powerpc/powernv/pci: use pci_dev_id() to simplify the code

PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it mannually. Use pci_dev_id() to
si

powerpc/powernv/pci: use pci_dev_id() to simplify the code

PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it mannually. Use pci_dev_id() to
simplify the code a little bit.

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230804080435.191196-1-wangxiongfeng2@huawei.com

show more ...

powerpc/powernv/pci: Remove last IODA1 defines

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230613045202.294451-4-joel

powerpc/powernv/pci: Remove last IODA1 defines

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230613045202.294451-4-joel@jms.id.au

show more ...

powerpc/powernv/pci: Remove MVE code

With IODA1 support gone the OPAL calls to set MVE are dead code. Remove
them.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@

powerpc/powernv/pci: Remove MVE code

With IODA1 support gone the OPAL calls to set MVE are dead code. Remove
them.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230613045202.294451-3-joel@jms.id.au

show more ...

powerpc/powernv/pci: Remove ioda1 support

The final "VPL" Power7 boxes that were used for powernv bringup have
been scrapped, meaning there are no machines with ioda1 left.

This patch removes the o

powerpc/powernv/pci: Remove ioda1 support

The final "VPL" Power7 boxes that were used for powernv bringup have
been scrapped, meaning there are no machines with ioda1 left.

This patch removes the obvious unused code.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230613045202.294451-2-joel@jms.id.au

show more ...

mm, treewide: redefine MAX_ORDER sanely

MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.

This definiti

mm, treewide: redefine MAX_ORDER sanely

MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.

This definition is counter-intuitive and lead to number of bugs all over
the kernel.

Change the definition of MAX_ORDER to be inclusive: the range of orders
user can ask from buddy allocator is 0..MAX_ORDER now.

[kirill@shutemov.name: fix min() warning]
Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box
[akpm@linux-foundation.org: fix another min_t warning]
[kirill@shutemov.name: fixups per Zi Yan]
Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name
[akpm@linux-foundation.org: fix underlining in docs]
Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains

Up until now PPC64 managed to avoid using iommu_ops. The VFIO driver
uses a SPAPR TCE sub-driver and all iommu_ops uses

powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains

Up until now PPC64 managed to avoid using iommu_ops. The VFIO driver
uses a SPAPR TCE sub-driver and all iommu_ops uses were kept in the
Type1 VFIO driver. Recent development added 2 uses of iommu_ops to the
generic VFIO which broke POWER:
- a coherency capability check;
- blocking IOMMU domain - iommu_group_dma_owner_claimed()/...

This adds a simple iommu_ops which reports support for cache coherency
and provides a basic support for blocking domains. No other domain types
are implemented so the default domain is NULL.

Since now iommu_ops controls the group ownership, this takes it out of
VFIO.

This adds an IOMMU device into a pci_controller (=PHB) and registers it
in the IOMMU subsystem, iommu_ops is registered at this point. This
setup is done in postcore_initcall_sync.

This replaces iommu_group_add_device() with iommu_probe_device() as the
former misses necessary steps in connecting PCI devices to IOMMU
devices. This adds a comment about why explicit iommu_probe_device() is
still needed.

The previous discussion is here:
https://lore.kernel.org/r/20220707135552.3688927-1-aik@ozlabs.ru/
https://lore.kernel.org/r/20220701061751.1955857-1-aik@ozlabs.ru/

Fixes: e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence")
Fixes: 70693f470848 ("vfio: Set DMA ownership for VFIO devices")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[mpe: Fix CONFIG_IOMMU_API=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2000135730.16998523.1678123860135.JavaMail.zimbra@raptorengineeringinc.com

show more ...

powerpc/iommu: Add "borrowing" iommu_table_group_ops

PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows
for PEs: control the ownership, create/set/unset a table the hardware
for

powerpc/iommu: Add "borrowing" iommu_table_group_ops

PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows
for PEs: control the ownership, create/set/unset a table the hardware
for dynamic DMA windows (DDW). VFIO uses the API to implement support on
POWER.

So far only PowerNV IODA2 (POWER8 and newer machines) implemented this
and other cases (POWER7 or nested KVM) did not and instead reused
existing iommu_table structs. This means 1) no DDW 2) ownership transfer
is done directly in the VFIO SPAPR TCE driver.

Soon POWER is going to get its own iommu_ops and ownership control is
going to move there. This implements spapr_tce_table_group_ops which
borrows iommu_table tables. The upside is that VFIO needs to know less
about POWER.

The new ops returns the existing table from create_table() and only
checks if the same window is already set. This is only going to work if
the default DMA window starts table_group.tce32_start and as big as
pe->table_group.tce32_size (not the case for IODA2+ PowerNV).

This changes iommu_table_group_ops::take_ownership() to return an error
if borrowing a table failed.

This should not cause any visible change in behavior for PowerNV.
pSeries was not that well tested/supported anyway.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[mpe: Fix CONFIG_IOMMU_API=n build (skiroot_defconfig), & formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/525438831.16998517.1678123820075.JavaMail.zimbra@raptorengineeringinc.com

show more ...

powerpc/powernv/ioda: Skip unallocated resources when mapping to PE

pnv_ioda_setup_pe_res() calls opal to map a resource with a PE. However,
the code assumes the resource is allocated and it uses th

powerpc/powernv/ioda: Skip unallocated resources when mapping to PE

pnv_ioda_setup_pe_res() calls opal to map a resource with a PE. However,
the code assumes the resource is allocated and it uses the resource
address to find out the segment(s) which need to be mapped to the
PE. In the unlikely case where the resource hasn't been allocated, the
computation for the segment number is garbage, which can lead to
invalid memory access and potentially a kernel crash, such as:

[ ] pci_bus 0002:02: Configuring PE for bus
[ ] pci 0002:02 : [PE# fc] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fc
[ ] BUG: Kernel NULL pointer dereference on write at 0x00000000
[ ] Faulting instruction address: 0xc00000000005eac4
[ ] Oops: Kernel access of bad area, sig: 7 [#1]
[ ] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
[ ] Modules linked in:
[ ] CPU: 12 PID: 1 Comm: swapper/20 Not tainted 5.10.50-openpower1 #2
[ ] NIP: c00000000005eac4 LR: c00000000005ea44 CTR: 0000000030061b9c
[ ] REGS: c000200007383650 TRAP: 0300 Not tainted (5.10.50-openpower1)
[ ] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44000224 XER: 20040000
[ ] CFAR: c00000000005eaa0 DAR: 0000000000000000 DSISR: 02080000 IRQMASK: 0
[ ] GPR00: c00000000005dd98 c0002000073838e0 c00000000185de00 c000200fff018960
[ ] GPR04: 00000000000000fc 0000000000000003 0000000000000000 0000000000000000
[ ] GPR08: 0000000000000000 0000000000000000 0000000000000000 9000000000001033
[ ] GPR12: 0000000031cb0000 c000000ffffe6a80 c000000000010a58 0000000000000000
[ ] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ ] GPR20: 0000000000000000 0000000000000000 0000000000000000 c00000000711e200
[ ] GPR24: 0000000000000100 c000200009501120 c00020000cee2800 00000000000003ff
[ ] GPR28: c000200fff018960 0000000000000000 c000200ffcb7fd00 0000000000000000
[ ] NIP [c00000000005eac4] pnv_ioda_setup_pe_res+0x94/0x1a0
[ ] LR [c00000000005ea44] pnv_ioda_setup_pe_res+0x14/0x1a0
[ ] Call Trace:
[ ] [c0002000073838e0] [c00000000005eb98] pnv_ioda_setup_pe_res+0x168/0x1a0 (unreliable)
[ ] [c000200007383970] [c00000000005dd98] pnv_pci_ioda_dma_dev_setup+0x43c/0x970
[ ] [c000200007383a60] [c000000000032cdc] pcibios_bus_add_device+0x78/0x18c
[ ] [c000200007383aa0] [c00000000028f2bc] pci_bus_add_device+0x28/0xbc
[ ] [c000200007383b10] [c00000000028f3a0] pci_bus_add_devices+0x50/0x7c
[ ] [c000200007383b50] [c00000000028f3c4] pci_bus_add_devices+0x74/0x7c
[ ] [c000200007383b90] [c00000000028f3c4] pci_bus_add_devices+0x74/0x7c
[ ] [c000200007383bd0] [c00000000069ad0c] pcibios_init+0xf0/0x104
[ ] [c000200007383c50] [c0000000000106d8] do_one_initcall+0x84/0x1c4
[ ] [c000200007383d20] [c0000000006910b8] kernel_init_freeable+0x264/0x268
[ ] [c000200007383dc0] [c000000000010a68] kernel_init+0x18/0x138
[ ] [c000200007383e20] [c00000000000cbfc] ret_from_kernel_thread+0x5c/0x80
[ ] Instruction dump:
[ ] 7f89e840 409d000c 7fbbf840 409c000c 38210090 4848f448 809c002c e95e0120
[ ] 7ba91764 38a00003 57a7043e 38c00000 <7c8a492e> 5484043e e87e0018 4bff23bd

Hitting the problem is not that easy. It was seen with a (semi-bogus)
PCI device with a class code of 0. The generic PCI framework doesn't
allocate resources in such a case.

The patch is simply skipping resources which are still flagged with
IORESOURCE_UNSET.

We don't have the problem with 64-bit mem resources, as the address of
the resource is checked to be within the range of the 64-bit mmio
window. See pnv_ioda_reserve_dev_m64_pe() and pnv_pci_is_m64().

Reported-by: Andrew Jeffery <andrew@aj.id.au>
Fixes: 23e79425fe7c ("powerpc/powernv: Simplify pnv_ioda_setup_pe_seg()")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230120093215.19496-1-fbarrat@linux.ibm.com

show more ...

powerpc: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated

powerpc: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Link: https://lore.kernel.org/r/20220818205946.6336-1-wsa+renesas@sang-engineering.com

show more ...

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a nod

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru

show more ...

powerpc: Fix all occurences of "the the"

Rather than waiting for the bots to fix these one-by-one, fix all
occurences of "the the" throughout arch/powerpc.

Signed-off-by: Michael Ellerman <mpe@elle

powerpc: Fix all occurences of "the the"

Rather than waiting for the bots to fix these one-by-one, fix all
occurences of "the the" throughout arch/powerpc.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220518142629.513007-1-mpe@ellerman.id.au

show more ...

KVM: PPC: Book3s: Retire H_PUT_TCE/etc real mode handlers

LoPAPR defines guest visible IOMMU with hypercalls to use it -
H_PUT_TCE/etc. Implemented first on POWER7 where hypercalls would trap
in the

KVM: PPC: Book3s: Retire H_PUT_TCE/etc real mode handlers

LoPAPR defines guest visible IOMMU with hypercalls to use it -
H_PUT_TCE/etc. Implemented first on POWER7 where hypercalls would trap
in the KVM in the real mode (with MMU off). The problem with the real mode
is some memory is not available and some API usage crashed the host but
enabling MMU was an expensive operation.

The problems with the real mode handlers are:
1. Occasionally these cannot complete the request so the code is
copied+modified to work in the virtual mode, very little is shared;
2. The real mode handlers have to be linked into vmlinux to work;
3. An exception in real mode immediately reboots the machine.

If the small DMA window is used, the real mode handlers bring better
performance. However since POWER8, there has always been a bigger DMA
window which VMs use to map the entire VM memory to avoid calling
H_PUT_TCE. Such 1:1 mapping happens once and uses H_PUT_TCE_INDIRECT
(a bulk version of H_PUT_TCE) which virtual mode handler is even closer
to its real mode version.

On POWER9 hypercalls trap straight to the virtual mode so the real mode
handlers never execute on POWER9 and later CPUs.

So with the current use of the DMA windows and MMU improvements in
POWER9 and later, there is no point in duplicating the code.
The 32bit passed through devices may slow down but we do not have many
of these in practice. For example, with this applied, a 1Gbit ethernet
adapter still demostrates above 800Mbit/s of actual throughput.

This removes the real mode handlers from KVM and related code from
the powernv platform.

This updates the list of implemented hcalls in KVM-HV as the realmode
handlers are removed.

This changes ABI - kvmppc_h_get_tce() moves to the KVM module and
kvmppc_find_table() is static now.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506053755.3820702-1-aik@ozlabs.ru

show more ...

powerpc: Add missing headers

Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h,
asm/pci.h etc...

Include the needed headers, and remove asm/prom.h when it was
needed exclusively for

powerpc: Add missing headers

Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h,
asm/pci.h etc...

Include the needed headers, and remove asm/prom.h when it was
needed exclusively for pulling necessary headers.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu

show more ...

powerpc/powernv: Add __init attribute to eligible functions

Some functions defined in 'arch/powerpc/platforms/powernv' are
deserving of an `__init` macro attribute. These functions are only
called b

powerpc/powernv: Add __init attribute to eligible functions

Some functions defined in 'arch/powerpc/platforms/powernv' are
deserving of an `__init` macro attribute. These functions are only
called by other initialization functions and therefore should inherit
the attribute.
Also, change function declarations in header files to include `__init`.

Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-12-nick.child@ibm.com

show more ...

genirq/msi, treewide: Use a named struct for PCI/MSI attributes

The unnamed struct sucks and is in the way of further cleanups. Stick the
PCI related MSI data into a real data structure and cleanup

genirq/msi, treewide: Use a named struct for PCI/MSI attributes

The unnamed struct sucks and is in the way of further cleanups. Stick the
PCI related MSI data into a real data structure and cleanup all users.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211206210224.374863119@linutronix.de

show more ...

memblock: use memblock_free for freeing virtual pointers

Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counte

memblock: use memblock_free for freeing virtual pointers

Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()

The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.

@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)

[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au

Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

memblock: rename memblock_free to memblock_phys_free

Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical count

memblock: rename memblock_free to memblock_phys_free

Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().

The callers are updated with the below semantic patch:

@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);

Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...