Searched refs:speed (Results 2951 – 2975 of 3127) sorted by relevance
1...<<111112113114115116117118119120>>...126
1089 if (dev->speed < USB_SPEED_SUPER) in usb_set_isoch_delay()
427 for the physical port only (link speed, topology setting, etc). This
1529 cmd->base.speed = 10000; in xgmac_ethtool_get_link_ksettings()
1104 dev->speed == USB_SPEED_HIGH) { in usbhid_start()
1004 cpu_speed_grade: speed-grade@10 {
1179 cpu_speed_grade: speed-grade@10 {
428 behind the IOC3 device on those systems. Maximum baud speed is
1212 max-speed = <2000000>;
1288 max-speed = <3000000>;
752 supported = (ecmd.speed == SPEED_1000) ? in ax88179_chk_eee()
441 based on this design, which supports USB 2.0 high speed.
1786 if (port->port.dev->speed == USB_SPEED_LOW) { in ohci_attach()
1936 dst->_present.speed = 1; in ethtool_linkmodes_get_rsp_parse()1937 dst->speed = mnl_attr_get_u32(attr); in ethtool_linkmodes_get_rsp_parse()2084 if (req->_present.speed) in ethtool_linkmodes_set()2085 mnl_attr_put_u32(nlh, ETHTOOL_A_LINKMODES_SPEED, req->speed); in ethtool_linkmodes_set()
3426 maximum-speed = "high-speed";3686 maximum-speed = "super-speed";
972 max-speed = <3200000>;
874 | (usb_dev->speed == USB_SPEED_LOW) << 13 in ep_add_ed()
606 * CPU (type and speed)
277 s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex);
370 "The governor \"%s\" may decide which speed to use\n"
592 cpu_speed_grade: speed-grade@10 { /* 0x440 */
655 there are more than one event using this action, the maximum speed derived from
2083 if (phy && (phy->speed == SPEED_1000)) { in netcp_ethss_link_state_action()2086 } else if (phy && (phy->speed == SPEED_10000)) { in netcp_ethss_link_state_action()
499 linfo->link.s.speed, in print_link_info()3000 ivi->max_tx_rate = lio->linfo.link.s.speed; in liquidio_get_vf_config()
178 i2c_udelay= Allow reduce I2C speed. Default is 5 usecs180 maximum supported speed by kernel bitbang
465 switch (link->speed) { in qedf_update_link_speed()599 link->speed / 1000); in qedf_link_update()