Home
last modified time | relevance | path

Searched +full:0 +full:x01400000 (Results 1 – 25 of 31) sorted by relevance

12

/openbmc/linux/arch/arm/boot/dts/nxp/mxs/
H A Dimx28-m28cu3.dts15 reg = <0x40000000 0x08000000>;
21 brightness-levels = <0 4 8 16 32 64 128 255>;
28 pinctrl-0 = <&led_pins_gpio>;
32 gpios = <&gpio2 26 0>;
38 gpios = <&gpio2 24 0>;
43 reg_3p3v: regulator-0 {
56 gpio = <&gpio3 29 0>;
64 gpio = <&gpio2 19 0>;
72 gpio = <&gpio3 8 0>;
79 pinctrl-0 = <&auart0_2pins_a>;
[all …]
/openbmc/linux/Documentation/devicetree/bindings/clock/
H A Dqcom,gcc-sm6125.yaml47 reg = <0x01400000 0x1f0000>;
H A Dqcom,gcc-sm6115.yaml47 reg = <0x01400000 0x1f0000>;
H A Dqcom,gcc-qcm2290.yaml47 reg = <0x01400000 0x1f0000>;
H A Dqcom,sm6375-gcc.yaml42 reg = <0x01400000 0x1f0000>;
/openbmc/linux/Documentation/devicetree/bindings/media/
H A Dallwinner,sun8i-h3-deinterlace.yaml72 reg = <0x01400000 0x20000>;
/openbmc/linux/arch/powerpc/boot/
H A Dof.c17 #define PROG_START 0x01400000 /* only used on 64-bit systems */
19 #define ONE_MB 0x100000
30 unsigned long addr = 0; in of_try_claim()
32 if (claim_base == 0) in of_try_claim()
37 printf(" trying: 0x%08lx\n\r", claim_base); in of_try_claim()
39 addr = (unsigned long) of_claim(claim_base, size, 0); in of_try_claim()
43 if (addr == 0) in of_try_claim()
78 if (a1 && a2 && a2 != 0xdeadbeef) { in of_platform_init()
/openbmc/linux/arch/powerpc/boot/dts/fsl/
H A Dp1010rdb.dtsi36 nor@0,0 {
40 reg = <0x0 0x0 0x2000000>;
46 reg = <0x00040000 0x00040000>;
52 reg = <0x00080000 0x00700000>;
58 reg = <0x00800000 0x01400000>;
66 reg = <0x01f00000 0x00100000>;
72 ifc_nand: nand@1,0 {
76 reg = <0x1 0x0 0x10000>;
79 cpld@3,0 {
83 reg = <0x3 0x0 0x0000020>;
[all …]
/openbmc/u-boot/include/
H A Dfsl_qe.h20 #define QE_DATAONLY_BASE 0
37 #define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */
38 #define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */
39 #define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */
40 #define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */
50 #define QE_CR_FLG 0x00010000
51 #define QE_RESET 0x80000000
52 #define QE_INIT_TX_RX 0x00000000
53 #define QE_INIT_RX 0x00000001
54 #define QE_INIT_TX 0x00000002
[all …]
/openbmc/linux/arch/arm/boot/dts/allwinner/
H A Dsun8i-h3.dtsi72 #size-cells = <0>;
74 cpu0: cpu@0 {
77 reg = <0>;
155 reg = <0x01400000 0x20000>;
168 reg = <0x01c00000 0x1000>;
175 reg = <0x01d00000 0x80000>;
178 ranges = <0 0x01d00000 0x80000>;
180 ve_sram: sram-section@0 {
183 reg = <0x000000 0x80000>;
190 reg = <0x01c0e000 0x1000>;
[all …]
/openbmc/linux/arch/powerpc/boot/dts/
H A Dyosemite.dts19 dcr-parent = <&{/cpus/cpu@0}>;
32 #size-cells = <0>;
34 cpu@0 {
37 reg = <0x00000000>;
38 clock-frequency = <0>; /* Filled in by zImage */
39 timebase-frequency = <0>; /* Filled in by zImage */
51 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
57 cell-index = <0>;
58 dcr-reg = <0x0c0 0x009>;
59 #address-cells = <0>;
[all …]
H A Dredwood.dts18 dcr-parent = <&{/cpus/cpu@0}>;
27 #size-cells = <0>;
29 cpu@0 {
32 reg = <0x00000000>;
33 clock-frequency = <0>; /* Filled in by U-Boot */
34 timebase-frequency = <0>; /* Filled in by U-Boot */
46 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
52 cell-index = <0>;
53 dcr-reg = <0x0c0 0x009>;
54 #address-cells = <0>;
[all …]
H A Deiger.dts18 dcr-parent = <&{/cpus/cpu@0}>;
31 #size-cells = <0>;
33 cpu@0 {
36 reg = <0x00000000>;
37 clock-frequency = <0>; /* Filled in by U-Boot */
38 timebase-frequency = <0>; /* Filled in by U-Boot */
50 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
56 cell-index = <0>;
57 dcr-reg = <0x0c0 0x009>;
58 #address-cells = <0>;
[all …]
H A Dcanyonlands.dts18 dcr-parent = <&{/cpus/cpu@0}>;
29 #size-cells = <0>;
31 cpu@0 {
34 reg = <0x00000000>;
35 clock-frequency = <0>; /* Filled in by U-Boot */
36 timebase-frequency = <0>; /* Filled in by U-Boot */
49 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
55 cell-index = <0>;
56 dcr-reg = <0x0c0 0x009>;
57 #address-cells = <0>;
[all …]
H A Dglacier.dts18 dcr-parent = <&{/cpus/cpu@0}>;
31 #size-cells = <0>;
33 cpu@0 {
36 reg = <0x00000000>;
37 clock-frequency = <0>; /* Filled in by U-Boot */
38 timebase-frequency = <0>; /* Filled in by U-Boot */
51 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
57 cell-index = <0>;
58 dcr-reg = <0x0c0 0x009>;
59 #address-cells = <0>;
[all …]
/openbmc/linux/drivers/net/wireless/ath/ath11k/
H A Dcore.c27 MODULE_PARM_DESC(crypto_mode, "crypto mode: 0-hardware, 1-software");
33 "Datapath frame mode (0: raw, 1: native wifi (default), 2: ethernet)");
42 .name = "ipq8074 hw2.0",
44 .dir = "IPQ8074/hw2.0",
49 .bdf_addr = 0x4B0C0000,
75 .summary_pad_sz = 0,
92 .fw_mem_mode = 0,
127 .name = "ipq6018 hw1.0",
129 .dir = "IPQ6018/hw1.0",
134 .bdf_addr = 0x4ABC0000,
[all …]
/openbmc/linux/include/video/
H A Dnewport.h34 #define DM1_PLANES 0x00000007
35 #define DM1_NOPLANES 0x00000000
36 #define DM1_RGBPLANES 0x00000001
37 #define DM1_RGBAPLANES 0x00000002
38 #define DM1_OLAYPLANES 0x00000004
39 #define DM1_PUPPLANES 0x00000005
40 #define DM1_CIDPLANES 0x00000006
42 #define NPORT_DMODE1_DDMASK 0x00000018
43 #define NPORT_DMODE1_DD4 0x00000000
44 #define NPORT_DMODE1_DD8 0x00000008
[all …]
/openbmc/qemu/pc-bios/
H A Dcanyonlands.dts18 dcr-parent = <&{/cpus/cpu@0}>;
29 #size-cells = <0>;
31 cpu@0 {
34 reg = <0x00000000>;
35 clock-frequency = <0>; /* Filled in by U-Boot */
36 timebase-frequency = <0>; /* Filled in by U-Boot */
49 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
55 cell-index = <0>;
56 dcr-reg = <0x0c0 0x009>;
57 #address-cells = <0>;
[all …]
/openbmc/qemu/hw/arm/
H A Dallwinner-r40.c41 [AW_R40_DEV_SRAM_A1] = 0x00000000,
42 [AW_R40_DEV_SRAM_A2] = 0x00004000,
43 [AW_R40_DEV_SRAM_A3] = 0x00008000,
44 [AW_R40_DEV_SRAM_A4] = 0x0000b400,
45 [AW_R40_DEV_SRAMC] = 0x01c00000,
46 [AW_R40_DEV_EMAC] = 0x01c0b000,
47 [AW_R40_DEV_MMC0] = 0x01c0f000,
48 [AW_R40_DEV_MMC1] = 0x01c10000,
49 [AW_R40_DEV_MMC2] = 0x01c11000,
50 [AW_R40_DEV_MMC3] = 0x01c12000,
[all …]
H A Dallwinner-h3.c38 [AW_H3_DEV_SRAM_A1] = 0x00000000,
39 [AW_H3_DEV_SRAM_A2] = 0x00044000,
40 [AW_H3_DEV_SRAM_C] = 0x00010000,
41 [AW_H3_DEV_SYSCTRL] = 0x01c00000,
42 [AW_H3_DEV_MMC0] = 0x01c0f000,
43 [AW_H3_DEV_SID] = 0x01c14000,
44 [AW_H3_DEV_EHCI0] = 0x01c1a000,
45 [AW_H3_DEV_OHCI0] = 0x01c1a400,
46 [AW_H3_DEV_EHCI1] = 0x01c1b000,
47 [AW_H3_DEV_OHCI1] = 0x01c1b400,
[all …]
/openbmc/linux/include/soc/fsl/qe/
H A Dqe.h32 QE_CLK_NONE = 0,
131 return 0; in cpm_muram_dma()
227 return 0; in qe_alive_during_sleep()
271 u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
284 __be32 traps[16]; /* Trap addresses, 0 == ignore */
328 #define BD_STATUS_MASK 0xffff0000
329 #define BD_LENGTH_MASK 0x0000ffff
337 #define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */
338 #define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */
339 #define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */
[all …]
/openbmc/linux/sound/firewire/fireface/
H A Dff-protocol-former.c10 #define FORMER_REG_SYNC_STATUS 0x0000801c0000ull
12 #define FORMER_REG_FETCH_PCM_FRAMES 0x0000801c0000ull
13 #define FORMER_REG_CLOCK_CONFIG 0x0000801c0004ull
22 { 32000, 0x00000002, }, in parse_clock_bits()
23 { 44100, 0x00000000, }, in parse_clock_bits()
24 { 48000, 0x00000006, }, in parse_clock_bits()
25 { 64000, 0x0000000a, }, in parse_clock_bits()
26 { 88200, 0x00000008, }, in parse_clock_bits()
27 { 96000, 0x0000000e, }, in parse_clock_bits()
28 { 128000, 0x00000012, }, in parse_clock_bits()
[all …]
/openbmc/u-boot/include/linux/
H A Dimmap_qe.h16 #define QE_MURAM_SIZE 0xc000UL
20 #define QE_MURAM_SIZE 0x4000UL
27 #define QE_MURAM_SIZE 0x6000UL
33 #define QE_IMMR_OFFSET 0x00140000
35 #define QE_IMMR_OFFSET 0x01400000
42 u8 res0[0x4];
44 u8 res1[0x70];
60 u8 res0[0x4];
63 u8 res1[0x4];
65 u8 res2[0x20];
[all …]
/openbmc/linux/arch/hexagon/kernel/
H A Dvm_init_segtable.S16 * Start with mapping PA=0 to both VA=0x0 and VA=0xc000000 as 16MB large pages.
46 /* VA 0x00000000 */
59 /* VA 0x40000000 */
68 /* VA 0x80000000 */
74 /*0xa8*/.word X,X,X,X
77 /*0xa9*/.word BKPG_IO(0xa9000000),BKPG_IO(0xa9000000),BKPG_IO(0xa9000000),BKPG_IO(0xa9000000)
79 /*0xa9*/.word X,X,X,X
81 /*0xaa*/.word X,X,X,X
82 /*0xab*/.word X,X,X,X
83 /*0xac*/.word X,X,X,X
[all …]
/openbmc/linux/drivers/comedi/drivers/
H A Ds626.h36 #define S626_RANGE_5V 0x10 /* +/-5V range */
37 #define S626_RANGE_10V 0x00 /* +/-10V range */
39 #define S626_EOPL 0x80 /* End of ADC poll list marker. */
40 #define S626_GSEL_BIPOLAR5V 0x00F0 /* S626_LP_GSEL setting 5V bipolar. */
41 #define S626_GSEL_BIPOLAR10V 0x00A0 /* S626_LP_GSEL setting 10V bipolar. */
44 #define S626_ERR_ILLEGAL_PARM 0x00010000 /*
48 #define S626_ERR_I2C 0x00020000 /* I2C error. */
49 #define S626_ERR_COUNTERSETUP 0x00200000 /*
53 #define S626_ERR_DEBI_TIMEOUT 0x00400000 /* DEBI transfer timed out. */
74 #define S626_IRQ_GPIO3 0x00000040 /* IRQ enable for GPIO3. */
[all …]

12