| /openbmc/linux/Documentation/arch/arm/sunxi/ |
| H A D | clocks.rst | 8 Q: Why is the main 24MHz oscillator gateable? Wouldn't that break the
11 A: The 24MHz oscillator allows gating to save power. Indeed, if gated
27 oscillator::
37 Finally you can gate the main oscillator::
|
| /openbmc/linux/arch/arm/mach-omap2/ |
| H A D | pm.c | 52 static struct omap2_oscillator oscillator = { variable
62 *tstart = oscillator.startup_time; in omap_pm_get_oscillator()
63 *tshut = oscillator.shutdown_time; in omap_pm_get_oscillator()
|
| /openbmc/linux/arch/arm64/boot/dts/marvell/ |
| H A D | armada-8020.dtsi | 18 /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
19 * in CP master is not connected (by package) to the oscillator. So
21 * oscillator so this one is let enabled.
|
| H A D | armada-8040.dtsi | 26 /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
27 * in CP master is not connected (by package) to the oscillator. So
29 * oscillator so this one is let enabled.
|
| /openbmc/linux/Documentation/devicetree/bindings/clock/ |
| H A D | nxp,lpc3220-clk.txt | 9 32768 Hz oscillator and may have one optional high frequency oscillator
10 - clock-names: list of external oscillator clock names, must contain
|
| H A D | brcm,bcm2835-cprman.txt | 8 oscillator, a level of PLL dividers that produce channels off of the
24 - External oscillator
32 Only external oscillator is required. The DSI clocks may
|
| H A D | artpec6.txt | 11 - "sys_refclk": External 50 Mhz oscillator (required)
23 - clock-names: Must include the external oscillator ("sys_refclk"). Optional
|
| H A D | vf610-clock.txt | 16 - sxosc (external crystal oscillator 32KHz, recommended)
17 - fxosc (external crystal oscillator 24MHz, recommended)
|
| H A D | st,nomadik.txt | 16 board has its own circuitry for providing this oscillator
20 oscillator
|
| /openbmc/u-boot/doc/device-tree-bindings/clock/ |
| H A D | st,stm32mp1.txt | 166 - enable the oscillator present in device tree
167 - disable HSI oscillator if the node is absent (always activated by bootrom)
171 a) for external oscillator: "clk-lse", "clk-hse"
174 - "st,bypass" Configure the oscillator bypass mode (HSEBYP, LSEBYP)
178 - "st,drive" (only for LSE) value of the drive for the oscillator
201 b) for internal oscillator: "clk-hsi"
|
| /openbmc/linux/Documentation/devicetree/bindings/spi/ |
| H A D | spi-sc18is602.txt | 11 - clock-frequency : external oscillator clock frequency. If not
15 external oscillator (SC18IS603).
|
| /openbmc/u-boot/board/freescale/mpc8313erdb/ |
| H A D | README | 65 33 - 33 MHz oscillator, boot from NOR flash
66 66 - 66 MHz oscillator, boot from NOR flash
67 NAND_33 - 33 MHz oscillator, boot from NAND flash
68 NAND_66 - 66 MHz oscillator, boot from NAND flash)
|
| /openbmc/linux/arch/arm/boot/dts/ti/omap/ |
| H A D | omap3-beagle-ab4.dts | 16 /* Unusable as clocksource because of unreliable oscillator */
21 /* Unusable as clockevent because of unreliable oscillator, allow to idle */
|
| /openbmc/linux/arch/arm/boot/dts/samsung/ |
| H A D | s3c6410-smdk6410.dts | 31 fin_pll: oscillator-0 {
38 xusbxti: oscillator-1 {
|
| H A D | s3c6410-mini6410.dts | 31 fin_pll: oscillator-0 {
38 xusbxti: oscillator-1 {
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | twl4030-power.txt | 21 configuration is used with the external oscillator being shut
23 depending on how the external oscillator is wired.
|
| /openbmc/linux/arch/arm/boot/dts/intel/pxa/ |
| H A D | pxa25x.dtsi | 27 /* timer oscillator */
28 clktimer: oscillator {
|
| /openbmc/linux/arch/arm64/boot/dts/mediatek/ |
| H A D | mt2712e.dtsi | 163 clk26m: oscillator-26m {
170 clk32k: oscillator-32k {
177 clkfpc: oscillator-50m {
184 clkaud_ext_i_0: oscillator-aud0 {
191 clkaud_ext_i_1: oscillator-aud1 {
198 clkaud_ext_i_2: oscillator-aud2 {
205 clki2si0_mck_i: oscillator-i2s0 {
212 clki2si1_mck_i: oscillator-i2s1 {
219 clki2si2_mck_i: oscillator-i2s2 {
226 clktdmin_mclk_i: oscillator-mclk {
|
| /openbmc/linux/Documentation/ABI/testing/ |
| H A D | sysfs-platform-power-on-reason | 9 "crystal oscillator failure", "brown-out reset",
|
| /openbmc/linux/arch/arm/boot/dts/arm/ |
| H A D | integratorcp.dts | 114 /* Auxilary oscillator on the core module, clocks the CLCD */
124 /* The KMI clock is the 24 MHz oscillator divided to 8MHz */
133 /* The timer clock is the 24 MHz oscillator divided to 1MHz */
|
| /openbmc/linux/arch/arm64/boot/dts/rockchip/ |
| H A D | px30-ringneck-haikou.dts | 77 // frequency. We are using a fixed-frequency oscillator.
86 sgtl5000_clk: sgtl5000-oscillator {
|
| /openbmc/linux/arch/xtensa/boot/dts/ |
| H A D | csp.dts | 35 osc: main-oscillator {
|
| /openbmc/linux/Documentation/devicetree/bindings/sound/ |
| H A D | mt8173-rt5650.txt | 17 0 : external oscillator, MCLK = 12.288M
|
| /openbmc/linux/arch/arm/boot/dts/alphascale/ |
| H A D | alphascale-asm9260.dtsi | 30 osc24m: oscillator {
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | logicpd-torpedo-som.dtsi | 34 /* fixed 26MHz oscillator */
35 hfclk_26m: oscillator {
|