/openbmc/linux/arch/arm64/boot/dts/actions/ |
H A D | s700-cubieboard7.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 15 serial3 = &uart3; 19 stdout-path = "serial3:115200n8"; 35 pinctrl-names = "default"; 36 pinctrl-0 = <&i2c0_default>; 41 pinctrl-names = "default"; 42 pinctrl-0 = <&i2c1_default>; 47 pinctrl-names = "default"; 48 pinctrl-0 = <&i2c2_default>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/microchip/ |
H A D | at91-sama5d27_wlsom1_ek.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK 9 /dts-v1/; 10 #include "at91-sama5d27_wlsom1.dtsi" 11 #include <dt-bindings/input/input.h> 15 …compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel… 21 serial3 = &uart3; /* mikro BUS 1 */ 26 stdout-path = "serial0:115200n8"; 29 gpio-keys { 30 compatible = "gpio-keys"; [all …]
|
H A D | at91-kizbox3_common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3 12 /dts-v1/; 14 #include "sama5d2-pinfunc.h" 15 #include <dt-bindings/gpio/gpio.h> 16 #include <dt-bindings/mfd/atmel-flexcom.h> 17 #include <dt-bindings/pinctrl/at91.h> 18 #include <dt-bindings/pwm/pwm.h> 28 serial3 = &uart3; 36 stdout-path = "serial1:115200n8"; [all …]
|
H A D | at91-sama5d2_icp.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board 11 /dts-v1/; 13 #include "sama5d2-pinfunc.h" 14 #include <dt-bindings/gpio/gpio.h> 15 #include <dt-bindings/input/input.h> 16 #include <dt-bindings/mfd/atmel-flexcom.h> 19 model = "Microchip SAMA5D2-ICP"; 20 compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; 25 serial3 = &uart3; /* mikro BUS 2 */ [all …]
|
H A D | at91-sama7g5ek.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board 11 /dts-v1/; 12 #include "sama7g5-pinfunc.h" 14 #include <dt-bindings/mfd/atmel-flexcom.h> 15 #include <dt-bindings/input/input.h> 16 #include <dt-bindings/pinctrl/at91.h> 17 #include <dt-bindings/sound/microchip,pdmc.h> 20 model = "Microchip SAMA7G5-EK"; 25 stdout-path = "serial0:115200n8"; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/mediatek/ |
H A D | mt8173-evb.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 7 /dts-v1/; 8 #include <dt-bindings/gpio/gpio.h> 13 chassis-type = "embedded"; 14 compatible = "mediatek,mt8173-evb", "mediatek,mt8173"; 20 serial3 = &uart3; 31 compatible = "hdmi-connector"; 37 remote-endpoint = <&hdmi0_out>; 43 compatible = "linux,extcon-usb-gpio"; 44 id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>; [all …]
|
H A D | mt8173.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 7 #include <dt-bindings/clock/mt8173-clk.h> 8 #include <dt-bindings/interrupt-controller/irq.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/memory/mt8173-larb-port.h> 11 #include <dt-bindings/phy/phy.h> 12 #include <dt-bindings/power/mt8173-power.h> 13 #include <dt-bindings/reset/mt8173-resets.h> 14 #include <dt-bindings/gce/mt8173-gce.h> 15 #include <dt-bindings/thermal/thermal.h> [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | am3517.dtsi | 4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 15 serial3 = &uart4; 21 compatible = "ti,omap3-musb"; 26 interrupt-names = "mc"; 30 compatible = "ti,am3517-emac"; 36 ti,davinci-ctrl-reg-offset = <0x10000>; 37 ti,davinci-ctrl-mod-reg-offset = <0>; 38 ti,davinci-ctrl-ram-offset = <0x20000>; 39 ti,davinci-ctrl-ram-size = <0x2000>; 40 ti,davinci-rmii-en = /bits/ 8 <1>; [all …]
|
H A D | omap36xx.dtsi | 4 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ 11 #include <dt-bindings/bus/ti-sysc.h> 12 #include <dt-bindings/media/omap3-isp.h> 18 serial3 = &uart4; 24 operating-points = < 30 clock-latency = <300000>; /* From legacy driver */ 36 compatible = "ti,omap3-uart"; 40 dma-names = "tx", "rx"; 42 clock-frequency = <48000000>; 45 abb_mpu_iva: regulator-abb-mpu { [all …]
|
H A D | tegra124-apalis.dts | 4 * This file is dual-licensed: you can use it either under the terms 42 /dts-v1/; 44 #include <dt-bindings/input/input.h> 49 compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1", 66 serial3 = &uartd; 73 stdout-path = "serial0:115200n8"; 80 pcie-controller@01003000 { 82 avddio-pex-supply = <&vdd_1v05>; 83 avdd-pex-pll-supply = <&vdd_1v05>; 84 avdd-pll-erefe-supply = <&avdd_1v05>; [all …]
|
H A D | am33xx.dtsi | 4 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/pinctrl/am33xx.h> 13 #include <dt-bindings/clock/am3.h> 17 interrupt-parent = <&intc>; 18 #address-cells = <1>; 19 #size-cells = <1>; 29 serial3 = &uart3; 32 d-can0 = &dcan0; 33 d-can1 = &dcan1; [all …]
|
H A D | dra7.dtsi | 2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/pinctrl/dra.h> 16 #address-cells = <2>; 17 #size-cells = <2>; 20 interrupt-parent = <&crossbar_mpu>; 32 serial3 = &uart4; 47 compatible = "arm,armv7-timer"; 52 interrupt-parent = <&gic>; 55 gic: interrupt-controller@48211000 { [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/mxs/ |
H A D | imx28.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 5 #include <dt-bindings/gpio/gpio.h> 6 #include "imx28-pinfunc.h" 9 #address-cells = <1>; 10 #size-cells = <1>; 12 interrupt-parent = <&icoll>; 15 * pre-existing /chosen node to be available to insert the 33 serial3 = &auart3; 42 #address-cells = <1>; 43 #size-cells = <0>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/ti/omap/ |
H A D | am3517.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ 11 /delete-node/ &aes1_target; 12 /delete-node/ &aes2_target; 16 serial3 = &uart4; 23 operating-points-v2 = <&cpu0_opp_table>; 25 clock-latency = <300000>; /* From legacy driver */ 29 cpu0_opp_table: opp-table { 30 compatible = "operating-points-v2-ti-cpu"; 37 opp-50-300000000 { [all …]
|
H A D | omap36xx.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 8 #include <dt-bindings/bus/ti-sysc.h> 9 #include <dt-bindings/media/omap3-isp.h> 15 serial3 = &uart4; 21 operating-points-v2 = <&cpu0_opp_table>; 23 vbb-supply = <&abb_mpu_iva>; 24 clock-latency = <300000>; /* From omap-cpufreq driver */ 25 #cooling-cells = <2>; 29 cpu0_opp_table: opp-table { [all …]
|
/openbmc/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-j7200-common-proc-board.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ 6 /dts-v1/; 8 #include "k3-j7200-som-p0.dtsi" 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/net/ti-dp83867.h> 11 #include <dt-bindings/phy/phy.h> 13 #include "k3-serdes.h" 16 compatible = "ti,j7200-evm", "ti,j7200"; 23 serial3 = &main_uart1; [all …]
|
/openbmc/linux/arch/arm/boot/dts/hisilicon/ |
H A D | hi3620.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2012-2013 HiSilicon Ltd. 6 * Copyright (C) 2012-2013 Linaro Ltd. 11 #include <dt-bindings/clock/hi3620-clock.h> 14 #address-cells = <1>; 15 #size-cells = <1>; 21 serial3 = &uart3; 26 compatible = "fixed-clock"; 27 #clock-cells = <0>; 28 clock-frequency = <26000000>; [all …]
|
/openbmc/linux/arch/riscv/boot/dts/canaan/ |
H A D | k210.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com> 6 #include <dt-bindings/clock/k210-clk.h> 7 #include <dt-bindings/pinctrl/k210-fpioa.h> 8 #include <dt-bindings/reset/k210-rst.h> 12 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits 15 #address-cells = <1>; 16 #size-cells = <1>; 17 compatible = "canaan,kendryte-k210"; 23 serial3 = &uart3; [all …]
|
/openbmc/linux/arch/arm/boot/dts/aspeed/ |
H A D | aspeed-g4.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 2 #include <dt-bindings/clock/aspeed-clock.h> 7 #address-cells = <1>; 8 #size-cells = <1>; 9 interrupt-parent = <&vic>; 29 serial3 = &uart4; 35 #address-cells = <1>; 36 #size-cells = <0>; 39 compatible = "arm,arm926ej-s"; 51 compatible = "simple-bus"; [all …]
|
H A D | aspeed-g6.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 4 #include <dt-bindings/interrupt-controller/arm-gic.h> 5 #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h> 6 #include <dt-bindings/clock/ast2600-clock.h> 11 #address-cells = <1>; 12 #size-cells = <1>; 13 interrupt-parent = <&gic>; 35 serial3 = &uart4; 47 #address-cells = <1>; 48 #size-cells = <0>; [all …]
|
H A D | aspeed-g5.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 2 #include <dt-bindings/clock/aspeed-clock.h> 3 #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h> 8 #address-cells = <1>; 9 #size-cells = <1>; 10 interrupt-parent = <&vic>; 30 serial3 = &uart4; 36 #address-cells = <1>; 37 #size-cells = <0>; 40 compatible = "arm,arm1176jzf-s"; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/nvidia/ |
H A D | tegra210-smaug.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/mfd/max77620.h> 6 #include <dt-bindings/pinctrl/pinctrl-tegra.h> 12 compatible = "google,smaug-rev8", "google,smaug-rev7", 13 "google,smaug-rev6", "google,smaug-rev5", 14 "google,smaug-rev4", "google,smaug-rev3", 15 "google,smaug-rev2", "google,smaug-rev1", 20 serial3 = &uartd; [all …]
|