docs: Move object.h overview doc comment to qom.rst

Move the whole contents of the overview doc comment from object.h
to qom.rst.

This makes the documentation source easier to read and edit, and
al

docs: Move object.h overview doc comment to qom.rst

Move the whole contents of the overview doc comment from object.h
to qom.rst.

This makes the documentation source easier to read and edit, and
also solves the backslash escaping issue at the typecasting macro
examples.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-10-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

qom: Add code block markup to all code blocks

Convert all example/codelisting markup to Sphinx code-block.

There are a few sections where backslashes at the end of lines
break code formatting. A c

qom: Add code block markup to all code blocks

Convert all example/codelisting markup to Sphinx code-block.

There are a few sections where backslashes at the end of lines
break code formatting. A comment was added noting that this is
an issue.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-8-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

qom: Indent existing code examples

This indents existing code examples that are not indented yet,
just to make future conversion to Sphinx markup easier to review.

Signed-off-by: Eduardo Habkost <e

qom: Indent existing code examples

This indents existing code examples that are not indented yet,
just to make future conversion to Sphinx markup easier to review.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-7-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

qom: Reformat section titles using Sphinx syntax

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-6-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@

qom: Reformat section titles using Sphinx syntax

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-6-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

qom: Add kernel-doc markup to introduction doc comment

Add DOC: section keyword to introduction doc comment, so it will
be rendered by kernel-doc.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.co

qom: Add kernel-doc markup to introduction doc comment

Add DOC: section keyword to introduction doc comment, so it will
be rendered by kernel-doc.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-5-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

qom: Use ``code`` Sphinx syntax where appropriate

Replace gtkdoc markup with Sphinx ``code`` syntax.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-4-ehabkos

qom: Use ``code`` Sphinx syntax where appropriate

Replace gtkdoc markup with Sphinx ``code`` syntax.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-4-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

qom: Use kernel-doc private/public tags in structs

Use kernel-doc syntax for indicating private and public struct
fields.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <202009102

qom: Use kernel-doc private/public tags in structs

Use kernel-doc syntax for indicating private and public struct
fields.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-3-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

qom: Document all function parameters in doc comments

kernel-doc requires all function parameters to be documented, so
document them all.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Messag

qom: Document all function parameters in doc comments

kernel-doc requires all function parameters to be documented, so
document them all.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-2-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

machine + QOM queue, 2020-09-22

QOM cleanups:
* Convert instance properties to class properties
(Eduard

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

machine + QOM queue, 2020-09-22

QOM cleanups:
* Convert instance properties to class properties
(Eduardo Habkost)
* simplify object_find_property / object_class_find_property
(Daniel P. Berrangé)

Deprecated feature removal:
* Drop support for invalid topologies (Igor Mammedov)

# gpg: Signature made Tue 22 Sep 2020 23:25:01 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
sifive_u: Register "start-in-flash" as class property
sifive_e: Register "revb" as class property
i440fx: Register i440FX-pcihost properties as class properties
machine: Register "memory-backend" as class property
xlnx-zcu102: Register properties as class properties
cpu/core: Register core-id and nr-threads as class properties
s390x: Register all CPU properties as class properties
cryptodev-backend: Register "chardev" as class property
cryptodev-vhost-user: Register "chardev" as class property
smp: drop support for deprecated (invalid topologies)
qom: simplify object_find_property / object_class_find_property

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qom: simplify object_find_property / object_class_find_property

When debugging QEMU it is often useful to put a breakpoint on the
error_setg_internal method impl.

Unfortunately the object_property_

qom: simplify object_find_property / object_class_find_property

When debugging QEMU it is often useful to put a breakpoint on the
error_setg_internal method impl.

Unfortunately the object_property_add / object_class_property_add
methods call object_property_find / object_class_property_find methods
to check if a property exists already before adding the new property.

As a result there are a huge number of calls to error_setg_internal
on startup of most QEMU commands, making it very painful to set a
breakpoint on this method.

Most callers of object_find_property and object_class_find_property,
however, pass in a NULL for the Error parameter. This simplifies the
methods to remove the Error parameter entirely, and then adds some
new wrapper methods that are able to raise an Error when needed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200914135617.1493072-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM queue, 2020-09-18

Fixes:
* Error value corrections (Markus Armbruster)
* Correct object_class_dynamic

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM queue, 2020-09-18

Fixes:
* Error value corrections (Markus Armbruster)
* Correct object_class_dynamic_cast_assert() documentation (Eduardo Habkost)
* Ensure objects using QEMU_ALIGNED are properly aligned (Richard Henderson)

QOM cleanups (Eduardo Habkost):
* Rename some constants
* Simplify parameters of OBJECT_DECLARE* macros
* Additional DECLARE_*CHECKER* usage
* Additional OBJECT_DECLARE_TYPE usage
* Additional OBJECT_DECLARE_SIMPLE_TYPE usage

# gpg: Signature made Fri 18 Sep 2020 21:45:29 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
Use OBJECT_DECLARE_TYPE when possible
qom: Remove module_obj_name parameter from OBJECT_DECLARE* macros
qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPE
scripts/codeconverter: Update to latest version
target/s390x: Set instance_align on S390CPU TypeInfo
target/riscv: Set instance_align on RISCVCPU TypeInfo
target/ppc: Set instance_align on PowerPCCPU TypeInfo
target/arm: Set instance_align on CPUARM TypeInfo
qom: Allow objects to be allocated with increased alignment
qom: Correct error values in two contracts
qom: Clean up object_property_get_enum()'s error value
qom: Correct object_class_dynamic_cast_assert() documentation
sifive: Use DECLARE_*CHECKER* macros
sifive: Move QOM typedefs and add missing includes
sifive_u: Rename memmap enum constants
sifive_e: Rename memmap enum constants

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qom: Remove module_obj_name parameter from OBJECT_DECLARE* macros

One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never

qom: Remove module_obj_name parameter from OBJECT_DECLARE* macros

One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.

Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.

Coccinelle patch used to convert all users of the macros:

@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);

@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPE

The requirement to specify the parent class type makes the macro
harder to use and easy to misuse (silent bugs can be introduced

qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPE

The requirement to specify the parent class type makes the macro
harder to use and easy to misuse (silent bugs can be introduced
if the wrong struct type is specified).

Simplify the macro by just not declaring any class struct,
allowing us to remove the class_size field from the TypeInfo
variables for those types.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200916182519.415636-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qom: Allow objects to be allocated with increased alignment

It turns out that some hosts have a default malloc alignment less
than that required for vectors.

We assume that, with compiler annotatio

qom: Allow objects to be allocated with increased alignment

It turns out that some hosts have a default malloc alignment less
than that required for vectors.

We assume that, with compiler annotation on CPUArchState, that we
can properly align the vector portion of the guest state. Fix the
alignment of the allocation by using qemu_memalloc when required.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200916004638.2444147-3-richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qom: Correct error values in two contracts

object_property_get_bool()'s contract claims it returns NULL on error.
Pasto; it returns false.

object_property_get_int()'s contract claims it returns "ne

qom: Correct error values in two contracts

object_property_get_bool()'s contract claims it returns NULL on error.
Pasto; it returns false.

object_property_get_int()'s contract claims it returns "negative". It
actually returns -1. All the other object_property_get_FOO()
contracts specify the exact error value, so do the same here.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200917125540.597786-3-armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qom: Clean up object_property_get_enum()'s error value

object_property_get_enum() is the only object_property_FOO() that is
documented to return an undefined value on error. It does no such
thing,

qom: Clean up object_property_get_enum()'s error value

object_property_get_enum() is the only object_property_FOO() that is
documented to return an undefined value on error. It does no such
thing, actually: it returns 0 on some errors, and -1 on others.

Needlessly complicated. Always return -1 on error, and adjust the
contract.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200917125540.597786-2-armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qom: Correct object_class_dynamic_cast_assert() documentation

object_class_dynamic_cast_assert() is not used by
INTERFACE_CHECK, remove misleading mention of that function in
the documentation.

Mes

qom: Correct object_class_dynamic_cast_assert() documentation

object_class_dynamic_cast_assert() is not used by
INTERFACE_CHECK, remove misleading mention of that function in
the documentation.

Message-Id: <20200916193101.511600-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habk

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM boilerplate cleanup

Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habkost)

QOM cleanups:
* Rename QOM macros for consistency between
TYPE_* and type checking constants (Eduardo Habkost)

QOM new macros:
* OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé)
* DECLARE_*_CHECKER macros (Eduardo Habkost)

Automated QOM boilerplate changes:
* Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost
* Automated changes to use OBJECT_DECLARE* (Eduardo Habkost)

# gpg: Signature made Thu 10 Sep 2020 19:17:49 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (33 commits)
virtio-vga: Use typedef name for instance_size
vhost-user-vga: Use typedef name for instance_size
xilinx_axienet: Use typedef name for instance_size
lpc_ich9: Use typedef name for instance_size
omap_intc: Use typedef name for instance_size
xilinx_axidma: Use typedef name for instance_size
tusb6010: Rename TUSB to TUSB6010
pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312
vfio: Rename PCI_VFIO to VFIO_PCI
usb: Rename USB_SERIAL_DEV to USB_SERIAL
sabre: Rename SABRE_DEVICE to SABRE
rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC
filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER
esp: Rename ESP_STATE to ESP
ahci: Rename ICH_AHCI to ICH9_AHCI
vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID
vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE
dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV
ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE
gpex: Fix type checking function name
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TY

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qom: Make type checker functions accept const pointers

The existing type check macros all unconditionally drop const
qualifiers from their arguments. Keep this behavior in the
macros generated by D

qom: Make type checker functions accept const pointers

The existing type check macros all unconditionally drop const
qualifiers from their arguments. Keep this behavior in the
macros generated by DECLARE_*CHECKER* by now.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200831210740.126168-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qom: DECLARE_*_CHECKERS macros

Sometimes the typedefs are buried inside another header, but
we want to benefit from the automatic definition of type cast
functions. Introduce macros that will let t

qom: DECLARE_*_CHECKERS macros

Sometimes the typedefs are buried inside another header, but
we want to benefit from the automatic definition of type cast
functions. Introduce macros that will let type checkers be
defined when typedefs are already available.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200831210740.126168-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qom: Allow class type name to be specified in OBJECT_DECLARE*

Many QOM types don't follow the Type/TypeClass pattern
on the instance/struct names. Let the class struct name
be specified in the OBJE

qom: Allow class type name to be specified in OBJECT_DECLARE*

Many QOM types don't follow the Type/TypeClass pattern
on the instance/struct names. Let the class struct name
be specified in the OBJECT_DECLARE* macros.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200831210740.126168-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qom: provide convenient macros for declaring and defining types

When creating new QOM types, there is a lot of boilerplate code that
must be repeated using a standard pattern. This is tedious to wri

qom: provide convenient macros for declaring and defining types

When creating new QOM types, there is a lot of boilerplate code that
must be repeated using a standard pattern. This is tedious to write
and liable to suffer from subtle inconsistencies. Thus it would
benefit from some simple automation.

QOM was loosely inspired by GLib's GObject, and indeed GObject suffers
from the same burden of boilerplate code, but has long provided a set of
macros to eliminate this burden in the source implementation. More
recently it has also provided a set of macros to eliminate this burden
in the header declaration.

In GLib there are the G_DECLARE_* and G_DEFINE_* family of macros
for the header declaration and source implementation respectively:

https://developer.gnome.org/gobject/stable/chapter-gobject.html
https://developer.gnome.org/gobject/stable/howto-gobject.html

This patch takes inspiration from GObject to provide the equivalent
functionality for QOM.

In the header file, instead of:

typedef struct MyDevice MyDevice;
typedef struct MyDeviceClass MyDeviceClass;

G_DEFINE_AUTOPTR_CLEANUP_FUNC(MyDeviceClass, object_unref)

#define MY_DEVICE_GET_CLASS(void *obj) \
OBJECT_GET_CLASS(MyDeviceClass, obj, TYPE_MY_DEVICE)
#define MY_DEVICE_CLASS(void *klass) \
OBJECT_CLASS_CHECK(MyDeviceClass, klass, TYPE_MY_DEVICE)
#define MY_DEVICE(void *obj)
OBJECT_CHECK(MyDevice, obj, TYPE_MY_DEVICE)

struct MyDeviceClass {
DeviceClass parent_class;
};

We now have

OBJECT_DECLARE_SIMPLE_TYPE(MyDevice, my_device, MY_DEVICE, DEVICE)

In cases where the class needs some virtual methods, it can be left
to be implemented manually using

OBJECT_DECLARE_TYPE(MyDevice, my_device, MY_DEVICE)

Note that these macros are including support for g_autoptr() for the
object types, which is something previously only supported for variables
declared as the base Object * type.

Meanwhile in the source file, instead of:

static void my_device_finalize(Object *obj);
static void my_device_class_init(ObjectClass *oc, void *data);
static void my_device_init(Object *obj);

static const TypeInfo my_device_info = {
.parent = TYPE_DEVICE,
.name = TYPE_MY_DEVICE,
.instance_size = sizeof(MyDevice),
.instance_init = my_device_init,
.instance_finalize = my_device_finalize,
.class_size = sizeof(MyDeviceClass),
.class_init = my_device_class_init,
};

static void
my_device_register_types(void)
{
type_register_static(&my_device_info);
}
type_init(my_device_register_types);

We now have

OBJECT_DEFINE_TYPE(MyDevice, my_device, MY_DEVICE, DEVICE)

Or, if a class needs to implement interfaces:

OBJECT_DEFINE_TYPE_WITH_INTERFACES(MyDevice, my_device, MY_DEVICE, DEVICE,
{ TYPE_USER_CREATABLE }, { NULL })

Or, if a class needs to be abstract

OBJECT_DEFINE_ABSTRACT_TYPE(MyDevice, my_device, MY_DEVICE, DEVICE)

IOW, in both cases the maintainer now only has to think about the
interesting part of the code which implements useful functionality
and avoids much of the boilerplate.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200723181410.3145233-3-berrange@redhat.com>
[ehabkost: Fix G_DEFINE_AUTOPTR_CLEANUP_FUNC usage]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200831210740.126168-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qom: make object_ref/unref use a void * instead of Object *.

The object_ref/unref methods are intended for use with any subclass of
the base Object. Using "Object *" in the signature is not adding a

qom: make object_ref/unref use a void * instead of Object *.

The object_ref/unref methods are intended for use with any subclass of
the base Object. Using "Object *" in the signature is not adding any
meaningful level of type safety, since callers simply use "OBJECT(ptr)"
and this expands to an unchecked cast "(Object *)".

By using "void *" we enable the object_unref() method to be used to
provide support for g_autoptr() with any subclass.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200723181410.3145233-2-berrange@redhat.com>
Message-Id: <20200831210740.126168-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-07-21' into staging

QOM patches for 2020-07-21

# gpg: Signature made Tue 21 Jul 2020 16:40:27 BST
# gpg: using RSA key

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-07-21' into staging

QOM patches for 2020-07-21

# gpg: Signature made Tue 21 Jul 2020 16:40:27 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qom-2020-07-21:
qom: Make info qom-tree sort children more efficiently
qom: Document object_get_canonical_path() returns malloced string
qom: Change object_get_canonical_path_component() not to malloc

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...