Home
last modified time | relevance | path

Searched +full:1 +full:kb (Results 1 – 25 of 1019) sorted by relevance

12345678910>>...41

/openbmc/linux/tools/testing/selftests/proc/
H A Dproc-empty-vm.c47 * 1: vsyscall VMA is --xp vsyscall=xonly
64 "Size: 4 kB\n"
65 "KernelPageSize: 4 kB\n"
66 "MMUPageSize: 4 kB\n"
67 "Rss: 0 kB\n"
68 "Pss: 0 kB\n"
69 "Pss_Dirty: 0 kB\n"
70 "Shared_Clean: 0 kB\n"
71 "Shared_Dirty: 0 kB\n"
72 "Private_Clean: 0 kB\n"
[all …]
/openbmc/linux/tools/testing/selftests/tc-testing/tc-tests/actions/
H A Dpolice.json13 1,
17 "cmdUnderTest": "$TC actions add action police rate 1kbit burst 10k index 1",
20 "matchPattern": "action order [0-9]*: police 0x1 rate 1Kbit burst 10Kb",
21 "matchCount": "1",
37 1,
46 "matchCount": "1",
62 1,
66 "cmdUnderTest": "$TC actions add action police rate 90kbit burst 10k mtu 1k index 98",
69 "matchPattern": "action order [0-9]*: police 0x62 rate 90Kbit burst 10Kb mtu 1Kb",
70 "matchCount": "1",
[all …]
/openbmc/u-boot/arch/arm/mach-uniphier/boot-device/
H A Dboot-device-pxs2.c15 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"},
16 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"},
17 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
18 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"},
19 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
20 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"},
21 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
22 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"},
23 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"},
24 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
[all …]
H A Dboot-device-ld11.c15 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"},
16 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"},
17 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"},
18 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
19 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"},
20 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
21 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"},
22 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
23 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"},
24 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 4)"},
[all …]
H A Dboot-device-ld4.c16 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"},
17 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"},
18 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
19 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"},
20 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
21 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"},
22 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
23 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"},
24 {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"},
25 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"},
[all …]
H A Dboot-device-pro5.c15 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"},
16 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
17 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"},
18 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"},
19 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"},
20 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"},
21 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"},
22 {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128MB, Addr 4)"},
28 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
29 {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"},
[all …]
/openbmc/u-boot/board/freescale/t208xrdb/
H A DREADME13 - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
20 - Up to eight 1 Gbps Ethernet MACs
40 1G Ethernet numbers: 8 6
52 - SerDes-1 Lane A-B: to two 10G XFI fiber (MAC9 & MAC10)
53 - SerDes-1 Lane C-D: to two 10G Base-T (MAC1 & MAC2)
54 - SerDes-1 Lane E-H: to PCIe Goldfinger (PCIe4 x4, Gen3)
59 - Two on-board 10M/100M/1G RGMII ethernet ports
70 - NAND: 1GB 8-bit NAND flash
89 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
90 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
[all …]
/openbmc/u-boot/board/freescale/t102xrdb/
H A DREADME14 - two e5500 cores, each with a private 256 KB L2 cache
19 - 256 KB shared L3 CoreNet platform cache (CPC)
33 - Four 1 Gbps Ethernet controllers
79 - Two on-board 10M/100M/1G bps RGMII ethernet ports
88 - NAND: 1GB 8-bit NAND flash
110 - one 1G RGMII port on-board(RTL8211FS PHY)
111 - one 1G SGMII port on-board(RTL8211FS PHY)
129 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
130 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
132 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
[all …]
/openbmc/u-boot/board/qualcomm/dragonboard820c/
H A Dreadme.txt11 - Environment in EXT4 partition 1 in SD card (check defconfig for details)
19 1) Install mkbootimg and dtbTool from Codeaurora:
68 1) create an EXT4 partition on the SD card (must be partition #1)
95 prompt 1
114 the SD card EXT4 partition#1 should contain:
137 S - OEM Config Row 1 @ 0x00074190 = 0x0000000000000000
139 S - Feature Config Row 1 @ 0x000741a8 = 0x00fff00001ffffff
159 B - 410713 - CDT Version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
177 B - 522404 - DDR ID, Rank 0, Rank 1, 0x6, 0x300, 0x300
203 S - Flash Throughput, 94000 KB/s (2959024 Bytes, 31250 us)
[all …]
/openbmc/u-boot/board/freescale/t104xrdb/
H A DREADME45 - Four e5500 cores, each with a private 256 KB L2 cache
46 - 256 KB shared L3 CoreNet platform cache (CPC)
61 - Four 1 Gbps Ethernet controllers
97 1: None
109 - NAND flash: 1GB 8-bit NAND flash
112 - Two on-board RGMII 10/100/1G ethernet ports.
132 1, 2, 3, 4 : PCIe x4 slot
141 - NAND flash: 1GB 8-bit NAND flash
144 - Two on-board RGMII 10/100/1G ethernet ports.
168 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
[all …]
/openbmc/linux/tools/testing/selftests/bpf/prog_tests/
H A Dxdp_adjust_tail.c17 .repeat = 1, in test_xdp_adjust_tail_shrink()
52 .repeat = 1, in test_xdp_adjust_tail_grow()
90 .repeat = 1, in test_xdp_adjust_tail_grow2()
102 memset(buf, 1, sizeof(buf)); in test_xdp_adjust_tail_grow2()
113 ASSERT_EQ(buf[0], 1, "case-64-data buf[0]"); /* 0-63 memset to 1 */ in test_xdp_adjust_tail_grow2()
114 ASSERT_EQ(buf[63], 1, "case-64-data buf[63]"); in test_xdp_adjust_tail_grow2()
117 ASSERT_EQ(buf[128], 1, "case-64-data buf[128]"); /* 128-191 memset to 1 */ in test_xdp_adjust_tail_grow2()
118 ASSERT_EQ(buf[191], 1, "case-64-data buf[191]"); in test_xdp_adjust_tail_grow2()
166 if (!ASSERT_OK_PTR(buf, "alloc buf 9Kb")) in test_xdp_adjust_frags_tail_shrink()
179 ASSERT_OK(err, "9Kb-10b"); in test_xdp_adjust_frags_tail_shrink()
[all …]
/openbmc/u-boot/board/freescale/t102xqds/
H A DREADME14 - two e5500 cores, each with a private 256 KB L2 cache
19 - 256 KB shared L3 CoreNet platform cache (CPC)
33 - Four 1 Gbps Ethernet controllers
79 - PCI Express: supports Gen 1 and Gen 2
80 - SGMII 1G and SGMII 2.5G
100 - Two on-board RGMII 10M/100M/1G ethernet ports.
102 - Four SGMII interface supporting 1Gbps
115 - Software programmable in 1 MHz increments from 1-200 MHz.
142 - Support for SD slots for: SD, SDHC (1x, 4x, 8x) and MMC.
155 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB
[all …]
/openbmc/u-boot/board/freescale/t208xqds/
H A DREADME13 - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
20 - Up to eight 1 Gbps Ethernet MACs
40 1G Ethernet numbers: 8 6
57 - Two 1Gbps RGMII on-board ports
59 - 1Gbps/2.5Gbps SGMII Riser card
69 - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
89 - XFI is supported on T2080QDS through Lane A/B/C/D on Serdes 1 routed to
107 1000BASE-KX(1G-KX):
108 - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane
109 runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane
[all …]
/openbmc/linux/arch/s390/crypto/
H A Dpaes_s390.c58 static inline int _key_to_kb(struct key_blob *kb, in _key_to_kb() argument
76 memset(kb->keybuf, 0, sizeof(kb->keybuf)); in _key_to_kb()
77 h = (struct clearkey_header *) kb->keybuf; in _key_to_kb()
81 memcpy(kb->keybuf + sizeof(*h), key, keylen); in _key_to_kb()
82 kb->keylen = sizeof(*h) + keylen; in _key_to_kb()
83 kb->key = kb->keybuf; in _key_to_kb()
87 if (keylen <= sizeof(kb->keybuf)) in _key_to_kb()
88 kb->key = kb->keybuf; in _key_to_kb()
90 kb->key = kmalloc(keylen, GFP_KERNEL); in _key_to_kb()
91 if (!kb->key) in _key_to_kb()
[all …]
/openbmc/u-boot/board/freescale/t1040qds/
H A DREADME14 - Four e5500 cores, each with a private 256 KB L2 cache
15 - 256 KB shared L3 CoreNet platform cache (CPC)
30 - Four 1 Gbps Ethernet controllers
56 — PCI Express: supporting Gen 1 and Gen 2;
70 - Two on-board RGMII 10/100/1G ethernet ports.
85 - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC
99 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB
100 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
102 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
103 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
[all …]
/openbmc/linux/tools/testing/selftests/tc-testing/tc-tests/qdiscs/
H A Dred.json15 …"cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root red limit 1M avpkt 1500 min 100K max 300K…
18 "matchPattern": "qdisc red 1: root .* limit 1Mb min 100Kb max 300Kb $",
19 "matchCount": "1",
21 "$TC qdisc del dev $DUMMY handle 1: root",
38 …"cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root red adaptive limit 1M avpkt 1500 min 100K…
41 "matchPattern": "qdisc red 1: root .* limit 1Mb min 100Kb max 300Kb adaptive $",
42 "matchCount": "1",
44 "$TC qdisc del dev $DUMMY handle 1: root",
61 …"cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root red ecn limit 1M avpkt 1500 min 100K max …
64 "matchPattern": "qdisc red 1: root .* limit 1Mb min 100Kb max 300Kb ecn $",
[all …]
/openbmc/qemu/tests/qemu-iotests/
H A D26525 status=1 # failure is the default!
31 trap "_cleanup; exit \$status" 0 1 2 3 15
45 _make_test_img -o 'cluster_size=4096' 1M
46 (for ((kb = 1024 - 4; kb >= 0; kb -= 4)); do \
47 echo "aio_write -P 42 $((kb + 1))k 2k"; \
53 (for ((kb = 0; kb < 1024; kb += 4)); do \
54 echo "read -P 0 ${kb}k 1k"; \
55 echo "read -P 42 $((kb + 1))k 2k"; \
56 echo "read -P 0 $((kb + 3))k 1k"; \
61 if [ ${PIPESTATUS[1]} = 0 ]; then
/openbmc/linux/arch/x86/pci/
H A Dce4100.c45 #define KB (1024) macro
46 #define SIZE_TO_MASK(size) (~(size - 1))
57 pci_direct_conf1.read(0, 1, reg->dev_func, reg->reg, 4, in reg_init()
74 pci_direct_conf1.read(0, 1, PCI_DEVFN(14, 0), 0x10, 4, in sata_reg_init()
106 DEFINE_REG(2, 1, 0x10, (64*KB), reg_init, reg_read, reg_write)
107 DEFINE_REG(3, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
108 DEFINE_REG(4, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
109 DEFINE_REG(4, 1, 0x10, (128*KB), reg_init, reg_read, reg_write)
110 DEFINE_REG(6, 0, 0x10, (512*KB), reg_init, reg_read, reg_write)
111 DEFINE_REG(6, 1, 0x10, (512*KB), reg_init, reg_read, reg_write)
[all …]
/openbmc/u-boot/doc/
H A DREADME.b4860qds56 . Six 1G/2.5-Gbit Ethernet controllers for network communications
69 - SerDes 1 multiplexing: Two Vitesse (transmit and receive path) cross-point 16x16 switch
90 - 2 KB internal memory space including
108 1. Less e6500 cores: 1 cluster with 2 e6500 cores
109 2. Less SC3900 cores/clusters: 1 cluster with 2 SC3900 cores per cluster.
135 SW2 [1.1] = 1
136 SW3 [1:4] = 0001
138 SW1 [1.1] = 1
140 SW3 [1:4] = 1000.
160 SW2 [1.1] = 1
[all …]
H A DREADME.N121327 - 4KB & 1MB.
28 - 8KB & 1MB.
33 - Cache size: 8KB/16KB/32KB/64KB.
38 - Size: 4KB to 1MB.
39 - Bank numbers: 1 or 2.
40 - Optional 1D/2D DMA engine.
44 - Synchronous/Asynchronous AHB bus: 0, 1 or 2 ports.
46 (HSMP): 0, 1 or 2 ports.
/openbmc/linux/drivers/w1/slaves/
H A DKconfig3 # 1-wire slaves configuration
6 menu "1-wire Slaves"
11 Say Y here if you want to connect 1-wire thermal sensors to your
17 Say Y here if you want to connect 1-wire
23 Say Y or M here if you want to use a DS2405 1-wire
31 Say Y here if you want to use a 1-wire
47 Say Y here if you want to use a 1-wire
54 Say Y or M here if you want to use a 1-wire
59 tristate "Counter 1-wire device (DS2423)"
66 Say Y here if you want to use a 1-wire
[all …]
/openbmc/linux/fs/btrfs/tests/
H A Dfree-space-tests.c41 return -1; in test_extents()
71 return -1; in test_extents()
76 return -1; in test_extents()
81 return -1; in test_extents()
97 ret = test_add_free_space_entry(cache, 0, SZ_4M, 1); in test_bitmaps()
111 return -1; in test_bitmaps()
114 ret = test_add_free_space_entry(cache, 0, SZ_4M, 1); in test_bitmaps()
134 SZ_4M, 1); in test_bitmaps()
149 return -1; in test_bitmaps()
171 ret = test_add_free_space_entry(cache, SZ_4M, SZ_1M, 1); in test_bitmaps_and_extents()
[all …]
/openbmc/u-boot/include/configs/
H A Dxtfpga.h61 /* Lx60 can only map 128kb memory (instead of 256kb) when running under OCD */
63 # define CONFIG_SYS_MONITOR_LEN 0x00020000 /* 128KB */
65 # define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256KB */
68 #define CONFIG_SYS_MALLOC_LEN (256 << 10) /* heap 256KB */
139 #define FPGAREG_MTH_SHIFT 24 /* BCD month 1..12 */
142 #define FPGAREG_DAY_SHIFT 16 /* BCD day 1..31 */
153 * DIP switch (left=sw1=lsb=bit0, right=sw8=msb=bit7; off=0, on=1):
156 * Bit 7 maps the first 128KB of ROM address space at CONFIG_SYS_ROM_BASE to
157 * the base of flash * (when on/1) or to the base of RAM (when off/0).
164 #define FPGAREG_BOOT_WIDTH 1
[all …]
/openbmc/u-boot/board/gateworks/gw_ventana/
H A DREADME12 1. Secondary Program Loader (SPL)
70 specified by providing kobs-ng with the --search_exponent=1 argument). Once in
74 kobs-ng init -v -x --search_exponent=1 SPL
88 Ventana > setenv mtdparts mtdparts=nand:14m(spl),2m(uboot),1m(env),-(rootfs)
99 - env: 1M
111 MMC the SPL will be loaded from offset 0x400 (1KB). Once the SPL is
112 booted, it will load and execute U-Boot (u-boot.img) from offset 69KB
126 # zero out 1MB of device
127 sudo dd if=/dev/zero of=$DEV count=1 bs=1M oflag=sync status=none && sync
128 # copy SPL to 1KB offset
[all …]
/openbmc/u-boot/board/freescale/t4qds/
H A DREADME33 increases by 1 clock.
47 Support two on-board RGMII 10/100/1G ethernet ports.
60 - Software selectable in 1MHz increments from 1-200MHz.
111 0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO
114 0x0_ffdf_0000 (0xf_ffdf_0000) - 0x0_ffdf_03ff 4KB QIXIS
115 0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores
147 and copy U-Boot(768 KB) from NAND/SD device to DDR.
158 |SecureBoot header | 0xFFFC0000 (32KB) |
160 |GD, BD | 0xFFFC8000 (4KB) |
162 |ENV | 0xFFFC9000 (8KB) |
[all …]

12345678910>>...41