| /openbmc/u-boot/board/renesas/stout/ |
| H A D | cpld.c | 18 #define MISO (92 + 27) macro
48 data |= gpio_get_value(MISO); /* MSB first */ in cpld_read()
96 gpio_request(MISO, "MISO"); in cpld_init()
101 gpio_direction_input(MISO); in cpld_init()
|
| /openbmc/linux/Documentation/spi/ |
| H A D | butterfly.rst | 38 MISO J403.PB3/MISO pin 11/S7,nBUSY
69 MISO J403.PE6/DO pin 12/S5,nPAPEROUT
|
| /openbmc/linux/Documentation/driver-api/ |
| H A D | spi.rst | 8 line, and a "Master In, Slave Out" (MISO) data line. SPI is a full
10 another is shifted in on the MISO line. Those bits are assembled into
|
| /openbmc/linux/Documentation/devicetree/bindings/iio/adc/ |
| H A D | renesas,rcar-gyroadc.yaml | 82 of the TI/ADI chips to the GyroADC, while MISO line of each
90 of the MAX chips to the GyroADC, while MISO line of each Maxim
|
| H A D | adi,ad7476.yaml | 16 on MISO when the clock toggles.
|
| /openbmc/u-boot/doc/device-tree-bindings/spi/ |
| H A D | soft-spi.txt | 15 gpio-miso: GPIO to use for SPI MISO line (input)
|
| H A D | spi-bus.txt | 61 used for MISO. Defaults to 1 if not present.
|
| /openbmc/linux/Documentation/devicetree/bindings/spi/ |
| H A D | spi-gpio.yaml | 28 description: GPIO spec for the MISO line to use
|
| H A D | spi-mux.yaml | 17 MISO |/------------------------------+|-------+|-------+|-------\|
|
| /openbmc/linux/Documentation/devicetree/bindings/leds/ |
| H A D | leds-spi-byte.txt | 7 - no return value is necessary (no MISO signal)
|
| /openbmc/linux/arch/arm64/boot/dts/renesas/ |
| H A D | rzg2ul-smarc-pinfunction.dtsi | 111 <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */
|
| H A D | rzg2lc-smarc-pinfunction.dtsi | 121 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
|
| H A D | rzg2l-smarc-pinfunction.dtsi | 135 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | armada-8040-clearfog-gt-8k.dts | 213 * [9.11]CP1 SPI0 MOSI/MISO/CLK
214 * [13] CP1 SPI1 MISO (TDM and SPI ROM shared)
|
| H A D | armada-8040-mcbin.dts | 226 * [13] SPI1 MISO (TDM and SPI ROM shared)
|
| H A D | sun7i-a20-bananapi.dts | 251 "SPI-MISO", "SPI-CE1", "",
|
| H A D | armada-385-turris-omnia.dts | 377 /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
|
| /openbmc/linux/Documentation/hwmon/ |
| H A D | lm70.rst | 46 comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's
|
| /openbmc/linux/arch/arm/boot/dts/microchip/ |
| H A D | lan966x-kontron-kswitch-d10-mmt.dtsi | 56 /* SCK, MISO, MOSI */
|
| /openbmc/linux/arch/arm64/boot/dts/marvell/ |
| H A D | armada-8040-clearfog-gt-8k.dts | 432 * [9.11]CP1 SPI0 MOSI/MISO/CLK
433 * [13] CP1 SPI1 MISO (TDM and SPI ROM shared)
|
| /openbmc/linux/Documentation/devicetree/bindings/display/panel/ |
| H A D | panel-mipi-dbi-spi.yaml | 77 Controller is not readable (ie. Din (MISO on the SPI interface) is not
|
| /openbmc/linux/arch/arm64/boot/dts/amlogic/ |
| H A D | meson-gxl-s805x-libretech-ac.dts | 248 "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk",
|
| /openbmc/linux/arch/arm64/boot/dts/qcom/ |
| H A D | sm8550.dtsi | 3301 /* MISO, MOSI, CLK */
3316 /* MISO, MOSI, CLK */
3331 /* MISO, MOSI, CLK */
3346 /* MISO, MOSI, CLK */
3361 /* MISO, MOSI, CLK */
3376 /* MISO, MOSI, CLK */
3391 /* MISO, MOSI, CLK */
3406 /* MISO, MOSI, CLK */
3421 /* MISO, MOSI, CLK */
3436 /* MISO, MOSI, CLK */
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/allwinner/ |
| H A D | sun7i-a20-bananapi.dts | 247 "SPI-MISO", "SPI-CE1", "",
|
| /openbmc/linux/arch/arm/boot/dts/intel/pxa/ |
| H A D | pxa300-raumfeld-common.dtsi | 333 MFP_PIN_PXA300(98) MFP_AF0 /* MISO */
|