| /openbmc/u-boot/arch/arm/mach-tegra/tegra20/ |
| H A D | pinmux.c | 298 PIN(DTB, RSVD1, RSVD2, VI, SPI1),
301 PIN(DTE, RSVD1, RSVD2, VI, SPI1),
332 PIN(SPIA, SPI1, SPI2, SPI3, GMI),
333 PIN(SPIB, SPI1, SPI2, SPI3, GMI),
334 PIN(SPIC, SPI1, SPI2, SPI3, GMI),
335 PIN(SPID, SPI2, SPI1, SPI2_ALT, GMI),
336 PIN(SPIE, SPI2, SPI1, SPI2_ALT, GMI),
337 PIN(SPIF, SPI3, SPI1, SPI2, RSVD4),
409 PIN(UDA, SPI1, RSVD2, UARTD, ULPI),
|
| /openbmc/u-boot/arch/arm/mach-tegra/tegra114/ |
| H A D | pinmux.c | 33 PIN(ULPI_CLK_PY0, SPI1, SPI5, UARTD, ULPI),
34 PIN(ULPI_DIR_PY1, SPI1, SPI5, UARTD, ULPI),
35 PIN(ULPI_NXT_PY2, SPI1, SPI5, UARTD, ULPI),
36 PIN(ULPI_STP_PY3, SPI1, SPI5, UARTD, ULPI),
250 PIN(GPIO_X3_AUD_PX3, SPI6, SPI1, RSVD3, RSVD4),
252 PIN(GPIO_X4_AUD_PX4, RSVD1, SPI1, SPI2, DAP2),
253 PIN(GPIO_X5_AUD_PX5, RSVD1, SPI1, SPI2, RSVD4),
254 PIN(GPIO_X6_AUD_PX6, SPI6, SPI1, SPI2, RSVD4),
255 PIN(GPIO_X7_AUD_PX7, RSVD1, SPI1, SPI2, RSVD4),
284 PIN(GPIO_W3_AUD_PW3, SPI6, SPI1, SPI2, I2C1),
|
| /openbmc/linux/arch/arm64/boot/dts/marvell/ |
| H A D | cn9131-db.dts | 14 /* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
15 * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
|
| H A D | cn9132-db-B.dts | 15 * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
16 * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
|
| H A D | cn9130-db.dts | 14 /* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
15 * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
|
| H A D | cn9132-db.dts | 14 /* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
15 * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
|
| H A D | cn9131-db-B.dts | 15 * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
16 * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
|
| H A D | cn9130-db-B.dts | 15 * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
16 * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
|
| H A D | armada-8040-clearfog-gt-8k.dts | 433 * [13] CP1 SPI1 MISO (TDM and SPI ROM shared)
434 * [14] CP1 SPI1 CS0n (64Mb SPI ROM)
435 * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared)
436 * [16] CP1 SPI1 CLK (TDM and SPI ROM shared)
|
| /openbmc/u-boot/arch/arm/mach-tegra/tegra124/ |
| H A D | pinmux.c | 33 PIN(ULPI_CLK_PY0, SPI1, SPI5, UARTD, ULPI),
34 PIN(ULPI_DIR_PY1, SPI1, SPI5, UARTD, ULPI),
35 PIN(ULPI_NXT_PY2, SPI1, SPI5, UARTD, ULPI),
36 PIN(ULPI_STP_PY3, SPI1, SPI5, UARTD, ULPI),
250 PIN(GPIO_X3_AUD_PX3, SPI6, SPI1, GMI, RSVD4),
252 PIN(GPIO_X4_AUD_PX4, GMI, SPI1, SPI2, DAP2),
253 PIN(GPIO_X5_AUD_PX5, GMI, SPI1, SPI2, RSVD4),
254 PIN(GPIO_X6_AUD_PX6, SPI6, SPI1, SPI2, GMI),
255 PIN(GPIO_X7_AUD_PX7, RSVD1, SPI1, SPI2, RSVD4),
286 PIN(GPIO_W3_AUD_PW3, SPI6, SPI1, SPI2, I2C1),
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | armada-8040-mcbin.dts | 225 * [12] SPI1 CS1n
226 * [13] SPI1 MISO (TDM and SPI ROM shared)
227 * [14] SPI1 CS0n
228 * [15] SPI1 MOSI (TDM and SPI ROM shared)
229 * [16] SPI1 CLK (TDM and SPI ROM shared)
|
| H A D | armada-8040-clearfog-gt-8k.dts | 214 * [13] CP1 SPI1 MISO (TDM and SPI ROM shared)
215 * [14] CP1 SPI1 CS0n (64Mb SPI ROM)
216 * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared)
217 * [16] CP1 SPI1 CLK (TDM and SPI ROM shared)
|
| /openbmc/linux/Documentation/devicetree/bindings/spi/ |
| H A D | brcm,bcm2835-aux-spi.txt | 1 Broadcom BCM2835 auxiliary SPI1/2 controller
5 auxiliary block. This binding applies to the SPI1/2 controller.
|
| /openbmc/u-boot/arch/arm/mach-tegra/tegra30/ |
| H A D | pinmux.c | 33 PIN(ULPI_CLK_PY0, SPI1, RSVD2, UARTD, ULPI),
34 PIN(ULPI_DIR_PY1, SPI1, RSVD2, UARTD, ULPI),
35 PIN(ULPI_NXT_PY2, SPI1, RSVD2, UARTD, ULPI),
36 PIN(ULPI_STP_PY3, SPI1, RSVD2, UARTD, ULPI),
247 PIN(SPI1_MOSI_PX4, SPI2, SPI1, SPI2_ALT, GMI),
248 PIN(SPI1_SCK_PX5, SPI2, SPI1, SPI2_ALT, GMI),
249 PIN(SPI1_CS0_N_PX6, SPI2, SPI1, SPI2_ALT, GMI),
250 PIN(SPI1_MISO_PX7, SPI3, SPI1, SPI2_ALT, RSVD4),
|
| /openbmc/u-boot/board/toradex/colibri_t30/ |
| H A D | pinmux-config-colibri_t30.h | 118 DEFAULT_PINMUX(ULPI_CLK_PY0, SPI1, NORMAL, NORMAL, INPUT),
119 DEFAULT_PINMUX(ULPI_DIR_PY1, SPI1, NORMAL, NORMAL, INPUT),
120 DEFAULT_PINMUX(ULPI_NXT_PY2, SPI1, NORMAL, NORMAL, INPUT),
121 DEFAULT_PINMUX(ULPI_STP_PY3, SPI1, NORMAL, NORMAL, INPUT),
271 DEFAULT_PINMUX(SPI1_MOSI_PX4, SPI1, NORMAL, NORMAL, INPUT),
272 DEFAULT_PINMUX(SPI1_SCK_PX5, SPI1, NORMAL, NORMAL, INPUT),
273 DEFAULT_PINMUX(SPI1_CS0_N_PX6, SPI1, NORMAL, NORMAL, INPUT),
274 DEFAULT_PINMUX(SPI1_MISO_PX7, SPI1, NORMAL, NORMAL, INPUT),
|
| /openbmc/u-boot/arch/arm/mach-tegra/tegra210/ |
| H A D | pinmux.c | 47 PIN(SPI1_MOSI_PC0, SPI1, RSVD1, RSVD2, RSVD3),
48 PIN(SPI1_MISO_PC1, SPI1, RSVD1, RSVD2, RSVD3),
49 PIN(SPI1_SCK_PC2, SPI1, RSVD1, RSVD2, RSVD3),
50 PIN(SPI1_CS0_PC3, SPI1, RSVD1, RSVD2, RSVD3),
51 PIN(SPI1_CS1_PC4, SPI1, RSVD1, RSVD2, RSVD3),
|
| /openbmc/linux/tools/testing/selftests/net/ |
| H A D | xfrm_policy.sh | 28 SPI1=0x1
411 do_esp ns3 10.0.3.1 10.0.3.10 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2
412 do_esp ns3 dead:3::1 dead:3::10 dead:1::/64 dead:2::/64 $SPI1 $SPI2
413 do_esp ns4 10.0.3.10 10.0.3.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1
414 do_esp ns4 dead:3::10 dead:3::1 dead:2::/64 dead:1::/64 $SPI2 $SPI1
|
| /openbmc/linux/Documentation/devicetree/bindings/clock/ |
| H A D | brcm,bcm2835-aux-clock.txt | 6 The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
|
| /openbmc/linux/arch/arm/boot/dts/nvidia/ |
| H A D | tegra30-apalis-eval.dts | 122 /* SPI1: Apalis SPI1 */
|
| H A D | tegra124-apalis-v1.2-eval.dts | 119 /* SPI1: Apalis SPI1 */
|
| H A D | tegra124-apalis-eval.dts | 117 /* SPI1: Apalis SPI1 */
|
| H A D | tegra30-apalis-v1.1-eval.dts | 123 /* SPI1: Apalis SPI1 */
|
| /openbmc/u-boot/board/nvidia/p2371-0000/ |
| H A D | pinmux-config-p2371-0000.h | 104 PINCFG(SPI1_MOSI_PC0, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
105 PINCFG(SPI1_MISO_PC1, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
106 PINCFG(SPI1_SCK_PC2, SPI1, DOWN, NORMAL, INPUT, DISABLE, DEFAULT),
107 PINCFG(SPI1_CS0_PC3, SPI1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
108 PINCFG(SPI1_CS1_PC4, SPI1, UP, NORMAL, INPUT, DISABLE, DEFAULT),
|
| /openbmc/u-boot/board/nvidia/e2220-1170/ |
| H A D | pinmux-config-e2220-1170.h | 113 PINCFG(SPI1_MOSI_PC0, SPI1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
114 PINCFG(SPI1_MISO_PC1, SPI1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
115 PINCFG(SPI1_SCK_PC2, SPI1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
116 PINCFG(SPI1_CS0_PC3, SPI1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
117 PINCFG(SPI1_CS1_PC4, SPI1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
|
| /openbmc/linux/drivers/pinctrl/tegra/ |
| H A D | pinctrl-tegra114.c | 1618 …PINGROUP(ulpi_clk_py0, SPI1, SPI5, UARTD, ULPI, 0x3020, N, N…
1619 …PINGROUP(ulpi_dir_py1, SPI1, SPI5, UARTD, ULPI, 0x3024, N, N…
1620 …PINGROUP(ulpi_nxt_py2, SPI1, SPI5, UARTD, ULPI, 0x3028, N, N…
1621 …PINGROUP(ulpi_stp_py3, SPI1, SPI5, UARTD, ULPI, 0x302c, N, N…
1764 …PINGROUP(gpio_x3_aud_px3, SPI6, SPI1, RSVD3, RSVD4, 0x3370, N, N…
1766 …PINGROUP(gpio_x4_aud_px4, RSVD1, SPI1, SPI2, DAP2, 0x3378, N, N…
1767 …PINGROUP(gpio_x5_aud_px5, RSVD1, SPI1, SPI2, RSVD4, 0x337c, N, N…
1768 …PINGROUP(gpio_x6_aud_px6, SPI6, SPI1, SPI2, RSVD4, 0x3380, N, N…
1769 …PINGROUP(gpio_x7_aud_px7, RSVD1, SPI1, SPI2, RSVD4, 0x3384, N, N…
1780 …PINGROUP(gpio_w3_aud_pw3, SPI6, SPI1, SPI2, I2C1, 0x33f0, N, N…
|