Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8 |
|
#
d2912cb1 |
| 04-Jun-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
1096d1c1 |
| 16-May-2018 |
Russ Dill <Russ.Dill@ti.com> |
ARM: OMAP2+: Add functions to save and restore clockdomain context en-masse.
This is used to support suspend modes like RTC-only and hibernate where the state of the registers controlling clockdomai
ARM: OMAP2+: Add functions to save and restore clockdomain context en-masse.
This is used to support suspend modes like RTC-only and hibernate where the state of the registers controlling clockdomains is lost.
Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
Revision tags: v4.16, v4.15, v4.13.16, v4.14 |
|
#
60af58cd |
| 06-Nov-2017 |
Bhumika Goyal <bhumirks@gmail.com> |
ARM: OMAP2+: CM: make cm_ll_data structures as const
Make these const as they are only getting passed to the functions cm_register and cm_unregister having the arguments as const.
Signed-off-by: Bh
ARM: OMAP2+: CM: make cm_ll_data structures as const
Make these const as they are only getting passed to the functions cm_register and cm_unregister having the arguments as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
Revision tags: v4.13.5, v4.13 |
|
#
1055d92c |
| 04-Aug-2017 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP4: CMINST: add support for translating clkctrl addresses
Needed to map clkctrl clocks against hwmods. This patch also removes the obsolete clkdm_xlate_address function which is no longer ne
ARM: OMAP4: CMINST: add support for translating clkctrl addresses
Needed to map clkctrl clocks against hwmods. This patch also removes the obsolete clkdm_xlate_address function which is no longer needed for anything.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
show more ...
|
Revision tags: v4.12 |
|
#
308b4e38 |
| 31-May-2017 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP4: cminst: add support for clkdm_xlate_address
This function gets the physical base address of a clockdomain.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <ton
ARM: OMAP4: cminst: add support for clkdm_xlate_address
This function gets the physical base address of a clockdomain.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
#
90129336 |
| 31-May-2017 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP2+: PRCM: store also physical addresses for instances
In some cases the physical address info is needed, so store this under the existing cm*_base, prm_base and prcm_mpu_base variables. The
ARM: OMAP2+: PRCM: store also physical addresses for instances
In some cases the physical address info is needed, so store this under the existing cm*_base, prm_base and prcm_mpu_base variables. These are converted now to structs that contain both virtual and physical address base for the instance.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1 |
|
#
e4e53287 |
| 12-Jul-2016 |
Dave Gerlach <d-gerlach@ti.com> |
ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero
Now that we have moved the check for valid clkctrl_offs to the caller of am33xx_cm_wait_module_ready/idle and omap4_cminst_wait_modu
ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero
Now that we have moved the check for valid clkctrl_offs to the caller of am33xx_cm_wait_module_ready/idle and omap4_cminst_wait_module_ready/idle let's remove the now redundant check for clkctrl_offs from these functions.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
Revision tags: openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6 |
|
#
425dc8b2 |
| 21-Nov-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP2+: CM: move SoC specific init calls within a generic API
This gets rid of need for some exported driver APIs, and simplifies the initialization of the CM driver. Done in preparation to mak
ARM: OMAP2+: CM: move SoC specific init calls within a generic API
This gets rid of need for some exported driver APIs, and simplifies the initialization of the CM driver. Done in preparation to make CM a separate driver. The init data is now also passed to the SoC specific implementations, allowing future expansion to add feature flags etc.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
show more ...
|
Revision tags: v3.18-rc5 |
|
#
5970ca2d |
| 11-Nov-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP2+: CM: determine CM base address from device tree
There is no need to provide the CM base address through a low-level API from the low-level IO init, as this information is available throu
ARM: OMAP2+: CM: determine CM base address from device tree
There is no need to provide the CM base address through a low-level API from the low-level IO init, as this information is available through DT. Re-routed the parsing function to be called from the CM drivers also to simplify the implementation under io.c.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
show more ...
|
Revision tags: v3.18-rc4 |
|
#
66db6428 |
| 06-Nov-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver
There is no need to call this separately from io.c, rather this can be done commonly under the CM driver. Also, this patch makes the API
ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver
There is no need to call this separately from io.c, rather this can be done commonly under the CM driver. Also, this patch makes the API static, as it is no longer used outside the driver file.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
show more ...
|
Revision tags: v3.18-rc3 |
|
#
4215afaf |
| 27-Oct-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP4: CM: make cminst direct register access functions static
These shall not be accessed outside the CM driver. This also removes the need for the cminst44xx.h header.
Signed-off-by: Tero Kr
ARM: OMAP4: CM: make cminst direct register access functions static
These shall not be accessed outside the CM driver. This also removes the need for the cminst44xx.h header.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
#
128603f0 |
| 27-Oct-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
Adds a generic CM driver API for enabling/disabling modules. The SoC specific implementations are registered through cm_ll_data.
Signed
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
Adds a generic CM driver API for enabling/disabling modules. The SoC specific implementations are registered through cm_ll_data.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
#
f2650d6e |
| 27-Oct-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP2+: CM: make clkdm_hwsup operations static
These are not accessed outside the cm*.c files themselves, so make them static.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walms
ARM: OMAP2+: CM: make clkdm_hwsup operations static
These are not accessed outside the cm*.c files themselves, so make them static.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
#
a8ae5afa |
| 27-Oct-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP4+/AM33xx: CM: add common API for cm_wait_module_idle
Adds a generic CM driver API for waiting module to enter idle / standby. The SoC specific implementations are registered through cm_ll_
ARM: OMAP4+/AM33xx: CM: add common API for cm_wait_module_idle
Adds a generic CM driver API for waiting module to enter idle / standby. The SoC specific implementations are registered through cm_ll_data.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
#
021b6ff0 |
| 27-Oct-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP2+: CM: add common API for cm_wait_module_ready
This patch consolidates the parameters provided for the SoC specific cm_*_wait_module_ready calls, adds the missing cm_ll_data function point
ARM: OMAP2+: CM: add common API for cm_wait_module_ready
This patch consolidates the parameters provided for the SoC specific cm_*_wait_module_ready calls, adds the missing cm_ll_data function pointers and uses the now generic call from the mach-omap2 board code. SoC specific *_wait_module_ready calls are also made static so they can only be accessed through the generic CM driver API only.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
#
7632a02f |
| 27-Oct-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP4/AM33xx: add cm_init / cm_exit calls for AM33xx and OMAP4+
This is needed for expanding the generic CM driver API to include AM33xx and OMAP4 also.
Signed-off-by: Tero Kristo <t-kristo@ti
ARM: OMAP4/AM33xx: add cm_init / cm_exit calls for AM33xx and OMAP4+
This is needed for expanding the generic CM driver API to include AM33xx and OMAP4 also.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
#
9907f85e |
| 27-Oct-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: AM33xx/OMAP4+: CM: remove cdoffs parameter from wait_module_idle/ready
This is not needed for anything. This also eases the consolidation of the wait_module_ready / wait_module_idle calls behin
ARM: AM33xx/OMAP4+: CM: remove cdoffs parameter from wait_module_idle/ready
This is not needed for anything. This also eases the consolidation of the wait_module_ready / wait_module_idle calls behind a generic CM driver API by reducing the number of needed parameters.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
Revision tags: v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1 |
|
#
70fcebf1 |
| 31-Mar-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
Done in preparation to make PRCM a standalone driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul
ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
Done in preparation to make PRCM a standalone driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
show more ...
|
#
4794208c |
| 11-May-2014 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP2+: PRCM: cleanup some header includes
Some of the includes are totally unnecessary, remove some others in preparation to make the PRCM its own driver.
Signed-off-by: Tero Kristo <t-kristo
ARM: OMAP2+: PRCM: cleanup some header includes
Some of the includes are totally unnecessary, remove some others in preparation to make the PRCM its own driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com> [paul@pwsan.com: updated to apply; fixed build error on OMAP2xxx-only configs] Signed-off-by: Paul Walmsley <paul@pwsan.com>
show more ...
|
#
edfaf05c |
| 15-Apr-2014 |
Victor Kamensky <victor.kamensky@linaro.org> |
ARM: OMAP2+: raw read and write endian fix
All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_r
ARM: OMAP2+: raw read and write endian fix
All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode.
Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
Revision tags: v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5 |
|
#
f67f04ba |
| 28-Feb-2014 |
Dave Gerlach <d-gerlach@ti.com> |
ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support
Since commit 65aa94b204d (ARM: OMAP4: clockdomain/CM code: Update supported transition modes), on OMAP4, all CLKDMs support HW_AUTO so this is
ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support
Since commit 65aa94b204d (ARM: OMAP4: clockdomain/CM code: Update supported transition modes), on OMAP4, all CLKDMs support HW_AUTO so this is used instead of SW_SLEEP for the idling of clockdomains. However, additional SoCs now leverage the OMAP4 clockdomain code so update it to use SW_SLEEP if the clockdomain data specifies that the CLKDM has the CLKDM_CAN_FORCE_SLEEP flag set rather than using HW_AUTO for both cases.
Without this patch, clockdomain handling is broken on AM43xx and no clockdomains are actually being put into idle on this platform. Any attempt to idle them results in the HW_AUTO value (0x3) being written to them with no apparent effect.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [paul@pwsan.com: added extra explanatory text from patch set intro] Signed-off-by: Paul Walmsley <paul@pwsan.com>
show more ...
|
Revision tags: v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5 |
|
#
c9218fe6 |
| 12-Oct-2013 |
Ambresh K <ambresh@ti.com> |
ARM: OMAP2+: CM: AM43x clockdomain data
Add the data file to describe clock domains in AM43x SoC. OMAP4 clockdomain operations is being reused here.
Signed-off-by: Ambresh K <ambresh@ti.com> Signed
ARM: OMAP2+: CM: AM43x clockdomain data
Add the data file to describe clock domains in AM43x SoC. OMAP4 clockdomain operations is being reused here.
Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
show more ...
|
#
d3f5d551 |
| 12-Oct-2013 |
Ankur Kishore <a-kishore@ti.com> |
ARM: OMAP2+: CM: cm_inst offset s16->u16
Most of the AM43x CM reg address offsets are with MSB bit '1' (on 16-bit value) leading to arithmetic miscalculations while calculating CLOCK ENABLE register
ARM: OMAP2+: CM: cm_inst offset s16->u16
Most of the AM43x CM reg address offsets are with MSB bit '1' (on 16-bit value) leading to arithmetic miscalculations while calculating CLOCK ENABLE register's address because cm_inst field was a type of "const s16", so make it "const u16".
Also modify relevant functions so as to take care of the above.
[afzal@ti.com: fixup and cleanup]
Signed-off-by: Ankur Kishore <a-kishore@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
show more ...
|
Revision tags: v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6 |
|
#
92493870 |
| 26-Jan-2013 |
Paul Walmsley <paul@pwsan.com> |
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
The atomic usecounts seem to be confusing, and are no longer needed since the operations that they are
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
The atomic usecounts seem to be confusing, and are no longer needed since the operations that they are attached to really should take place under lock. Replace the atomic counters with simple integers, protected by the enclosing powerdomain spinlock.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
show more ...
|
Revision tags: v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3 |
|
#
4bd5259e |
| 21-Oct-2012 |
Paul Walmsley <paul@pwsan.com> |
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM
Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM
Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files.
The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
show more ...
|