Lines Matching +full:1 +full:kb

13  - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
20    - Up to eight 1 Gbps Ethernet MACs
40   1G Ethernet numbers:  8	 6
57  - Two 1Gbps RGMII on-board ports
59  - 1Gbps/2.5Gbps SGMII Riser card
69  - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
89  - XFI is supported on T2080QDS through Lane A/B/C/D on Serdes 1 routed to
107 1000BASE-KX(1G-KX):
108  - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane
109  runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane
110  in 1G-KX mode, need to set corresponding bit in SerDes Protocol Configuration
111  Register 1 (PCCR1), and U-Boot fixup the dtb for kernel to do proper
113  Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC
114  1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a
115  MAC to use 1G-KX mode, set its' corresponding env in "fsl_1gkx", 'fm1_1g1'
116  stands for MAC 1, 'fm1_1g2' stands for MAC 2, etc.
118  hwconfig, MAC 1/2/5/6/9/10 will use 1G-KX mode.
124 0xF_FFDF_0000  0xF_FFDF_0FFF    IFC - CPLD			4KB
125 0xF_FF80_0000  0xF_FF80_FFFF    IFC - NAND Flash		64KB
127 0xF_F803_0000  0xF_F803_FFFF    PCI Express 4 I/O Space		64KB
128 0xF_F802_0000  0xF_F802_FFFF    PCI Express 3 I/O Space		64KB
129 0xF_F801_0000  0xF_F801_FFFF    PCI Express 2 I/O Space		64KB
130 0xF_F800_0000  0xF_F800_FFFF    PCI Express 1 I/O Space		64KB
138 0xC_0000_0000  0xC_1FFF_FFFF    PCI Express 1 Mem Space		512MB
145 0xEFF40000	0xEFFFFFFF	U-Boot (current bank)		768KB
146 0xEFF20000	0xEFF3FFFF	U-Boot env (current bank)	128KB
147 0xEFF00000	0xEFF1FFFF	FMAN Ucode (current bank)	128KB
149 0xEC800000	0xEC8FFFFF	Hardware device tree (alt bank)	1MB
150 0xEC020000	0xEC7FFFFF	Linux.uImage (alt bank)		7MB + 875KB
151 0xEC000000	0xEC01FFFF	RCW (alt bank)			128KB
152 0xEBF40000	0xEBFFFFFF	U-Boot (alt bank)		768KB
153 0xEBF20000	0xEBF3FFFF	U-Boot env (alt bank)		128KB
154 0xEBF00000	0xEBF1FFFF	FMAN ucode (alt bank)		128KB
156 0xE8800000	0xE88FFFFF	Hardware device tree (cur bank)	1MB
157 0xE8020000	0xE86FFFFF	Linux.uImage (current bank)	7MB + 875KB
158 0xE8000000	0xE801FFFF	RCW (current bank)		128KB
164 1. NOR boot:
171 	set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot
176 	by DIP-switch: set SW6[1:4] = '0100'
180 	by DIP-Switch: set SW6[1:4] = '0000'
190 	set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot
201 	set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
212 	set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
219 and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR.
230 |SecureBoot header | 0xFFFC0000 (32KB)		|
232 |GD, BD		   | 0xFFFC8000 (4KB)		|
234 |ENV		   | 0xFFFC9000 (8KB)		|
236 |HEAP		   | 0xFFFCB000 (50KB)		|
238 |STACK		   | 0xFFFD8000 (22KB)		|
240 |U-Boot SPL	   | 0xFFFD8000 (160KB)		|
246 0x000000	0x0FFFFF	U-Boot img	1MB  (2 blocks)
247 0x100000	0x17FFFF	U-Boot env	512KB (1 block)
248 0x180000	0x1FFFFF	FMAN ucode	512KB (1 block)
254 0x008		2048		U-Boot img	1MB
255 0x800		0016		U-Boot env	8KB
256 0x820		0128		FMAN ucode	64KB
262 0x000000	0x0FFFFF	U-Boot img	1MB
263 0x100000	0x101FFF	U-Boot env	8KB
264 0x110000	0x11FFFF	FMAN ucode	64KB
279 1. NOR Boot
286 1. CONFIG_DEFAULT_DEVICE_TREE="t2080qds" (Change default device tree name if required)
292 1. use 'u-boot-with-dtb.bin' for NOR boot.