Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39 |
|
#
66b63a60 |
| 05-May-2020 |
Jason Yan <yanaijie@huawei.com> |
bnx2x: Remove Comparison to bool in bnx2x_dcb.c
Fix the following coccicheck warning:
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c:1548:17-31: WARNING: Comparison to bool drivers/net/ethernet/br
bnx2x: Remove Comparison to bool in bnx2x_dcb.c
Fix the following coccicheck warning:
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c:1548:17-31: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c:1148:16-24: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c:1158:30-38: WARNING: Comparison to bool
Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2 |
|
#
e5d3a51c |
| 16-Feb-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
bnx2x: extend DCBx support
This adds support for default application priority.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
bnx2x: extend DCBx support
This adds support for default application priority.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4 |
|
#
4ad79e13 |
| 22-Jul-2015 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
bnx2x: Rebrand from 'broadcom' into 'qlogic'
bnx2x still appears as a Broadcom driver even though the devices it utilizes belong to Qlogic for more than a year.
This patch changes the various heade
bnx2x: Rebrand from 'broadcom' into 'qlogic'
bnx2x still appears as a Broadcom driver even though the devices it utilizes belong to Qlogic for more than a year.
This patch changes the various headers and the device strings to indicate the correct ownership of the device.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
28311f8e |
| 22-Jul-2015 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
bnx2x: Utilize FW 7.12.30
This moves bnx2x into using 7.12.30 FW. Said firmware fixes the following:
- Packets from a VF with pvid configured which were sent with a different vlan were transmit
bnx2x: Utilize FW 7.12.30
This moves bnx2x into using 7.12.30 FW. Said firmware fixes the following:
- Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded.
- FCoE traffic might not recover after a failue while there's traffic to another function.
In addition, this FW opens the door for the driver to implement several new features; Specifically, this enhances the device's support for encapsulated packets and will allow vxlan/geneve offloads to be added in the future, as well as vlan filtering offload.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2 |
|
#
0c23ad37 |
| 17-Aug-2014 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
bnx2x: Code cleanup
This patch does several semantic things: - Fixing typos. - Removing unnecessary prints. - Removing unused functions and definitions. - Change 'strange' usage of boolean v
bnx2x: Code cleanup
This patch does several semantic things: - Fixing typos. - Removing unnecessary prints. - Removing unused functions and definitions. - Change 'strange' usage of boolean variables.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6 |
|
#
c2659479 |
| 17-Jul-2014 |
Anish Bhatt <anish@chelsio.com> |
Update setapp/getapp prototypes in dcbnl_rtnl_ops to return int instead of u8
v2: fixed issue with checking return of dcbnl_rtnl_ops->getapp()
Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-
Update setapp/getapp prototypes in dcbnl_rtnl_ops to return int instead of u8
v2: fixed issue with checking return of dcbnl_rtnl_ops->getapp()
Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8 |
|
#
08f6dd89 |
| 27-May-2014 |
Ariel Elior <ariel.elior@qlogic.com> |
bnx2x: update MAINTAINERS for bnx2x and e-mail addresses
The bnx2x development team has transferred from Broadcom to Qlogic. This patch updates some obsolete email addresses to usable ones. The bnx2
bnx2x: update MAINTAINERS for bnx2x and e-mail addresses
The bnx2x development team has transferred from Broadcom to Qlogic. This patch updates some obsolete email addresses to usable ones. The bnx2x files contain headers with legal information from Broadcom. Qlogic Legal depratment is taking their time coming up with their own legal info. So this patch only updates contact information. I will follow up with a patch for the headers once I have the required info.
Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3 |
|
#
230bb0f3 |
| 12-Feb-2014 |
Yuval Mintz <yuvalmin@broadcom.com> |
bnx2x: (semantic) revise scheduling of sp_rtnl
This removes the various points where the driver use bit operations in order to schedule the sp_rtnl_task from the code, adding a single utility functi
bnx2x: (semantic) revise scheduling of sp_rtnl
This removes the various points where the driver use bit operations in order to schedule the sp_rtnl_task from the code, adding a single utility function that does it instead.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1 |
|
#
6ffa39f2 |
| 17-Nov-2013 |
Dmitry Kravkov <dmitry@broadcom.com> |
bnx2x: Prevent "timeout waiting for state X"
Current driver release rtnl lock in between DCB re-configuration. As a result, other flows (e.g., mtu config) may enter in between and fail due to halted
bnx2x: Prevent "timeout waiting for state X"
Current driver release rtnl lock in between DCB re-configuration. As a result, other flows (e.g., mtu config) may enter in between and fail due to halted tx path for dcb configuration.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7 |
|
#
79b17a94 |
| 19-Aug-2013 |
Dmitry Kravkov <dmitry@broadcom.com> |
bnx2x: Consider DCBX remote error
When publishing information via getfeatcfg(), bnx2x driver didn't consider remote errors (e.g., switch that doesn't support DCBX) when setting the error flags.
Sig
bnx2x: Consider DCBX remote error
When publishing information via getfeatcfg(), bnx2x driver didn't consider remote errors (e.g., switch that doesn't support DCBX) when setting the error flags.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
07b4eb3b |
| 19-Aug-2013 |
Dmitry Kravkov <dmitry@broadcom.com> |
bnx2x: Change DCB context handling
After notification that DCBX configuration has ended arrived to the driver, the driver configured the FW/HW in sleepless context. As a result, it was possible to r
bnx2x: Change DCB context handling
After notification that DCBX configuration has ended arrived to the driver, the driver configured the FW/HW in sleepless context. As a result, it was possible to reach a race (mostly with CNIC registration) in which the configuration will return a timeout, failing to set the DCBX results correctly.
This patch moves the configuration following the DCBX end into the slowpath RTNL task (i.e., sleepless context protected by the RTNL lock), allowing the configuration to cope with such races.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.11-rc6 |
|
#
568e2426 |
| 12-Aug-2013 |
Dmitry Kravkov <dmitry@broadcom.com> |
bnx2x: update fairness parameters following DCB negotiation
ETS can be enabled as a result of DCB negotiation, then fairness must be recalculated after each negotiation.
Signed-off-by: Dmitry Kravk
bnx2x: update fairness parameters following DCB negotiation
ETS can be enabled as a result of DCB negotiation, then fairness must be recalculated after each negotiation.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4 |
|
#
6bf07b8e |
| 01-Jun-2013 |
Yuval Mintz <yuvalmin@broadcom.com> |
bnx2x: Revise prints
This patch revises many bnx2x prints - mainly fixing print typos and adding some new debug prints (mostly for parity issues).
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
bnx2x: Revise prints
This patch revises many bnx2x prints - mainly fixing print typos and adding some new debug prints (mostly for parity issues).
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
16a5fd92 |
| 01-Jun-2013 |
Yuval Mintz <yuvalmin@broadcom.com> |
bnx2x: Revise comments and alignment
This patch correct various typos, fix comments conventions and adds/removes a few comments.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ar
bnx2x: Revise comments and alignment
This patch correct various typos, fix comments conventions and adds/removes a few comments.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
d76a6111 |
| 01-Jun-2013 |
Yuval Mintz <yuvalmin@broadcom.com> |
bnx2x: Semantic change of empty lines
This patch removes unnecessary blank lines and adds a few where such are needed (between variable declarations and code)
Signed-off-by: Yuval Mintz <yuvalmin@b
bnx2x: Semantic change of empty lines
This patch removes unnecessary blank lines and adds a few where such are needed (between variable declarations and code)
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8 |
|
#
b23f7a09 |
| 17-Apr-2013 |
Masanari Iida <standby24x7@gmail.com> |
treewide: Fix typo in printk and comments
Fix typo in printk and comments within various drivers.
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
Revision tags: v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4 |
|
#
8fe7f99a |
| 23-Mar-2013 |
Kumar Amit Mehta <gmate.amit@gmail.com> |
bnx2x: fix assignment of signed expression to unsigned variable
fix for incorrect assignment of signed expression to unsigned variable.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Acked-
bnx2x: fix assignment of signed expression to unsigned variable
fix for incorrect assignment of signed expression to unsigned variable.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5 |
|
#
2de67439 |
| 22-Jan-2013 |
Yuval Mintz <yuvalmin@broadcom.com> |
bnx2x: Semantic renovation
Mostly corrects white spaces, indentations, and comments.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-b
bnx2x: Semantic renovation
Mostly corrects white spaces, indentations, and comments.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.8-rc4 |
|
#
247fa82b |
| 13-Jan-2013 |
Yuval Mintz <yuvalmin@broadcom.com> |
bnx2x: Introduce 2013 and advance version to 1.78.02
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broad
bnx2x: Introduce 2013 and advance version to 1.78.02
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8 |
|
#
049b467d |
| 01-Dec-2012 |
Barak Witkowski <barak@broadcom.com> |
bnx2x: Correct PFC disablement
bnx2x driver could only have enabled pfc via usage of dcbnl; now, it can also correctly disable it.
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by:
bnx2x: Correct PFC disablement
bnx2x driver could only have enabled pfc via usage of dcbnl; now, it can also correctly disable it.
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
0370cf90 |
| 01-Dec-2012 |
Barak Witkowski <barak@broadcom.com> |
bnx2x: prevent DCB if disabled in nvram
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> S
bnx2x: prevent DCB if disabled in nvram
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
4c704899 |
| 01-Dec-2012 |
Barak Witkowski <barak@broadcom.com> |
bnx2x: Management can control PFC/ETS
If configured for PFC/ETS by management, configure chip regardless of the presence of a remote peer which supports DCBX.
Signed-off-by: Barak Witkowski <barak@
bnx2x: Management can control PFC/ETS
If configured for PFC/ETS by management, configure chip regardless of the presence of a remote peer which supports DCBX.
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.7-rc7, v3.7-rc6, v3.7-rc5 |
|
#
55c11941 |
| 06-Nov-2012 |
Merav Sicron <meravs@broadcom.com> |
bnx2x: Support loading cnic resources at run-time
This patch replaces the BCM_CNIC define with a flag which can change at run-time and which does not use the CONFIG_CNIC kconfig option. For the PF/h
bnx2x: Support loading cnic resources at run-time
This patch replaces the BCM_CNIC define with a flag which can change at run-time and which does not use the CONFIG_CNIC kconfig option. For the PF/hypervisor driver cnic is always supported, however allocation of cnic resources and configuration of the HW for offload mode is done only when the cnic module registers bnx2x.
Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1 |
|
#
96bed4b9 |
| 30-Sep-2012 |
Yuval Mintz <yuvalmin@broadcom.com> |
bnx2x,cnic: use FW 7.8.2
This patch moves the bnx2x and cnic drivers into using FW 7.8.2 which was recently submitted into the linux-firmware tree.
A short summary of minor bugs fixed by this FW:
bnx2x,cnic: use FW 7.8.2
This patch moves the bnx2x and cnic drivers into using FW 7.8.2 which was recently submitted into the linux-firmware tree.
A short summary of minor bugs fixed by this FW: 1. In switch dependent mode, fix several issues regarding inner vlan vs. DCB priorities. 2. iSCSI - not all packets were completed on a forward channel. 3. DCB - fixed for 4-port devices. 4. Fixed false parity reported in CAM memories when operating near -5% on the 1.0V core supply. 5. ETS default settings are set to fairness between traffic classes (rather than strict priority), and uses the same chip receive buffer configuration for both PFC and pause.
For a complete list of fixes made by this FW, see commit 236367db in the linux-firmware git repository.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4 |
|
#
9876879f |
| 19-Jun-2012 |
Barak Witkowski <barak@broadcom.com> |
bnx2x: Support DCBX for all functions
In multi-function device, allow configuring dcbx admin params from all drivers on a single physical port.
Signed-off-by: Barak Witkowski <barak@broadcom.com> S
bnx2x: Support DCBX for all functions
In multi-function device, allow configuring dcbx admin params from all drivers on a single physical port.
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|