Lines Matching +full:1 +full:kb
14 - two e5500 cores, each with a private 256 KB L2 cache
19 - 256 KB shared L3 CoreNet platform cache (CPC)
33 - Four 1 Gbps Ethernet controllers
79 - PCI Express: supports Gen 1 and Gen 2
80 - SGMII 1G and SGMII 2.5G
100 - Two on-board RGMII 10M/100M/1G ethernet ports.
102 - Four SGMII interface supporting 1Gbps
115 - Software programmable in 1 MHz increments from 1-200 MHz.
142 - Support for SD slots for: SD, SDHC (1x, 4x, 8x) and MMC.
155 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB
156 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
158 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
159 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
160 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
168 0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB
175 0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
176 0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
177 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
178 0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB
180 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
181 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
182 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
183 0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB
184 0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB
185 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
186 0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB
188 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB
189 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
190 0xE8000000 0xE801FFFF RCW (current bank) 128KB
195 SRDS_PRTCL_S1 SD1_REF_CLK1 SD1_REF_CLK2 SW4[1:4]
212 1. NOR boot:
220 set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot
225 via DIP-switch: set SW6[1:4] = '0100'
229 via DIP-Switch: set SW6[1:4] = '0000'
239 set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot
250 set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
261 set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
276 and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR.
287 |SecureBoot header | 0xFFFC0000 (32KB) |
289 |GD, BD | 0xFFFC8000 (4KB) |
291 |ENV | 0xFFFC9000 (8KB) |
293 |HEAP | 0xFFFCB000 (30KB) |
295 |STACK | 0xFFFD8000 (22KB) |
297 |U-Boot SPL | 0xFFFD8000 (160KB) |
303 0x000000 0x0FFFFF U-Boot 1MB
304 0x100000 0x15FFFF U-Boot env 8KB
305 0x160000 0x17FFFF FMAN Ucode 128KB
306 0x180000 0x19FFFF QE Firmware 128KB
312 0x008 2048 U-Boot img 1MB
313 0x800 0016 U-Boot env 8KB
314 0x820 0256 FMAN Ucode 128KB
315 0x920 0256 QE Firmware 128KB
321 0x000000 0x0FFFFF U-Boot img 1MB
322 0x100000 0x101FFF U-Boot env 8KB
323 0x110000 0x12FFFF FMAN Ucode 128KB
324 0x130000 0x14FFFF QE Firmware 128KB