1/* 2 * BSD LICENSE 3 * 4 * Copyright(c) 2015-2017 Broadcom. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * * Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * * Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in 14 * the documentation and/or other materials provided with the 15 * distribution. 16 * * Neither the name of Broadcom nor the names of its 17 * contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33#include <dt-bindings/interrupt-controller/arm-gic.h> 34 35/ { 36 compatible = "brcm,stingray"; 37 interrupt-parent = <&gic>; 38 #address-cells = <2>; 39 #size-cells = <2>; 40 41 cpus { 42 #address-cells = <2>; 43 #size-cells = <0>; 44 45 cpu@0 { 46 device_type = "cpu"; 47 compatible = "arm,cortex-a72", "arm,armv8"; 48 reg = <0x0 0x0>; 49 enable-method = "psci"; 50 next-level-cache = <&CLUSTER0_L2>; 51 }; 52 53 cpu@1 { 54 device_type = "cpu"; 55 compatible = "arm,cortex-a72", "arm,armv8"; 56 reg = <0x0 0x1>; 57 enable-method = "psci"; 58 next-level-cache = <&CLUSTER0_L2>; 59 }; 60 61 cpu@100 { 62 device_type = "cpu"; 63 compatible = "arm,cortex-a72", "arm,armv8"; 64 reg = <0x0 0x100>; 65 enable-method = "psci"; 66 next-level-cache = <&CLUSTER1_L2>; 67 }; 68 69 cpu@101 { 70 device_type = "cpu"; 71 compatible = "arm,cortex-a72", "arm,armv8"; 72 reg = <0x0 0x101>; 73 enable-method = "psci"; 74 next-level-cache = <&CLUSTER1_L2>; 75 }; 76 77 cpu@200 { 78 device_type = "cpu"; 79 compatible = "arm,cortex-a72", "arm,armv8"; 80 reg = <0x0 0x200>; 81 enable-method = "psci"; 82 next-level-cache = <&CLUSTER2_L2>; 83 }; 84 85 cpu@201 { 86 device_type = "cpu"; 87 compatible = "arm,cortex-a72", "arm,armv8"; 88 reg = <0x0 0x201>; 89 enable-method = "psci"; 90 next-level-cache = <&CLUSTER2_L2>; 91 }; 92 93 cpu@300 { 94 device_type = "cpu"; 95 compatible = "arm,cortex-a72", "arm,armv8"; 96 reg = <0x0 0x300>; 97 enable-method = "psci"; 98 next-level-cache = <&CLUSTER3_L2>; 99 }; 100 101 cpu@301 { 102 device_type = "cpu"; 103 compatible = "arm,cortex-a72", "arm,armv8"; 104 reg = <0x0 0x301>; 105 enable-method = "psci"; 106 next-level-cache = <&CLUSTER3_L2>; 107 }; 108 109 CLUSTER0_L2: l2-cache@0 { 110 compatible = "cache"; 111 }; 112 113 CLUSTER1_L2: l2-cache@100 { 114 compatible = "cache"; 115 }; 116 117 CLUSTER2_L2: l2-cache@200 { 118 compatible = "cache"; 119 }; 120 121 CLUSTER3_L2: l2-cache@300 { 122 compatible = "cache"; 123 }; 124 }; 125 126 memory: memory@80000000 { 127 device_type = "memory"; 128 reg = <0x00000000 0x80000000 0 0x40000000>; 129 }; 130 131 psci { 132 compatible = "arm,psci-0.2"; 133 method = "smc"; 134 }; 135 136 pmu { 137 compatible = "arm,armv8-pmuv3"; 138 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; 139 }; 140 141 timer { 142 compatible = "arm,armv8-timer"; 143 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, 144 <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, 145 <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, 146 <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; 147 }; 148 149 scr { 150 compatible = "simple-bus"; 151 #address-cells = <1>; 152 #size-cells = <1>; 153 ranges = <0x0 0x0 0x61000000 0x05000000>; 154 155 ccn: ccn@0 { 156 compatible = "arm,ccn-502"; 157 reg = <0x00000000 0x900000>; 158 interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; 159 }; 160 161 gic: interrupt-controller@2c00000 { 162 compatible = "arm,gic-v3"; 163 #interrupt-cells = <3>; 164 #address-cells = <1>; 165 #size-cells = <1>; 166 ranges; 167 interrupt-controller; 168 reg = <0x02c00000 0x010000>, /* GICD */ 169 <0x02e00000 0x600000>; /* GICR */ 170 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 171 172 gic_its: gic-its@63c20000 { 173 compatible = "arm,gic-v3-its"; 174 msi-controller; 175 #msi-cells = <1>; 176 reg = <0x02c20000 0x10000>; 177 }; 178 }; 179 180 smmu: mmu@3000000 { 181 compatible = "arm,mmu-500"; 182 reg = <0x03000000 0x80000>; 183 #global-interrupts = <1>; 184 interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>, 185 <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, 186 <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, 187 <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, 188 <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, 189 <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, 190 <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>, 191 <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>, 192 <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>, 193 <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>, 194 <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>, 195 <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>, 196 <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>, 197 <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>, 198 <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>, 199 <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>, 200 <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>, 201 <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>, 202 <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>, 203 <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>, 204 <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>, 205 <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>, 206 <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>, 207 <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>, 208 <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>, 209 <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>, 210 <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>, 211 <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>, 212 <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>, 213 <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>, 214 <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>, 215 <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>, 216 <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>, 217 <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>, 218 <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>, 219 <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>, 220 <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>, 221 <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>, 222 <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>, 223 <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>, 224 <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>, 225 <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>, 226 <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>, 227 <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>, 228 <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>, 229 <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>, 230 <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>, 231 <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>, 232 <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>, 233 <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>, 234 <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>, 235 <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>, 236 <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>, 237 <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>, 238 <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>, 239 <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>, 240 <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>, 241 <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>, 242 <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>, 243 <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>, 244 <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>, 245 <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>, 246 <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, 247 <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, 248 <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>; 249 #iommu-cells = <2>; 250 }; 251 }; 252 253 crmu: crmu { 254 compatible = "simple-bus"; 255 #address-cells = <1>; 256 #size-cells = <1>; 257 ranges = <0x0 0x0 0x66400000 0x100000>; 258 259 #include "stingray-clock.dtsi" 260 261 gpio_crmu: gpio@24800 { 262 compatible = "brcm,iproc-gpio"; 263 reg = <0x00024800 0x4c>; 264 ngpios = <6>; 265 #gpio-cells = <2>; 266 gpio-controller; 267 }; 268 }; 269 270 #include "stingray-fs4.dtsi" 271 #include "stingray-sata.dtsi" 272 273 hsls { 274 compatible = "simple-bus"; 275 #address-cells = <1>; 276 #size-cells = <1>; 277 ranges = <0x0 0x0 0x68900000 0x17700000>; 278 279 #include "stingray-pinctrl.dtsi" 280 281 mdio_mux_iproc: mdio-mux@20000 { 282 compatible = "brcm,mdio-mux-iproc"; 283 reg = <0x00020000 0x250>; 284 #address-cells = <1>; 285 #size-cells = <0>; 286 287 mdio@0 { /* PCIe serdes */ 288 reg = <0x0>; 289 #address-cells = <1>; 290 #size-cells = <0>; 291 }; 292 293 mdio@2 { /* SATA */ 294 reg = <0x2>; 295 #address-cells = <1>; 296 #size-cells = <0>; 297 }; 298 299 mdio@3 { /* USB */ 300 reg = <0x3>; 301 #address-cells = <1>; 302 #size-cells = <0>; 303 }; 304 305 mdio@10 { /* RGMII */ 306 reg = <0x10>; 307 #address-cells = <1>; 308 #size-cells = <0>; 309 }; 310 }; 311 312 pwm: pwm@10000 { 313 compatible = "brcm,iproc-pwm"; 314 reg = <0x00010000 0x1000>; 315 clocks = <&crmu_ref25m>; 316 #pwm-cells = <3>; 317 status = "disabled"; 318 }; 319 320 timer0: timer@30000 { 321 compatible = "arm,sp804", "arm,primecell"; 322 reg = <0x00030000 0x1000>; 323 interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; 324 clocks = <&hsls_25m_div2_clk>, 325 <&hsls_25m_div2_clk>, 326 <&hsls_div4_clk>; 327 clock-names = "timer1", "timer2", "apb_pclk"; 328 status = "disabled"; 329 }; 330 331 timer1: timer@40000 { 332 compatible = "arm,sp804", "arm,primecell"; 333 reg = <0x00040000 0x1000>; 334 interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; 335 clocks = <&hsls_25m_div2_clk>, 336 <&hsls_25m_div2_clk>, 337 <&hsls_div4_clk>; 338 clock-names = "timer1", "timer2", "apb_pclk"; 339 }; 340 341 timer2: timer@50000 { 342 compatible = "arm,sp804", "arm,primecell"; 343 reg = <0x00050000 0x1000>; 344 interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; 345 clocks = <&hsls_25m_div2_clk>, 346 <&hsls_25m_div2_clk>, 347 <&hsls_div4_clk>; 348 clock-names = "timer1", "timer2", "apb_pclk"; 349 status = "disabled"; 350 }; 351 352 timer3: timer@60000 { 353 compatible = "arm,sp804", "arm,primecell"; 354 reg = <0x00060000 0x1000>; 355 interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; 356 clocks = <&hsls_25m_div2_clk>, 357 <&hsls_25m_div2_clk>, 358 <&hsls_div4_clk>; 359 clock-names = "timer1", "timer2", "apb_pclk"; 360 status = "disabled"; 361 }; 362 363 timer4: timer@70000 { 364 compatible = "arm,sp804", "arm,primecell"; 365 reg = <0x00070000 0x1000>; 366 interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; 367 clocks = <&hsls_25m_div2_clk>, 368 <&hsls_25m_div2_clk>, 369 <&hsls_div4_clk>; 370 clock-names = "timer1", "timer2", "apb_pclk"; 371 status = "disabled"; 372 }; 373 374 timer5: timer@80000 { 375 compatible = "arm,sp804", "arm,primecell"; 376 reg = <0x00080000 0x1000>; 377 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 378 clocks = <&hsls_25m_div2_clk>, 379 <&hsls_25m_div2_clk>, 380 <&hsls_div4_clk>; 381 clock-names = "timer1", "timer2", "apb_pclk"; 382 status = "disabled"; 383 }; 384 385 timer6: timer@90000 { 386 compatible = "arm,sp804", "arm,primecell"; 387 reg = <0x00090000 0x1000>; 388 interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; 389 clocks = <&hsls_25m_div2_clk>, 390 <&hsls_25m_div2_clk>, 391 <&hsls_div4_clk>; 392 clock-names = "timer1", "timer2", "apb_pclk"; 393 status = "disabled"; 394 }; 395 396 timer7: timer@a0000 { 397 compatible = "arm,sp804", "arm,primecell"; 398 reg = <0x000a0000 0x1000>; 399 interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; 400 clocks = <&hsls_25m_div2_clk>, 401 <&hsls_25m_div2_clk>, 402 <&hsls_div4_clk>; 403 clock-names = "timer1", "timer2", "apb_pclk"; 404 status = "disabled"; 405 }; 406 407 i2c0: i2c@b0000 { 408 compatible = "brcm,iproc-i2c"; 409 reg = <0x000b0000 0x100>; 410 #address-cells = <1>; 411 #size-cells = <0>; 412 interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; 413 clock-frequency = <100000>; 414 status = "disabled"; 415 }; 416 417 wdt0: watchdog@c0000 { 418 compatible = "arm,sp805", "arm,primecell"; 419 reg = <0x000c0000 0x1000>; 420 interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; 421 clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>; 422 clock-names = "wdogclk", "apb_pclk"; 423 }; 424 425 gpio_hsls: gpio@d0000 { 426 compatible = "brcm,iproc-gpio"; 427 reg = <0x000d0000 0x864>; 428 ngpios = <151>; 429 #gpio-cells = <2>; 430 gpio-controller; 431 interrupt-controller; 432 interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; 433 gpio-ranges = <&pinmux 0 0 16>, 434 <&pinmux 16 71 2>, 435 <&pinmux 18 131 8>, 436 <&pinmux 26 83 6>, 437 <&pinmux 32 123 4>, 438 <&pinmux 36 43 24>, 439 <&pinmux 60 89 2>, 440 <&pinmux 62 73 4>, 441 <&pinmux 66 95 28>, 442 <&pinmux 94 127 4>, 443 <&pinmux 98 139 10>, 444 <&pinmux 108 16 27>, 445 <&pinmux 135 77 6>, 446 <&pinmux 141 67 4>, 447 <&pinmux 145 149 6>, 448 <&pinmux 151 91 4>; 449 }; 450 451 i2c1: i2c@e0000 { 452 compatible = "brcm,iproc-i2c"; 453 reg = <0x000e0000 0x100>; 454 #address-cells = <1>; 455 #size-cells = <0>; 456 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; 457 clock-frequency = <100000>; 458 status = "disabled"; 459 }; 460 461 uart0: uart@100000 { 462 device_type = "serial"; 463 compatible = "snps,dw-apb-uart"; 464 reg = <0x00100000 0x1000>; 465 reg-shift = <2>; 466 clock-frequency = <25000000>; 467 interrupt-parent = <&gic>; 468 interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; 469 status = "disabled"; 470 }; 471 472 uart1: uart@110000 { 473 device_type = "serial"; 474 compatible = "snps,dw-apb-uart"; 475 reg = <0x00110000 0x1000>; 476 reg-shift = <2>; 477 clock-frequency = <25000000>; 478 interrupt-parent = <&gic>; 479 interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; 480 status = "disabled"; 481 }; 482 483 uart2: uart@120000 { 484 device_type = "serial"; 485 compatible = "snps,dw-apb-uart"; 486 reg = <0x00120000 0x1000>; 487 reg-shift = <2>; 488 clock-frequency = <25000000>; 489 interrupt-parent = <&gic>; 490 interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; 491 status = "disabled"; 492 }; 493 494 uart3: uart@130000 { 495 device_type = "serial"; 496 compatible = "snps,dw-apb-uart"; 497 reg = <0x00130000 0x1000>; 498 reg-shift = <2>; 499 clock-frequency = <25000000>; 500 interrupt-parent = <&gic>; 501 interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; 502 status = "disabled"; 503 }; 504 505 ssp0: ssp@180000 { 506 compatible = "arm,pl022", "arm,primecell"; 507 reg = <0x00180000 0x1000>; 508 interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; 509 clocks = <&hsls_div2_clk>, <&hsls_div2_clk>; 510 clock-names = "spiclk", "apb_pclk"; 511 num-cs = <1>; 512 #address-cells = <1>; 513 #size-cells = <0>; 514 status = "disabled"; 515 }; 516 517 ssp1: ssp@190000 { 518 compatible = "arm,pl022", "arm,primecell"; 519 reg = <0x00190000 0x1000>; 520 interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; 521 clocks = <&hsls_div2_clk>, <&hsls_div2_clk>; 522 clock-names = "spiclk", "apb_pclk"; 523 num-cs = <1>; 524 #address-cells = <1>; 525 #size-cells = <0>; 526 status = "disabled"; 527 }; 528 529 hwrng: hwrng@220000 { 530 compatible = "brcm,iproc-rng200"; 531 reg = <0x00220000 0x28>; 532 }; 533 534 dma0: dma@310000 { 535 compatible = "arm,pl330", "arm,primecell"; 536 reg = <0x00310000 0x1000>; 537 interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, 538 <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, 539 <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, 540 <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, 541 <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, 542 <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, 543 <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, 544 <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, 545 <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; 546 #dma-cells = <1>; 547 #dma-channels = <8>; 548 #dma-requests = <32>; 549 clocks = <&hsls_div2_clk>; 550 clock-names = "apb_pclk"; 551 iommus = <&smmu 0x6000 0x0000>; 552 }; 553 554 enet: ethernet@340000{ 555 compatible = "brcm,amac"; 556 reg = <0x00340000 0x1000>; 557 reg-names = "amac_base"; 558 dma-coherent; 559 interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; 560 status= "disabled"; 561 }; 562 563 nand: nand@360000 { 564 compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; 565 reg = <0x00360000 0x600>, 566 <0x0050a408 0x600>, 567 <0x00360f00 0x20>; 568 reg-names = "nand", "iproc-idm", "iproc-ext"; 569 interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; 570 #address-cells = <1>; 571 #size-cells = <0>; 572 brcm,nand-has-wp; 573 status = "disabled"; 574 }; 575 576 sdio0: sdhci@3f1000 { 577 compatible = "brcm,sdhci-iproc"; 578 reg = <0x003f1000 0x100>; 579 interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; 580 bus-width = <8>; 581 clocks = <&sdio0_clk>; 582 iommus = <&smmu 0x6002 0x0000>; 583 status = "disabled"; 584 }; 585 586 sdio1: sdhci@3f2000 { 587 compatible = "brcm,sdhci-iproc"; 588 reg = <0x003f2000 0x100>; 589 interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; 590 bus-width = <8>; 591 clocks = <&sdio1_clk>; 592 iommus = <&smmu 0x6003 0x0000>; 593 status = "disabled"; 594 }; 595 }; 596}; 597