arm64: dts: Fix dtc interrupt_provider warnings

[ Upstream commit 91adecf911e5df78ea3e8f866e69db2c33416a5c ]

The dtc interrupt_provider warning is off by default. Fix all the warnings
so it can be

arm64: dts: Fix dtc interrupt_provider warnings

[ Upstream commit 91adecf911e5df78ea3e8f866e69db2c33416a5c ]

The dtc interrupt_provider warning is off by default. Fix all the warnings
so it can be enabled.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-3-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

arm64: dts: broadcom: add missing space before {

Add missing whitespace between node name/label and opening {.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore

arm64: dts: broadcom: add missing space before {

Add missing whitespace between node name/label and opening {.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230705150108.293999-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>

show more ...

arm64: dts: broadcom: add missing cache properties

As all level 2 and level 3 caches are unified, add required
cache-unified properties to fix warnings like:

bcm94908.dtb: l2-cache0: 'cache-unifi

arm64: dts: broadcom: add missing cache properties

As all level 2 and level 3 caches are unified, add required
cache-unified properties to fix warnings like:

bcm94908.dtb: l2-cache0: 'cache-unified' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230421223208.115555-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: broadcom: stringray: Fix GICv3 ITS node name

The GICv3 ITS is an MSI controller, therefore its node name should be
'msi-controller'.

While we're here, fix the unit-address which shouldn

arm64: dts: broadcom: stringray: Fix GICv3 ITS node name

The GICv3 ITS is an MSI controller, therefore its node name should be
'msi-controller'.

While we're here, fix the unit-address which shouldn't have a comma.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207234709.201229-1-robh@kernel.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: broadcom: drop deprecated serial device_type

The device_type property is deprecated by Devicetree specification and
bindings do not allow it.

Signed-off-by: Krzysztof Kozlowski <krzyszt

arm64: dts: broadcom: drop deprecated serial device_type

The device_type property is deprecated by Devicetree specification and
bindings do not allow it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230123151616.369963-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: broadcom: align SMMU node names with DT schema

DT schema expects certain pattern for IOMMU/SMMU nodes:

northstar2/ns2-svk.dtb: mmu@64000000: $nodename:0: 'mmu@64000000' does not match

arm64: dts: broadcom: align SMMU node names with DT schema

DT schema expects certain pattern for IOMMU/SMMU nodes:

northstar2/ns2-svk.dtb: mmu@64000000: $nodename:0: 'mmu@64000000' does not match '^iommu@[0-9a-f]*'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Link: https://lore.kernel.org/r/20221222092456.79203-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: Update cache properties for broadcom

The DeviceTree Specification v0.3 specifies that the cache node
'compatible' and 'cache-level' properties are 'required'. Cf.
s3.8 Multi-level and Sh

arm64: dts: Update cache properties for broadcom

The DeviceTree Specification v0.3 specifies that the cache node
'compatible' and 'cache-level' properties are 'required'. Cf.
s3.8 Multi-level and Shared Cache Nodes
The 'cache-unified' property should be present if one of the
properties for unified cache is present ('cache-size', ...).

Update the Device Trees accordingly.

Acked-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20221122163208.3810985-3-pierre.gondois@arm.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: broadcom: adjust whitespace around '='

Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (sa

arm64: dts: broadcom: adjust whitespace around '='

Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: broadcom: drop useless 'dma-channels/requests' properties

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (wi

arm64: dts: broadcom: drop useless 'dma-channels/requests' properties

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless. Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.

Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220430121902.59895-6-krzysztof.kozlowski@linaro.org

show more ...

arm64: dts: stingray: Fix spi clock name

SPI clock name for pl022 is "sspclk" and not "spiclk".
Also fix below dtc warning:
clock-names:0: 'spiclk' is not one of ['SSPCLK', 'sspclk']

Signed-off-by:

arm64: dts: stingray: Fix spi clock name

SPI clock name for pl022 is "sspclk" and not "spiclk".
Also fix below dtc warning:
clock-names:0: 'spiclk' is not one of ['SSPCLK', 'sspclk']

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: broadcom: align pl330 node name with dtschema

Fixes dtbs_check warnings like:

dma@310000: $nodename:0: 'dma@310000' does not match '^dma-controller(@.*)?$'

Signed-off-by: Krzysztof K

arm64: dts: broadcom: align pl330 node name with dtschema

Fixes dtbs_check warnings like:

dma@310000: $nodename:0: 'dma@310000' does not match '^dma-controller(@.*)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: broadcom: normalize the node name of the UART devices

Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Si

arm64: dts: broadcom: normalize the node name of the UART devices

Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: broadcom: Remove SATA from Stingray

Remove SATA from Stingray as it is unsupported.

Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Si

arm64: dts: broadcom: Remove SATA from Stingray

Remove SATA from Stingray as it is unsupported.

Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: broadcom: Fix SP805 clock-names

The SP805 binding sets the name for the actual watchdog clock to
"wdog_clk" (with an underscore).

Change the name in the DTs for Broadcom platforms to ma

arm64: dts: broadcom: Fix SP805 clock-names

The SP805 binding sets the name for the actual watchdog clock to
"wdog_clk" (with an underscore).

Change the name in the DTs for Broadcom platforms to match that. The
Linux and U-Boot driver use the *first* clock for this purpose anyway,
so it does not break anything.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: Fix gpio to pinmux mapping

There are total of 151 non-secure gpio (0-150) and four
pins of pinmux (91, 92, 93 and 94) are not mapped to any
gpio pin, hence update same in DT.

Fixes: 8aa

arm64: dts: Fix gpio to pinmux mapping

There are total of 151 non-secure gpio (0-150) and four
pins of pinmux (91, 92, 93 and 94) are not mapped to any
gpio pin, hence update same in DT.

Fixes: 8aa428cc1e2e ("arm64: dts: Add pinctrl DT nodes for Stingray SOC")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: Stingray: Add NIC i2c device node

Add NIC i2c device node.

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off

arm64: dts: Stingray: Add NIC i2c device node

Add NIC i2c device node.

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: Add USB DT nodes for Stingray SoC

Add DT nodes for
- Two xHCI host controllers
- Two BDC Broadcom USB device controller
- Five USB PHY controllers

[xHCI0] [BDC0] [

arm64: dts: Add USB DT nodes for Stingray SoC

Add DT nodes for
- Two xHCI host controllers
- Two BDC Broadcom USB device controller
- Five USB PHY controllers

[xHCI0] [BDC0] [xHCI1] [BDC1]
| | | |
--------------- -----------------------
| | | | |
[SS-PHY0] [HS-PHY0] [SS-PHY1] [HS-PHY2] [HS-PHY1]

[SS-PHY0/HS-PHY0] and [SS-PHY1/HS-PHY1] are combo PHYs has one SS and
one HS PHYs. [HS-PHY2] is a single HS PHY.

xHCI use SS-PHY to detect SS devices and HS-PHY to detect HS/FS/LS
devices. BDC use SS-PHY in SS mode and HS-PHY in HS mode.

xHCI0 port1 is SS-PHY0, port2 is HS-PHY0.
xHCI1 port1 is SS-PHY1, port2 is HS-PHY2 and port3 is HS-PHY1.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: stingray: Add Stingray Thermal DT support.

Add DT nodes for thermal zones memory base address
to read temperature.

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by:

arm64: dts: stingray: Add Stingray Thermal DT support.

Add DT nodes for thermal zones memory base address
to read temperature.

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string

The 'arm,armv8' compatible string is only for software models. It adds
little value otherwise and is inconsistently used as a fal

arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string

The 'arm,armv8' compatible string is only for software models. It adds
little value otherwise and is inconsistently used as a fallback on some
platforms. Remove it from those platforms.

This fixes warnings generated by the DT schema.

Reported-by: Michal Simek <michal.simek@xilinx.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: broadcom: Fix I2C and SPI bus warnings

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb:

arm64: dts: broadcom: Fix I2C and SPI bus warnings

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27"
arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27"
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@180000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@190000: node name for SPI buses should be 'spi'

Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: stingray: add PAXC support

Add PAXC support to Broadcom Stingray SoC

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>

arm64: dts: stingray: add PAXC support

Add PAXC support to Broadcom Stingray SoC

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: set initial SR watchdog timeout to 60 seconds

Set initial Stingray watchdog timeout to 60 seconds

By the time when the userspace watchdog daemon is ready and taking control
over, the wa

arm64: dts: set initial SR watchdog timeout to 60 seconds

Set initial Stingray watchdog timeout to 60 seconds

By the time when the userspace watchdog daemon is ready and taking control
over, the watchdog timeout will then be reset to what's configured in the
daemon.

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

arm64: dts: stingray: Add OTP device node

Add OTP device node for Stingray SOC.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arm64: dts: Fix the base address of the Broadcom iProc mdio mux

Modify the base address of the mdio mux driver to point to the
start of the mdio mux block's register address space.

Signed-off-by: A

arm64: dts: Fix the base address of the Broadcom iProc mdio mux

Modify the base address of the mdio mux driver to point to the
start of the mdio mux block's register address space.

Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

arm64: dts: Stingray: Fix I2C controller interrupt type

Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
Stingray SoC.

Fixes: 1256ea18875d ("arm64: dts: Add I2C DT nodes for Sti

arm64: dts: Stingray: Fix I2C controller interrupt type

Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
Stingray SoC.

Fixes: 1256ea18875d ("arm64: dts: Add I2C DT nodes for Stingray SoC")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...