#
335f7b12 |
| 08-Dec-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-mpc85xx
|
#
6c7010b7 |
| 07-Dec-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-fsl-qoriq
|
#
30c41d21 |
| 21-Nov-2017 |
Udit Agarwal <udit.agarwal@nxp.com> |
armv8: LS1088A_QSPI: SECURE_BOOT: Images validation Validates PPA, MC, DPC, Bootscript, DPL and Kernel images in ESBC phase using esbc_validate command. Enable validation of boo
armv8: LS1088A_QSPI: SECURE_BOOT: Images validation Validates PPA, MC, DPC, Bootscript, DPL and Kernel images in ESBC phase using esbc_validate command. Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment Add header address for PPA to be validated during ESBC phase for LS1088A platform based on LAyerscape Chasis 3. Moves sec_init prior to ppa_init as for validation of PPA sec must be initialised before the PPA is initialised. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
show more ...
|
#
819163c4 |
| 13-Nov-2017 |
Ran Wang <ran.wang_1@nxp.com> |
armv8: Workaround for USB erratua on LS1012A This is suplement for patch which handle below errata: A-009007, A-009008, A-008997, A-009798 Signed-off-by: Ran Wang <ran.wang_1@nx
armv8: Workaround for USB erratua on LS1012A This is suplement for patch which handle below errata: A-009007, A-009008, A-008997, A-009798 Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
show more ...
|
#
6e6cf015 |
| 27-Nov-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://www.denx.de/git/u-boot-imx Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
29c49922 |
| 19-Nov-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-dm
|
#
ebca2083 |
| 16-Nov-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://www.denx.de/git/u-boot-marvell
|
#
f65425fb |
| 01-Nov-2017 |
Ashish Kumar <Ashish.Kumar@nxp.com> |
armv8: ls1088: Enable SATA for ls1088 Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
|
#
2d5e6b4a |
| 29-Oct-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-video
|
#
bb3d9ed3 |
| 27-Oct-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-fsl-qoriq
|
#
4417e834 |
| 22-Oct-2017 |
Ran Wang <ran.wang_1@nxp.com> |
arm64: layerscape: Move CONFIG_HAS_FSL_XHCI_USB to Kconfig Use Kconfig to select QE-HDLC and USB pin-mux. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bme
arm64: layerscape: Move CONFIG_HAS_FSL_XHCI_USB to Kconfig Use Kconfig to select QE-HDLC and USB pin-mux. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
show more ...
|
#
002e9108 |
| 18-Oct-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-spi
|
#
f855a7bc |
| 13-Oct-2017 |
Tom Rini <trini@konsulko.com> |
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot Patch queue for efi - 2017-10-13 This is the second batch of amazing improvements for efi_loader in 2017.11:
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot Patch queue for efi - 2017-10-13 This is the second batch of amazing improvements for efi_loader in 2017.11: - New self tests to verify our own code - A few bug fixes - colored text support - event and SNP improvements, should get us close to iPXE working
show more ...
|
#
26f9184e |
| 12-Oct-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-fsl-qoriq
|
#
7458c5e6 |
| 22-Sep-2017 |
Ran Wang <ran.wang_1@nxp.com> |
armv8: Apply workaround for USB erratum A-009007 to LS1088A Rx Compliance tests may fail intermittently at high jitter frequencies using default register values. Program registe
armv8: Apply workaround for USB erratum A-009007 to LS1088A Rx Compliance tests may fail intermittently at high jitter frequencies using default register values. Program register USB_PHY_RX_OVRD_IN_HI in certain sequence to make the Rx compliance test pass. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
show more ...
|
#
2dc5b553 |
| 21-Sep-2017 |
Tom Rini <trini@konsulko.com> |
Merge branch 'next' of git://git.denx.de/u-boot-video
|
#
1c7b5d03 |
| 15-Sep-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-ubi
|
#
8a33cb8b |
| 12-Sep-2017 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-fsl-qoriq
|
#
15d59b53 |
| 04-Sep-2017 |
Ran Wang <ran.wang_1@nxp.com> |
armv8: Add workaround for USB erratum A-009007 Rx Compliance tests may fail intermittently at high jitter frequencies using default register values. Program register USB_PHY_RX_
armv8: Add workaround for USB erratum A-009007 Rx Compliance tests may fail intermittently at high jitter frequencies using default register values. Program register USB_PHY_RX_OVRD_IN_HI in certain sequence to make the Rx compliance test pass. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.bhagat@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
show more ...
|
#
9d1cd910 |
| 04-Sep-2017 |
Ran Wang <ran.wang_1@nxp.com> |
armv8: Add workaround for USB erratum A-008997 Low Frequency Periodic Signaling(LFPS) Peak-to-Peak Differential Output Voltage Test Compliance fails using default transmitter setting
armv8: Add workaround for USB erratum A-008997 Low Frequency Periodic Signaling(LFPS) Peak-to-Peak Differential Output Voltage Test Compliance fails using default transmitter settings Change config of transmitter signal swings by setting register PCSTXSWINGFULL to 0x47 to pass compliance tests. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
show more ...
|
#
2a8a3539 |
| 04-Sep-2017 |
Ran Wang <ran.wang_1@nxp.com> |
armv8: Add workaround for USB erratum A-009798 The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receiver Co
armv8: Add workaround for USB erratum A-009798 The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receiver Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
show more ...
|
#
2ab1553f |
| 04-Sep-2017 |
Ran Wang <ran.wang_1@nxp.com> |
armv8: Add workaround for USB erratum A-009008 USB High Speed (HS) EYE Height Adjustment USB HS speed eye diagram fails with the default value at many corners, particularly at a high
armv8: Add workaround for USB erratum A-009008 USB High Speed (HS) EYE Height Adjustment USB HS speed eye diagram fails with the default value at many corners, particularly at a high temperature Optimal eye at TXREFTUNE value to 0x9 is observed, change set the same value. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
show more ...
|
#
17d066fc |
| 31-Aug-2017 |
Ashish Kumar <Ashish.Kumar@nxp.com> |
armv8: fsl-layerscape: Support to add RGMII for ls1088aqds This patch adds support for RGMII protocol NXP's LDPAA2 support RGMII protocol. LS1088A is the first Soc supporting bo
armv8: fsl-layerscape: Support to add RGMII for ls1088aqds This patch adds support for RGMII protocol NXP's LDPAA2 support RGMII protocol. LS1088A is the first Soc supporting both RGMII and SGMII. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
show more ...
|
#
e84a324b |
| 31-Aug-2017 |
Ashish Kumar <Ashish.Kumar@nxp.com> |
armv8: ls1088ardb: Add support for LS1088ARDB platform LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. This patch add
armv8: ls1088ardb: Add support for LS1088ARDB platform LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. This patch add basic support of the platform. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Disabled NAND in board header file] Reviewed-by: York Sun <york.sun@nxp.com> WIP: disable NAND for LS1088ARDB
show more ...
|
#
6d9b82d0 |
| 31-Aug-2017 |
Ashish Kumar <Ashish.Kumar@nxp.com> |
armv8: ls1088a: Add NXP LS1088A SoC support LS1088A is compliant with the Layerscape Chassis Generation 3 with eight ARM v8 Cortex-A53 cores in 2 cluster, CCI-400, one 64-bit DDR4 SD
armv8: ls1088a: Add NXP LS1088A SoC support LS1088A is compliant with the Layerscape Chassis Generation 3 with eight ARM v8 Cortex-A53 cores in 2 cluster, CCI-400, one 64-bit DDR4 SDRAM memory controller with ECC, Data path acceleration architecture 2.0 (DPAA2), Ethernet interfaces (SGMIIs, RGMIIs, QSGMIIs, XFIs), QSPI, IFC, PCIe, SATA, USB, SDXC, DUARTs etc. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
show more ...
|