000>; 168 reg = <0x2>; [all …]
|
/openbmc/linux/drivers/net/wireless/intel/iwlegacy/ |
H A D | prph.h | 70 #define PRPH_BASE (0x00000) 71 #define PRPH_END (0xFFFFF) 74 #define APMG_BASE (PRPH_BASE + 0x3000) 75 #define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000) 76 #define APMG_CLK_EN_REG (APMG_BASE + 0x0004) 77 #define APMG_CLK_DIS_REG (APMG_BASE + 0x0008) 78 #define APMG_PS_CTRL_REG (APMG_BASE + 0x000c) 79 #define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010) 80 #define APMG_RFKILL_REG (APMG_BASE + 0x0014) 81 #define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c) [all …]
|
/openbmc/qemu/hw/vfio/ |
H A D | igd.c | 62 if ((vdev->device_id & 0xfff) == 0xa84) { in igd_gen() 66 switch (vdev->device_id & 0xff00) { in igd_gen() 68 case 0x0000: in igd_gen() 69 case 0x2500: in igd_gen() 70 case 0x2700: in igd_gen() 71 case 0x2900: in igd_gen() 72 case 0x2a00: in igd_gen() 73 case 0x2e00: in igd_gen() 74 case 0x3500: in igd_gen() 75 case 0xa000: in igd_gen() [all …]
|
/openbmc/u-boot/include/dt-bindings/pinctrl/ |
H A D | stm32f746-pinfunc.h | 4 #define STM32F746_PA0_FUNC_GPIO 0x0 5 #define STM32F746_PA0_FUNC_TIM2_CH1_TIM2_ETR 0x2 6 #define STM32F746_PA0_FUNC_TIM5_CH1 0x3 7 #define STM32F746_PA0_FUNC_TIM8_ETR 0x4 8 #define STM32F746_PA0_FUNC_USART2_CTS 0x8 9 #define STM32F746_PA0_FUNC_UART4_TX 0x9 10 #define STM32F746_PA0_FUNC_SAI2_SD_B 0xb 11 #define STM32F746_PA0_FUNC_ETH_MII_CRS 0xc 12 #define STM32F746_PA0_FUNC_EVENTOUT 0x10 13 #define STM32F746_PA0_FUNC_ANALOG 0x11 [all …]
|
H A D | stm32h7-pinfunc.h | 4 #define STM32H7_PA0_FUNC_GPIO 0x0 5 #define STM32H7_PA0_FUNC_TIM2_CH1_TIM2_ETR 0x2 6 #define STM32H7_PA0_FUNC_TIM5_CH1 0x3 7 #define STM32H7_PA0_FUNC_TIM8_ETR 0x4 8 #define STM32H7_PA0_FUNC_TIM15_BKIN 0x5 9 #define STM32H7_PA0_FUNC_USART2_CTS_NSS 0x8 10 #define STM32H7_PA0_FUNC_UART4_TX 0x9 11 #define STM32H7_PA0_FUNC_SDMMC2_CMD 0xa 12 #define STM32H7_PA0_FUNC_SAI2_SD_B 0xb 13 #define STM32H7_PA0_FUNC_ETH_MII_CRS 0xc [all …]
|
/openbmc/linux/drivers/media/dvb-frontends/ |
H A D | s5h1411.c | 42 } while (0) 50 { S5H1411_I2C_TOP_ADDR, 0x00, 0x0071, }, 51 { S5H1411_I2C_TOP_ADDR, 0x08, 0x0047, }, 52 { S5H1411_I2C_TOP_ADDR, 0x1c, 0x0400, }, 53 { S5H1411_I2C_TOP_ADDR, 0x1e, 0x0370, }, 54 { S5H1411_I2C_TOP_ADDR, 0x1f, 0x342c, }, 55 { S5H1411_I2C_TOP_ADDR, 0x24, 0x0231, }, 56 { S5H1411_I2C_TOP_ADDR, 0x25, 0x1011, }, 57 { S5H1411_I2C_TOP_ADDR, 0x26, 0x0f07, }, 58 { S5H1411_I2C_TOP_ADDR, 0x27, 0x0f04, }, [all …]
|
/openbmc/linux/drivers/clk/renesas/ |
H A D | renesas-cpg-mssr.c | 39 #define WARN_DEBUG(x) do { } while (0) 56 0x030, 0x038, 0x040, 0x048, 0x04C, 0x03C, 0x1C0, 0x1C4, 57 0x9A0, 0x9A4, 0x9A8, 0x9AC, 61 0x2E00, 0x2E04, 0x2E08, 0x2E0C, 0x2E10, 0x2E14, 0x2E18, 0x2E1C, 62 0x2E20, 0x2E24, 0x2E28, 0x2E2C, 0x2E30, 0x2E34, 0x2E38, 0x2E3C, 63 0x2E40, 0x2E44, 0x2E48, 0x2E4C, 0x2E50, 0x2E54, 0x2E58, 0x2E5C, 64 0x2E60, 0x2E64, 0x2E68, 0x2E6C, 0x2E70, 0x2E74, 72 0x130, 0x134, 0x138, 0x13C, 0x140, 0x144, 0x148, 0x14C, 73 0x990, 0x994, 0x998, 0x99C, 77 0x2D00, 0x2D04, 0x2D08, 0x2D0C, 0x2D10, 0x2D14, 0x2D18, 0x2D1C, [all …]
|
/openbmc/linux/drivers/net/wireless/ralink/rt2x00/ |
H A D | rt61pci.h | 20 #define RT2561s_PCI_ID 0x0301 21 #define RT2561_PCI_ID 0x0302 22 #define RT2661_PCI_ID 0x0401 27 #define RF5225 0x0001 28 #define RF5325 0x0002 29 #define RF2527 0x0003 30 #define RF2529 0x0004 41 #define CSR_REG_BASE 0x3000 42 #define CSR_REG_SIZE 0x04b0 43 #define EEPROM_BASE 0x0000 [all …]
|
/openbmc/linux/arch/powerpc/kernel/ |
H A D | head_book3s_32.S | 41 li RA,0; \ 44 lwz RA,(n*16)+0(reg); \ 73 * 0, running with virtual == physical mapping. 78 * from 0x380000 - 0x400000, which is mapped in already. 82 * r3: 'BooX' (0x426f6f58) 84 * r5: 0 91 * r4: initrd_start or if no initrd then 0 92 * r5: initrd_end - unused if r4 is 0 108 cmpwi 0,r5,0 114 0: mflr r8 /* r8 = runtime addr here */ [all …]
|
/openbmc/u-boot/arch/powerpc/cpu/mpc83xx/ |
H A D | start.S | 71 * (0x40) bytes of flash. It has 8 bytes, but each byte is repeated 8 77 .fill 8,1,(((w)>>24)&0xff); \ 78 .fill 8,1,(((w)>>16)&0xff); \ 79 .fill 8,1,(((w)>> 8)&0xff); \ 80 .fill 8,1,(((w) )&0xff) 89 .long 0x27051956 /* U-Boot Magic Number */ 93 .ascii U_BOOT_VERSION_STRING, "\0" 120 lfd 1, 0(r4) 121 stfd 1, 0(r3) 126 lfd 1, 0(r3) [all …]
|