mmc: host: sdhci-sprd: Add software queue support

Add software queue support to improve the performance.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang7

mmc: host: sdhci-sprd: Add software queue support

Add software queue support to improve the performance.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/f629b32943aae9e30ffa17acf4af06c270417001.1581478569.git.baolin.wang7@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: clear the UHS-I modes read from registers

sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I
mode used by the specific card can be selected via devicetree only.

mmc: sdhci-sprd: clear the UHS-I modes read from registers

sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I
mode used by the specific card can be selected via devicetree only.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTION

sprd's sd host controller doesn't support detection to
card insert or remove.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial

mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTION

sprd's sd host controller doesn't support detection to
card insert or remove.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKEN

The bit of PRESET_VAL_ENABLE in HOST_CONTROL2 register is reserved on
sprd's sd host controller, set quirk2 to disable configuring this.

Fixes:

mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKEN

The bit of PRESET_VAL_ENABLE in HOST_CONTROL2 register is reserved on
sprd's sd host controller, set quirk2 to disable configuring this.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: add get_ro hook function

sprd's sd host controller doesn't support write protect to sd card.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signe

mmc: sdhci-sprd: add get_ro hook function

sprd's sd host controller doesn't support write protect to sd card.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: fixed incorrect clock divider

The register SDHCI_CLOCK_CONTROL should be cleared before config clock
divider, otherwise the frequency configured maybe lower than we
expected.

Fixes

mmc: sdhci-sprd: fixed incorrect clock divider

The register SDHCI_CLOCK_CONTROL should be cleared before config clock
divider, otherwise the frequency configured maybe lower than we
expected.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming

The SD host controller specification defines 3 types software reset:
software reset for data line, software reset for co

mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming

The SD host controller specification defines 3 types software reset:
software reset for data line, software reset for command line and software
reset for all. Software reset for all means this reset affects the entire
Host controller except for the card detection circuit.

In sdhci_runtime_resume_host() we always do a software "reset for all",
which causes the Spreadtrum variant controller to work abnormally after
resuming. To fix the problem, let's do a software reset for the data and
the command part, rather than "for all".

However, as sdhci_runtime_resume() is a common sdhci function and we don't
want to change the behaviour for other variants, let's introduce a new
in-parameter for it. This enables the caller to decide if a "reset for all"
shall be done or not.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: host: sdhci-sprd: Fix the missing pm_runtime_put_noidle()

When the SD host controller tries to probe again due to the derferred
probe mechanism, it will always keep the SD host device as runtim

mmc: host: sdhci-sprd: Fix the missing pm_runtime_put_noidle()

When the SD host controller tries to probe again due to the derferred
probe mechanism, it will always keep the SD host device as runtime
resume state due to missing the runtime put operation in error path
last time.

Thus add the pm_runtime_put_noidle() in error path to make the PM runtime
counter balance, which can make the SD host device's PM runtime work well.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Add pin control support for voltage switch

For Spreadtrum SD card voltage switching, besides regulator setting,
it also need switch related pin's state to output corresponding volta

mmc: sdhci-sprd: Add pin control support for voltage switch

For Spreadtrum SD card voltage switching, besides regulator setting,
it also need switch related pin's state to output corresponding voltage.

This patch adds pin control operation to support voltage switch.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Add start_signal_voltage_switch ops

For Spreadtrum SD host controller, we can not use standard SD registers
to change and detect the I/O voltage signals, since our voltage regulator

mmc: sdhci-sprd: Add start_signal_voltage_switch ops

For Spreadtrum SD host controller, we can not use standard SD registers
to change and detect the I/O voltage signals, since our voltage regulator
for I/O is fixed in hardware, and no signals were connected to the SD
controller. Thus add Spreadtrum specific voltage switch ops to change
voltage instead of using standard SD host registers.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Add PHY DLL delay configuration

Set the PHY DLL delay for each timing mode, which is used to sample the clock
accurately and make the clock more stable.

Signed-off-by: Baolin Wang

mmc: sdhci-sprd: Add PHY DLL delay configuration

Set the PHY DLL delay for each timing mode, which is used to sample the clock
accurately and make the clock more stable.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Enable PHY DLL to make clock stable

For the Spreadtrum SD host controller, when we changed the clock to be
more than 52M, we should enable the PHY DLL which is used to track the
clo

mmc: sdhci-sprd: Enable PHY DLL to make clock stable

For the Spreadtrum SD host controller, when we changed the clock to be
more than 52M, we should enable the PHY DLL which is used to track the
clock frequency to make the clock work more stable. Otherwise deviation
may occur of the higher clock.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Add HS400 enhanced strobe mode

Add HS400 enhanced strobe mode support for Spreadtrum SD host controller.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter

mmc: sdhci-sprd: Add HS400 enhanced strobe mode

Add HS400 enhanced strobe mode support for Spreadtrum SD host controller.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Implement the get_max_timeout_count() interface

Implement the get_max_timeout_count() interface to set the Spredtrum SD
host controller actual maximum timeout count.

Signed-off-by:

mmc: sdhci-sprd: Implement the get_max_timeout_count() interface

Implement the get_max_timeout_count() interface to set the Spredtrum SD
host controller actual maximum timeout count.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Add optional gate clock support

For the Spreadtrum SC9860 platform, we should enable another gate clock
'2x_enable' to make the SD host controller work well.

Signed-off-by: Baolin

mmc: sdhci-sprd: Add optional gate clock support

For the Spreadtrum SC9860 platform, we should enable another gate clock
'2x_enable' to make the SD host controller work well.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Check the enable clock's return value correctly

Missed to check the enable clock's return value, fix it.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter

mmc: sdhci-sprd: Check the enable clock's return value correctly

Missed to check the enable clock's return value, fix it.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Add Spreadtrum's initial host controller

This patch adds the initial support of Secure Digital Host Controller
Interface compliant controller found in some latest Spreadtrum chipset

mmc: sdhci-sprd: Add Spreadtrum's initial host controller

This patch adds the initial support of Secure Digital Host Controller
Interface compliant controller found in some latest Spreadtrum chipsets.
This patch has been tested on the version of SPRD-R11 controller.

R11 is a variant based on SD v4.0 specification.

With this driver, R11 mmc can be initialized, can be mounted, read and
written.

Original-by: Billows Wu <billows.wu@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: use sdhci_sprd_writew

[ Upstream commit 961470820021e6f9d74db4837bd6831a1a30341b ]

The sdhci_sprd_writew() was defined by never used in sdhci_ops:

driv

mmc: sdhci-sprd: use sdhci_sprd_writew

[ Upstream commit 961470820021e6f9d74db4837bd6831a1a30341b ]

The sdhci_sprd_writew() was defined by never used in sdhci_ops:

drivers/mmc/host/sdhci-sprd.c:134:20: warning: unused function 'sdhci_sprd_writew'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210601095403.236007-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

mmc: sdhci-sprd: Fix some resource leaks in the remove function

[ Upstream commit c9c256a8b0dc09c305c409d6264cc016af2ba38d ]

'sdhci_remove_host()' and 'sdhci_pltfm_free()' should be

mmc: sdhci-sprd: Fix some resource leaks in the remove function

[ Upstream commit c9c256a8b0dc09c305c409d6264cc016af2ba38d ]

'sdhci_remove_host()' and 'sdhci_pltfm_free()' should be used in place of
'mmc_remove_host()' and 'mmc_free_host()'.

This avoids some resource leaks, is more in line with the error handling
path of the probe function, and is more consistent with other drivers.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Orson Zhai <orson.zhai@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201217204236.163446-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

mmc: sdhci: fix indentation mistakes

Fix inconsistent indenting, reported by Smatch:

drivers/mmc/host/sdhci-esdhc-imx.c:1380 sdhci_esdhc_imx_hwinit() warn: inconsistent indenting

mmc: sdhci: fix indentation mistakes

Fix inconsistent indenting, reported by Smatch:

drivers/mmc/host/sdhci-esdhc-imx.c:1380 sdhci_esdhc_imx_hwinit() warn: inconsistent indenting
drivers/mmc/host/sdhci-sprd.c:390 sdhci_sprd_request_done() warn: inconsistent indenting

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200923153739.30327-2-krzk@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v5.4

This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous
probe") but applied to a whole pile of drivers.

mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v5.4

This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous
probe") but applied to a whole pile of drivers. This batch converts
the drivers that appeared to be around in the v5.4 timeframe.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200903162412.5.I2b630c4d40ff4ea61d5b30b8ccfe95890e257100@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

show more ...

mmc: host: sdhci-sprd: Implement the request_atomic() API

Implement the request_atomic() API for nonremovable cards, that means
we can submit next request in the irq hard handler context

mmc: host: sdhci-sprd: Implement the request_atomic() API

Implement the request_atomic() API for nonremovable cards, that means
we can submit next request in the irq hard handler context to reduce
latency.

Moreover factor out the AUTO CMD23 checking into a separate function
to reduce duplicate code.

Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/60142fe6c6c1dbba2696e775564ae2166786f0bc.1586744073.git.baolin.wang7@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: host: Prepare host drivers for mmc_regulator_set_vqmmc() returning > 0

Patch all drivers which use mmc_regulator_set_vqmmc() and prepare them for
the fact that mmc_regulator_set_vqm

mmc: host: Prepare host drivers for mmc_regulator_set_vqmmc() returning > 0

Patch all drivers which use mmc_regulator_set_vqmmc() and prepare them for
the fact that mmc_regulator_set_vqmmc() can return a value > 0, which would
happen if the signal voltage switch did NOT happen, because the voltage was
already set correctly.

Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20200416163649.336967-1-marex@denx.de
[Ulf: Re-worked/simplified the code a bit]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci-sprd: Drop redundant cap flags

The MMC_CAP_ERASE and MMC_CAP_CMD23 flags are already being set in the
common sdhci_setup_host(). This makes it redundant to set them for
sd

mmc: sdhci-sprd: Drop redundant cap flags

The MMC_CAP_ERASE and MMC_CAP_CMD23 flags are already being set in the
common sdhci_setup_host(). This makes it redundant to set them for
sdhci-sprd, so let's drop them.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200406113724.8504-1-ulf.hansson@linaro.org

show more ...