| /openbmc/u-boot/tools/ |
| H A D | vybridimage.c | 49 uint8_t bit7 = (byte & (1 << 7)) ? 1 : 0; in vybridimage_sw_ecc() local
53 res |= ((bit7 ^ bit5 ^ bit4 ^ bit2 ^ bit1) << 1); in vybridimage_sw_ecc()
54 res |= ((bit7 ^ bit6 ^ bit5 ^ bit1 ^ bit0) << 2); in vybridimage_sw_ecc()
55 res |= ((bit7 ^ bit4 ^ bit3 ^ bit0) << 3); in vybridimage_sw_ecc()
|
| /openbmc/libpldm/include/libpldm/ |
| H A D | pldm_types.h | 17 uint8_t bit7 : 1; member
44 uint8_t bit7 : 1; member
66 uint8_t bit7 : 1; member
104 uint8_t bit7 : 1; member
|
| /openbmc/u-boot/board/buffalo/lsxl/ |
| H A D | kwbimage-lschl.cfg | 56 # bit7-4: 4, 5 cycle tRCD
78 # bit7-6: 0, Cs1size=nonexistent
104 # bit7: 0, (Test Mode) Normal operation
128 # bit7: 0 required (???)
139 # bit7-4: 2, 2 cycles from read command to assertion of M_ODT signal
148 # bit7-4: 5, 5 cycles from write command to de-assertion of M_ODT signal
180 # bit7-4: 0b0000, (read) M_ODT[1] is not asserted during read from DRAM
195 # bit7-4: 0b0000, internal ODT is not asserted during write to DRAM bank 0-3
|
| H A D | kwbimage-lsxhl.cfg | 56 # bit7-4: 4, 5 cycle tRCD
78 # bit7-6: 0, Cs1size=nonexistent
104 # bit7: 0, (Test Mode) Normal operation
128 # bit7: 0 required (???)
139 # bit7-4: 2, 2 cycles from read command to assertion of M_ODT signal
148 # bit7-4: 5, 5 cycles from write command to de-assertion of M_ODT signal
180 # bit7-4: 0b0000, (read) M_ODT[1] is not asserted during read from DRAM
195 # bit7-4: 0b0000, internal ODT is not asserted during write to DRAM bank 0-3
|
| /openbmc/linux/Documentation/driver-api/mtd/ |
| H A D | nand_ecc.rst | 45 byte 0: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp2 rp4 ... rp14
46 byte 1: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp1 rp2 rp4 ... rp14
47 byte 2: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp3 rp4 ... rp14
48 byte 3: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp1 rp3 rp4 ... rp14
49 byte 4: bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 rp0 rp2 rp5 ... rp14
67 Similarly cp1 is the sum of all bit1, bit3, bit5 and bit7.
70 - cp3 is the parity over bit2, bit3, bit6 and bit7.
72 - cp5 is the parity over bit4, bit5, bit6 and bit7.
161 cp1 = bit7 ^ bit5 ^ bit3 ^ bit1 ^ cp1;
163 cp3 = bit7 ^ bit6 ^ bit3 ^ bit2 ^ cp3
[all …]
|
| /openbmc/u-boot/board/d-link/dns325/ |
| H A D | kwbimage.cfg | 53 # bit7-4: 5, 6 cycle tRCD
73 # bit7-6: 0, Cs1size=nonexistent
96 # bit7: 0, (Test Mode) Normal operation
118 # bit7: 0 required
128 # bit7-4: 2, 2 cycles from read command to assertion of M_ODT signal
136 # bit7-4: 5, 5 cycles from write command to de-assertion of M_ODT signal
162 # bit7-4: 0b0000, (read) M_ODT[1] is not asserted during read from DRAM
175 # bit7-4: 0b0000, internal ODT is not asserted during write to DRAM bank 0-4
|
| /openbmc/linux/include/uapi/linux/ |
| H A D | ioam6.h | 55 __u32 bit7:1, member
104 bit7:1, member
|
| /openbmc/u-boot/board/keymile/km_arm/ |
| H A D | kwbimage-memphis.cfg | 67 # bit7-4: TRCD
87 # bit7-6: 00, Cs1size =nonexistent
123 # bit7 : 0
133 # bit7-4 : 0010, M_ODT assertion 2 cycles after read
141 # bit7-4 : 0101, M_ODT de-assertion x cycles after write
168 # bit7-4: 0, ODT0Wr, Internal ODT not asserted during write to DRAM bank0
|
| H A D | kwbimage.cfg | 64 # bit7-4: TRCD
84 # bit7-6: 00, Cs1size =nonexistent
120 # bit7 : 0
153 # bit7-4: 0, ODT0Wr, Internal ODT asserted during write to DRAM bank0
|
| /openbmc/u-boot/board/LaCie/netspace_v2/ |
| H A D | kwbimage-ns2l.cfg | 43 # bit7-4: TRCD
63 # bit7-6: 00, Cs1size =nonexistent
86 # bit7: 0, TestMode=0 normal
108 # bit7 : 1 , D2P Latency enabled
142 # bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0
|
| H A D | kwbimage.cfg | 43 # bit7-4: TRCD
63 # bit7-6: 00, Cs1size =nonexistent
86 # bit7: 0, TestMode=0 normal
108 # bit7 : 1 , D2P Latency enabled
142 # bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0
|
| H A D | kwbimage-is2.cfg | 43 # bit7-4: TRCD
63 # bit7-6: 00, Cs1size =nonexistent
86 # bit7: 0, TestMode=0 normal
108 # bit7 : 1 , D2P Latency enabled
142 # bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0
|
| /openbmc/u-boot/board/LaCie/net2big_v2/ |
| H A D | kwbimage.cfg | 43 # bit7-4: TRCD
63 # bit7-6: 00, Cs1size =nonexistent
86 # bit7: 0, TestMode=0 normal
108 # bit7 : 1 , D2P Latency enabled
142 # bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0
|
| /openbmc/u-boot/board/cloudengines/pogo_e02/ |
| H A D | kwbimage.cfg | 47 # bit7-4: TRCD
67 # bit7-6: 11, Cs1size=1Gb
90 # bit7: 0, TestMode=0 normal
112 # bit7 : 0
139 # bit7-4: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0
|
| /openbmc/u-boot/board/Marvell/openrd/ |
| H A D | kwbimage.cfg | 43 # bit7-4: TRCD
63 # bit7-6: 11, Cs1size=1Gb
86 # bit7: 0, TestMode=0 normal
108 # bit7 : 0
135 # bit7-4: 0001, (read) M_ODT[1] is asserted during read from DRAM CS0
|
| /openbmc/u-boot/board/raidsonic/ib62x0/ |
| H A D | kwbimage.cfg | 44 # bit7-4: TRCD
64 # bit7-6: 11, Cs1size (1Gb)
87 # bit7: 0x0, TestMode=0 normal
109 # bit7: 0x0,
136 # bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0
|
| /openbmc/u-boot/board/iomega/iconnect/ |
| H A D | kwbimage.cfg | 43 # bit7-4: TRCD
63 # bit7-6: 11, Cs1size (1Gb)
86 # bit7: 0x0, TestMode=0 normal
108 # bit7: 0x0,
135 # bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0
|
| /openbmc/u-boot/board/Seagate/nas220/ |
| H A D | kwbimage.cfg | 47 # bit7-4: TRCD
68 # bit7-6: 00, Cs1size =nonexistent
91 # bit7: 0, TestMode=0 normal
114 # bit7 : 0
|
| /openbmc/u-boot/board/Marvell/dreamplug/ |
| H A D | kwbimage.cfg | 44 # bit7-4: TRCD
64 # bit7-6: 10, Cs1size=1Gb
87 # bit7: 0, TestMode=0 normal
109 # bit7 : 0
|
| /openbmc/u-boot/board/Marvell/sheevaplug/ |
| H A D | kwbimage.cfg | 43 # bit7-4: TRCD
63 # bit7-6: 11, Cs1size=1Gb
86 # bit7: 0, TestMode=0 normal
108 # bit7 : 0
|
| /openbmc/u-boot/board/Seagate/dockstar/ |
| H A D | kwbimage.cfg | 46 # bit7-4: TRCD
66 # bit7-6: 00, Cs1size =nonexistent
89 # bit7: 0, TestMode=0 normal
111 # bit7 : 0
|
| /openbmc/u-boot/board/Marvell/guruplug/ |
| H A D | kwbimage.cfg | 43 # bit7-4: TRCD
63 # bit7-6: 10, Cs1size=1Gb
86 # bit7: 0, TestMode=0 normal
108 # bit7 : 0
|
| /openbmc/u-boot/board/Seagate/goflexhome/ |
| H A D | kwbimage.cfg | 49 # bit7-4: TRCD
69 # bit7-6: 00, Cs1size =nonexistent
92 # bit7: 0, TestMode=0 normal
114 # bit7 : 0
|
| /openbmc/u-boot/board/Synology/ds109/ |
| H A D | kwbimage.cfg | 47 # bit7-4: TRCD
67 # bit7-6: 10, Cs1size=1Gb
90 # bit7: 0, TestMode=0 normal
112 # bit7 : 0
|
| /openbmc/linux/Documentation/leds/ |
| H A D | leds-mlxcpld.rst | 54 [bit7,bit6,bit5,bit4]:
99 [bit7,bit6,bit5,bit4]:
|