net: hns3: fix two coding style issues in hclgevf_main.c

Remove a redundant blank line in hclgevf_cmd_set_promisc_mode(),
and fix a reverse xmas tree coding style issue in
hclgevf_set_rss_tc_mode().

net: hns3: fix two coding style issues in hclgevf_main.c

Remove a redundant blank line in hclgevf_cmd_set_promisc_mode(),
and fix a reverse xmas tree coding style issue in
hclgevf_set_rss_tc_mode().

Reported-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: remove two duplicated register macros in hclgevf_main.h

HCLGEVF_CMDQ_INTR_SRC_REG and HCLGEVF_CMDQ_INTR_STS_REG are same
as HCLGEVF_VECTOR0_CMDQ_SRC_REG and HCLGEVF_VECTOR0_CMDQ_STAT_REG,

net: hns3: remove two duplicated register macros in hclgevf_main.h

HCLGEVF_CMDQ_INTR_SRC_REG and HCLGEVF_CMDQ_INTR_STS_REG are same
as HCLGEVF_VECTOR0_CMDQ_SRC_REG and HCLGEVF_VECTOR0_CMDQ_STAT_REG,
replace the former with the latter, and rename macro
HCLGEVF_VECTOR0_CMDQ_STAT_REG since 'stat' is not abbreviation of
'state'.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: modify an incorrect type in struct hclgevf_cfg_gro_status_cmd

Modify field .gro_en in struct hclgevf_cfg_gro_status_cmd to u8
according to the UM, otherwise, it will overwrite the reserve

net: hns3: modify an incorrect type in struct hclgevf_cfg_gro_status_cmd

Modify field .gro_en in struct hclgevf_cfg_gro_status_cmd to u8
according to the UM, otherwise, it will overwrite the reserved
byte which may be used for other purpose.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: add a resetting check in hclgevf_init_nic_client_instance()

To prevent from initializing VF NIC client in reset handling state,
this patch adds resetting check in hclgevf_init_nic_client_

net: hns3: add a resetting check in hclgevf_init_nic_client_instance()

To prevent from initializing VF NIC client in reset handling state,
this patch adds resetting check in hclgevf_init_nic_client_instance().

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: optimize the filter table entries handling when resetting

Currently, the PF driver removes all (including its VFs') MAC/VLAN
flow director table entries when resetting, and restores them

net: hns3: optimize the filter table entries handling when resetting

Currently, the PF driver removes all (including its VFs') MAC/VLAN
flow director table entries when resetting, and restores them after
reset completed.

In fact, the hardware will clear all table entries only in IMP
reset and global reset. So driver only needs to restore the table
entries in these cases, and needs do nothing when PF reset, FLR
or other function level reset.

This patch optimizes it by removing unnecessary table entries clear
and restoring handling in the reset flow, and doing the restoring
after reset completed.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: refactor the promisc mode setting

As the HNS3 driver doesn't update the MAC address directly in
function hns3_set_rx_mode() now, it can't know whether the
MAC table is full from __dev_uc_

net: hns3: refactor the promisc mode setting

As the HNS3 driver doesn't update the MAC address directly in
function hns3_set_rx_mode() now, it can't know whether the
MAC table is full from __dev_uc_sync() and __dev_mc_sync(),
so it's senseless to handle the overflow promisc here.

This patch removes the handle of overflow promisc from function
hns3_set_rx_mode(), and updates the promisc mode in the service
task.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: refactor the MAC address configure

Currently, the HNS3 driver sync and unsync MAC address in function
hns3_set_rx_mode(). For PF, it adds and deletes MAC address directly
in the path of d

net: hns3: refactor the MAC address configure

Currently, the HNS3 driver sync and unsync MAC address in function
hns3_set_rx_mode(). For PF, it adds and deletes MAC address directly
in the path of dev_set_rx_mode(). If failed, it won't retry until
next calling of hns3_set_rx_mode(). On the other hand, if request
add and remove a same address many times at a short interval, each
request must be done one by one, can't be merged. For VF, it sends
mailbox messages to PF to request adding or deleting MAC address in
the path of function hns3_set_rx_mode(), no matter the address is
configured success.

This patch refines it by recording the MAC address in function
hns3_set_rx_mode(), and updating MAC address in the service task.
If failed, it will retry by the next calling of periodical service
task. It also uses some state to mark the state of each MAC address
in the MAC list, which can help merge configure request for a same
address. With these changes, when global reset or IMP reset occurs,
we can restore the MAC table with the MAC list.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: fix RSS config lost after VF reset.

Currently, VF's RSS configuration would be set to default
after VF reset, the the user's one will loss.

To fix it, this patch separates hclgevf_rss_in

net: hns3: fix RSS config lost after VF reset.

Currently, VF's RSS configuration would be set to default
after VF reset, the the user's one will loss.

To fix it, this patch separates hclgevf_rss_init_hw() into
two parts, one sets up the default RSS configuration and
just be called when driver loading, one configures the hardware
and be called by driver loading or reset.

Fixes: d97b30721301 ("net: hns3: Add RSS tuples support for VF")
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: drop the WQ_MEM_RECLAIM flag when allocating WQ

The WQ in hns3 driver is allocated with WQ_MEM_RECLAIM flag
in order to guarantee forward progress, which may cause hns3'
WQ_MEM_RECLAIM WQ

net: hns3: drop the WQ_MEM_RECLAIM flag when allocating WQ

The WQ in hns3 driver is allocated with WQ_MEM_RECLAIM flag
in order to guarantee forward progress, which may cause hns3'
WQ_MEM_RECLAIM WQ flushing infiniband' !WQ_MEM_RECLAIM WQ
warning:

[11246.200168] hns3 0000:bd:00.1: Reset done, hclge driver initialization finished.
[11246.209979] hns3 0000:bd:00.1 eth7: net open
[11246.227608] ------------[ cut here ]------------
[11246.237370] workqueue: WQ_MEM_RECLAIM hclge:hclge_service_task [hclge] is flushing !WQ_MEM_RECLAIM infiniband:0x0
[11246.237391] WARNING: CPU: 50 PID: 2279 at ./kernel/workqueue.c:2605 check_flush_dependency+0xcc/0x140
[11246.260412] Modules linked in: hclgevf hns_roce_hw_v2 rdma_test(O) hns3 xt_CHECKSUM iptable_mangle xt_conntrack ipt_REJECT nf_reject_ipv4 ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bpfilter vfio_iommu_type1 vfio_pci vfio_virqfd vfio ib_isert iscsi_target_mod ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi aes_ce_blk crypto_simd cryptd aes_ce_cipher sunrpc nls_iso8859_1 crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce joydev input_leds hid_generic usbkbd usbmouse sbsa_gwdt usbhid usb_storage hid ses hclge hisi_zip hisi_hpre hisi_sec2 hnae3 hisi_qm ahci hisi_trng_v2 evbug uacce rng_core gpio_dwapb autofs4 hisi_sas_v3_hw megaraid_sas hisi_sas_main libsas scsi_transport_sas [last unloaded: hns_roce_hw_v2]
[11246.325742] CPU: 50 PID: 2279 Comm: kworker/50:0 Kdump: loaded Tainted: G O 5.4.0-rc4+ #1
[11246.335181] Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B140.01 12/18/2019
[11246.344802] Workqueue: hclge hclge_service_task [hclge]
[11246.350007] pstate: 60c00009 (nZCv daif +PAN +UAO)
[11246.354779] pc : check_flush_dependency+0xcc/0x140
[11246.359549] lr : check_flush_dependency+0xcc/0x140
[11246.364317] sp : ffff800268a73990
[11246.367618] x29: ffff800268a73990 x28: 0000000000000001
[11246.372907] x27: ffffcbe4f5868000 x26: ffffcbe4f5541000
[11246.378196] x25: 00000000000000b8 x24: ffff002fdd0ff868
[11246.383483] x23: ffff002fdd0ff800 x22: ffff2027401ba600
[11246.388770] x21: 0000000000000000 x20: ffff002fdd0ff800
[11246.394059] x19: ffff202719293b00 x18: ffffcbe4f5541948
[11246.399347] x17: 000000006f8ad8dd x16: 0000000000000002
[11246.404634] x15: ffff8002e8a734f7 x14: 6c66207369205d65
[11246.409922] x13: 676c63685b206b73 x12: 61745f6563697672
[11246.415208] x11: 65735f65676c6368 x10: 3a65676c6368204d
[11246.420494] x9 : 49414c4345525f4d x8 : 6e6162696e69666e
[11246.425782] x7 : 69204d49414c4345 x6 : ffffcbe4f5765145
[11246.431068] x5 : 0000000000000000 x4 : 0000000000000000
[11246.436355] x3 : 0000000000000030 x2 : 00000000ffffffff
[11246.441642] x1 : 3349eb1ac5310100 x0 : 0000000000000000
[11246.446928] Call trace:
[11246.449363] check_flush_dependency+0xcc/0x140
[11246.453785] flush_workqueue+0x110/0x410
[11246.457691] ib_cache_cleanup_one+0x54/0x468
[11246.461943] __ib_unregister_device+0x70/0xa8
[11246.466279] ib_unregister_device+0x2c/0x40
[11246.470455] hns_roce_exit+0x34/0x198 [hns_roce_hw_v2]
[11246.475571] __hns_roce_hw_v2_uninit_instance.isra.56+0x3c/0x58 [hns_roce_hw_v2]
[11246.482934] hns_roce_hw_v2_reset_notify+0xd8/0x210 [hns_roce_hw_v2]
[11246.489261] hclge_notify_roce_client+0x84/0xe0 [hclge]
[11246.494464] hclge_reset_rebuild+0x60/0x730 [hclge]
[11246.499320] hclge_reset_service_task+0x400/0x5a0 [hclge]
[11246.504695] hclge_service_task+0x54/0x698 [hclge]
[11246.509464] process_one_work+0x15c/0x458
[11246.513454] worker_thread+0x144/0x520
[11246.517186] kthread+0xfc/0x128
[11246.520314] ret_from_fork+0x10/0x18
[11246.523873] ---[ end trace eb980723699c2585 ]---
[11246.528710] hns3 0000:bd:00.2: Func clear success after reset.
[11246.528747] hns3 0000:bd:00.0: Func clear success after reset.
[11246.907710] hns3 0000:bd:00.1 eth7: link up

According to [1] and [2]:

There seems to be no specific guidance about how to handling the
forward progress guarantee of network device's WQ yet, and other
network device's WQ seem to be marked with WQ_MEM_RECLAIM without
a clear reason.

So this patch removes the WQ_MEM_RECLAIM flag when allocating WQ
to aviod the above warning.

1. https://www.spinics.net/lists/netdev/msg631646.html
2. https://www.spinics.net/lists/netdev/msg632097.html

Fixes: 0ea68902256e ("net: hns3: allocate WQ with WQ_MEM_RECLAIM flag")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: refactor the mailbox message between PF and VF

For making the code more readable, this adds several new
structure to replace the msg field in structure
hclge_mbx_vf_to_pf_cmd and hclge_mb

net: hns3: refactor the mailbox message between PF and VF

For making the code more readable, this adds several new
structure to replace the msg field in structure
hclge_mbx_vf_to_pf_cmd and hclge_mbx_pf_to_vf_cmd.
Also uses macro to instead of some magic number.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: fix VF VLAN table entries inconsistent issue

Currently, if VF is loaded on the host side, the host doesn't
clear the VF's VLAN table entries when VF removing. In this
case, when doing res

net: hns3: fix VF VLAN table entries inconsistent issue

Currently, if VF is loaded on the host side, the host doesn't
clear the VF's VLAN table entries when VF removing. In this
case, when doing reset and disabling sriov at the same time the
VLAN device over VF will be removed, but the VLAN table entries
in hardware are remained.

This patch fixes it by asking PF to clear the VLAN table entries for
VF when VF is removing. It also clears the VLAN table full bit
after VF VLAN table entries being cleared.

Fixes: c6075b193462 ("net: hns3: Record VF vlan tables")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: print out status register when VF receives unknown source interrupt

When received an unknown vector 0 interrupt, there is not a
helpful information for user to realize that now. So this p

net: hns3: print out status register when VF receives unknown source interrupt

When received an unknown vector 0 interrupt, there is not a
helpful information for user to realize that now. So this patch
prints out the value of the status register for this case, and
uses dev_info() instead of dev_dbg() in hclge_check_event_cause().

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: cleanup some coding style issue

This patch removes some unnecessary return value assignments,
some duplicated printing in the caller, refines the judgment
of 0 and uses le16_to_cpu to rep

net: hns3: cleanup some coding style issue

This patch removes some unnecessary return value assignments,
some duplicated printing in the caller, refines the judgment
of 0 and uses le16_to_cpu to replace __le16_to_cpu.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: delete unnecessary blank line and space for cleanup

This patch deletes some unnecessary blank lines and spaces to clean up
code, and in hclgevf_set_vlan_filter() moves the comment to the

net: hns3: delete unnecessary blank line and space for cleanup

This patch deletes some unnecessary blank lines and spaces to clean up
code, and in hclgevf_set_vlan_filter() moves the comment to the front
of hclgevf_send_mbx_msg().

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: set VF's default reset_type to HNAE3_NONE_RESET

reset_type means what kind of reset the driver is handling now,
so after initializing or reset, the reset_type of VF should be
set to HNAE3

net: hns3: set VF's default reset_type to HNAE3_NONE_RESET

reset_type means what kind of reset the driver is handling now,
so after initializing or reset, the reset_type of VF should be
set to HNAE3_NONE_RESET, otherwise, this unknown default value
may be a little misleading when the device is running.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: refactor the procedure of VF FLR

Currently, the actual work of VF FLR is handled in the reset task,
which is asynchronous. So in some case, if the preparing and
rebuilding are not done, t

net: hns3: refactor the procedure of VF FLR

Currently, the actual work of VF FLR is handled in the reset task,
which is asynchronous. So in some case, if the preparing and
rebuilding are not done, then the VF FLR will trigger some problems,
for example, makes hardware go into chaos.

So this patch separates the process of VF FLR from reset task, and
adds a semaphore to serialize this reset and others.

When FLR's preparing fails, if there has other higher level reset
pending or failing times less than the HCLGE_FLR_RETRY_CNT, this
preparing should be retried, otherwise it will get into a wrong state.

BTW, while the hardware reports misc interrupt during pcie_flr(),
the driver can not receive this interrupt anymore, so disable it
when hclgevf_flr_prepare() return, and re-enable it when enter
hclgevf_flr_done().

Avoid declaring internal function hclgevf_enable_vector(), this patch
also moves its definition forward, and removes unused enum
hnae3_flr_state.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: split hclgevf_reset() into preparing and rebuilding part

hclgevf_reset() is a little bloated, and the process of VF FLR will
be separated from the reset task later. So this patch splits
h

net: hns3: split hclgevf_reset() into preparing and rebuilding part

hclgevf_reset() is a little bloated, and the process of VF FLR will
be separated from the reset task later. So this patch splits
hclgevf_reset() into hclgevf_reset_prepare() and hclge_reset_rebuild(),
then FLR can also reuse these two functions. Also moves HNAE3_UP_CLIENT
into hclgevf_reset_stack().

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: modify the IRQ name of misc vectors

The misc IRQ of all the devices have the same name, so it's
hard to find the right misc IRQ of the device.

This patch modifies the misc IRQ names as "

net: hns3: modify the IRQ name of misc vectors

The misc IRQ of all the devices have the same name, so it's
hard to find the right misc IRQ of the device.

This patch modifies the misc IRQ names as "hclge/hclgevf"-misc-
"pci name". And now the IRQ name is not related to net device
name anymore, so change the HNAE3_INT_NAME_LEN to 32 bytes, and
that is enough.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: do not schedule the periodic task when reset fail

service_task will be scheduled per second to do some periodic
jobs. When reset fails, it means this device is not available
now, so the

net: hns3: do not schedule the periodic task when reset fail

service_task will be scheduled per second to do some periodic
jobs. When reset fails, it means this device is not available
now, so the periodic jobs do not need to be handled.

This patch adds flag HCLGE_STATE_RST_FAIL/HCLGEVF_STATE_RST_FAIL
to indicate that reset fails, and checks this flag before
schedule periodic task.

Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: allocate WQ with WQ_MEM_RECLAIM flag

The hns3 driver may be used in memory reclaim path when it
is the low level transport of a network file system, so it
needs to guarantee forward progr

net: hns3: allocate WQ with WQ_MEM_RECLAIM flag

The hns3 driver may be used in memory reclaim path when it
is the low level transport of a network file system, so it
needs to guarantee forward progress even under memory pressure.

This patch allocates a private WQ with WQ_MEM_RECLAIM set for
both hclge_main and hclgevf_main modules.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: remove unnecessary work in hclgevf_main

There are four work (mbx_service_task, service_task,
rst_service_task and keep_alive_task)in the hclgevf module,
mbx_service_task is for handling m

net: hns3: remove unnecessary work in hclgevf_main

There are four work (mbx_service_task, service_task,
rst_service_task and keep_alive_task)in the hclgevf module,
mbx_service_task is for handling mailbox issue, service_task is
for periodic management issue and rst_service_task is for reset
related issue, keep_alive_task is used to keepalive between PF
and VF, which can be done in a single work.

This patch removes the mbx_service_task, rst_service_task and
keep_alive_task, and moves the related handling to the
service_task work in order to remove concurrency between the four
work and to improve efficiency.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: schedule hclgevf_service by using delayed workqueue

Currently, a timer is defined to schedule hclgevf_service per
second. To simplify the code, this patch uses the delayed work
instead of

net: hns3: schedule hclgevf_service by using delayed workqueue

Currently, a timer is defined to schedule hclgevf_service per
second. To simplify the code, this patch uses the delayed work
instead of timer to schedule hclgevf_serive.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: cleanup some print format warning

Using '%d' for printing type unsigned int or '%u' for
type int would cause static tools to give false warnings,
so this patch cleanups this warning by us

net: hns3: cleanup some print format warning

Using '%d' for printing type unsigned int or '%u' for
type int would cause static tools to give false warnings,
so this patch cleanups this warning by using the suitable
format specifier of the type of variable.

BTW, modifies the type of some variables and macro to
synchronize with their usage.

Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: cleanup some coding style issues

To unify code style and make code simpler, this patch modifies
some code, deletes unnecessary blank lines and {}, changes
location of code, and so on.

No

net: hns3: cleanup some coding style issues

To unify code style and make code simpler, this patch modifies
some code, deletes unnecessary blank lines and {}, changes
location of code, and so on.

No functional change.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: hns3: cleanup some magic numbers

To make the code more readable, this patch replaces
some magic numbers with macro or sizeof operation.

Also uses macro lower_32_bits and upper_32_bits to
get b

net: hns3: cleanup some magic numbers

To make the code more readable, this patch replaces
some magic numbers with macro or sizeof operation.

Also uses macro lower_32_bits and upper_32_bits to
get bits 0-31 and 32-63 of a number, instead of
using type conversion and '>>' operation.

No functional change.

Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...