/openbmc/linux/drivers/net/ethernet/chelsio/cxgb/ |
H A D | mv88e1xxx.c | 125 static int mv88e1xxx_set_speed_duplex(struct cphy *phy, int speed, int duplex) in mv88e1xxx_set_speed_duplex() argument 130 if (speed >= 0) { in mv88e1xxx_set_speed_duplex() 132 if (speed == SPEED_100) in mv88e1xxx_set_speed_duplex() 134 else if (speed == SPEED_1000) in mv88e1xxx_set_speed_duplex() 242 int *speed, int *duplex, int *fc) in mv88e1xxx_get_link_status() argument 265 if (speed) in mv88e1xxx_get_link_status() 266 *speed = sp; in mv88e1xxx_get_link_status()
|
/openbmc/linux/tools/spi/ |
H A D | spidev_test.c | 43 static uint32_t speed = 500000; variable 127 .speed_hz = speed, in transfer() 251 speed = atoi(optarg); in parse_opts() 487 ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); in main() 491 ret = ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed); in main() 497 printf("max speed: %u Hz (%u kHz)\n", speed, speed/1000); in main()
|
/openbmc/linux/drivers/gpu/drm/amd/display/dc/dce/ |
H A D | dce_i2c_sw.c | 342 uint32_t speed) in dce_i2c_sw_engine_set_speed() argument 344 ASSERT(speed); in dce_i2c_sw_engine_set_speed() 346 engine->speed = speed ? speed : DCE_I2C_DEFAULT_I2C_SW_SPEED; in dce_i2c_sw_engine_set_speed() 348 engine->clock_delay = 1000 / engine->speed; in dce_i2c_sw_engine_set_speed() 475 dce_i2c_sw_engine_set_speed(dce_i2c_sw, cmd->speed); in dce_i2c_submit_command_sw()
|
/openbmc/linux/drivers/gpu/drm/nouveau/nvkm/subdev/pci/ |
H A D | gf100.c | 72 gf100_pcie_set_link(struct nvkm_pci *pci, enum nvkm_pcie_speed speed, u8 width) in gf100_pcie_set_link() argument 74 gf100_pcie_set_cap_speed(pci, speed == NVKM_PCIE_SPEED_5_0); in gf100_pcie_set_link() 75 g84_pcie_set_link_speed(pci, speed); in gf100_pcie_set_link()
|
/openbmc/qemu/tests/qemu-iotests/ |
H A D | 109.out | 38 …BLOCK_JOB_READY", "data": {"device": "src", "len": 1024, "offset": 1024, "speed": 0, "type": "mirr… 48 …K_JOB_CANCELLED", "data": {"device": "src", "len": 1024, "offset": 1024, "speed": 0, "type": "mirr… 89 …K_JOB_READY", "data": {"device": "src", "len": 197120, "offset": 197120, "speed": 0, "type": "mirr… 140 …K_JOB_READY", "data": {"device": "src", "len": 327680, "offset": 327680, "speed": 0, "type": "mirr… 191 …BLOCK_JOB_READY", "data": {"device": "src", "len": 1024, "offset": 1024, "speed": 0, "type": "mirr… 242 …OCK_JOB_READY", "data": {"device": "src", "len": 65536, "offset": 65536, "speed": 0, "type": "mirr… 293 …BLOCK_JOB_READY", "data": {"device": "src", "len": 2560, "offset": 2560, "speed": 0, "type": "mirr… 343 …BLOCK_JOB_READY", "data": {"device": "src", "len": 2560, "offset": 2560, "speed": 0, "type": "mirr… 493 …BLOCK_JOB_READY", "data": {"device": "src", "len": 2048, "offset": 2048, "speed": 0, "type": "mirr… 523 … "BLOCK_JOB_READY", "data": {"device": "src", "len": 512, "offset": 512, "speed": 0, "type": "mirr… [all …]
|
H A D | 030 | 251 speed=1024) 263 self.vm.cmd('block-job-set-speed', device=job, speed=0) 292 filter_node_name='stream-filter', speed=1024*1024) 320 self.vm.cmd('block-job-set-speed', device='stream-node4', speed=0) 355 self.vm.cmd('block-job-set-speed', device='commit-node3', speed=0) 392 filter_node_name='commit-filter', speed=1024*1024) 399 self.vm.cmd('block-job-set-speed', device='drive0', speed=0) 414 filter_node_name='commit-filter', speed=1024*1024) 420 self.vm.cmd('block-job-set-speed', device='drive0', speed=0) 475 self.vm.cmd('block-job-set-speed', device=job, speed=0) [all …]
|
H A D | 185.out | 38 'speed': 65536 } } 49 …ANCELLED", "data": {"device": "disk", "len": 67108864, "offset": 524288, "speed": 65536, "type": "… 61 'speed': 65536 } } 72 …ANCELLED", "data": {"device": "disk", "len": 4194304, "offset": 4194304, "speed": 65536, "type": "… 86 'speed': 65536 } } 98 …ANCELLED", "data": {"device": "disk", "len": 4194304, "offset": 4194304, "speed": 65536, "type": "… 112 'speed': 65536, 127 …CANCELLED", "data": {"device": "disk", "len": 67108864, "offset": 65536, "speed": 65536, "type": "… 138 'speed': 65536 } } 168 …: "BLOCK_JOB_READY", "data": {"device": "mirror", "len": 0, "offset": 0, "speed": 0, "type": "mirr… [all …]
|
/openbmc/linux/drivers/usb/gadget/udc/ |
H A D | Kconfig | 39 full speed USB Device Port with support for five configurable 123 speed USB device controllers, with support for up to 30 138 an integrated full speed USB 1.1 device controller. The 163 supports both full and high speed USB 2.0 data transfers. 222 an integrated full speed USB 1.1 device controller. 237 full speed USB peripheral. 244 controller, which support super speed USB peripheral. 284 supports both full and high speed USB 2.0 data transfers. 334 both full and high speed USB 2.0 data transfers. 366 supports full, high speed USB 2.0 and super speed USB 3.0 [all …]
|
/openbmc/u-boot/drivers/net/phy/ |
H A D | mv88e61xx.c | 461 unsigned int speed; in mv88e61xx_parse_status() local 499 speed = mii_reg & PHY_REG_STATUS1_SPEED; in mv88e61xx_parse_status() 501 switch (speed) { in mv88e61xx_parse_status() 503 phydev->speed = SPEED_1000; in mv88e61xx_parse_status() 506 phydev->speed = SPEED_100; in mv88e61xx_parse_status() 509 phydev->speed = SPEED_10; in mv88e61xx_parse_status() 680 phydev->speed = SPEED_1000; in mv88e61xx_read_port_config() 683 phydev->speed = SPEED_100; in mv88e61xx_read_port_config() 686 phydev->speed = SPEED_10; in mv88e61xx_read_port_config() 994 int speed = phydev->speed; in mv88e61xx_phy_startup() local [all …]
|
/openbmc/linux/drivers/net/ethernet/dlink/ |
H A D | dl2k.c | 164 np->speed = 100; in rio_probe1() 168 np->speed = 100; in rio_probe1() 172 np->speed = 10; in rio_probe1() 176 np->speed = 10; in rio_probe1() 180 np->speed=1000; in rio_probe1() 1264 cmd->base.speed = np->speed; in rio_get_link_ksettings() 1289 u32 speed = cmd->base.speed; in rio_set_link_ksettings() local 1308 switch (speed) { in rio_set_link_ksettings() 1310 np->speed = 10; in rio_set_link_ksettings() 1527 np->speed = 10; in mii_get_media() [all …]
|
/openbmc/u-boot/doc/device-tree-bindings/clock/ |
H A D | rockchip,rk3368-dmc.txt | 8 (b) a speed-bin (as defined in JESD-79) for the DDR3 used in hardware 18 - rockchip,ddr-speed-bin 19 the DDR3 device's speed-bin (as specified according to JESD-79) 64 rockchip,ddr-speed-bin = <DDR3_1600K>;
|
/openbmc/linux/drivers/net/usb/ |
H A D | aqc111.c | 245 switch (speed) { in aqc111_speed_to_link_mode() 271 u32 speed = SPEED_UNKNOWN; in aqc111_get_link_ksettings() local 302 speed = SPEED_5000; in aqc111_get_link_ksettings() 305 speed = SPEED_2500; in aqc111_get_link_ksettings() 308 speed = SPEED_1000; in aqc111_get_link_ksettings() 311 speed = SPEED_100; in aqc111_get_link_ksettings() 315 elk->base.speed = speed; in aqc111_get_link_ksettings() 333 switch (speed) { in aqc111_set_phy_speed() 348 switch (speed) { in aqc111_set_phy_speed() 374 u32 speed = elk->base.speed; in aqc111_set_link_ksettings() local [all …]
|
/openbmc/linux/drivers/bluetooth/ |
H A D | hci_bcm.c | 586 unsigned int speed; in bcm_setup() local 603 speed = bcm->dev->init_speed; in bcm_setup() 605 speed = hu->proto->init_speed; in bcm_setup() 607 speed = 0; in bcm_setup() 609 if (speed) in bcm_setup() 610 host_set_baudrate(hu, speed); in bcm_setup() 614 speed = hu->oper_speed; in bcm_setup() 616 speed = bcm->dev->oper_speed; in bcm_setup() 618 speed = hu->proto->oper_speed; in bcm_setup() 620 speed = 0; in bcm_setup() [all …]
|
/openbmc/linux/drivers/net/ethernet/sfc/ |
H A D | mcdi_port_common.c | 283 u32 speed, u32 flags, u32 fcntl) in efx_mcdi_phy_decode_link() argument 306 link_state->speed = speed; in efx_mcdi_phy_decode_link() 514 efx->link_state.speed == 25000 || in efx_mcdi_phy_probe() 515 efx->link_state.speed == 50000); in efx_mcdi_phy_probe() 544 cmd->base.speed = efx->link_state.speed; in efx_mcdi_phy_get_link_ksettings() 577 switch (cmd->base.speed) { in efx_mcdi_phy_set_link_ksettings() 589 switch (cmd->base.speed) { in efx_mcdi_phy_set_link_ksettings() 632 is_25g = speed == 25000 || speed == 50000; in efx_mcdi_phy_get_fecparam() 637 if (speed == 100000) in efx_mcdi_phy_get_fecparam() 1280 u32 flags, fcntl, speed, lpa; in efx_mcdi_process_link_change() local [all …]
|
/openbmc/linux/drivers/net/ethernet/sfc/siena/ |
H A D | mcdi_port_common.c | 284 u32 speed, u32 flags, u32 fcntl) in efx_mcdi_phy_decode_link() argument 307 link_state->speed = speed; in efx_mcdi_phy_decode_link() 515 efx->link_state.speed == 25000 || in efx_siena_mcdi_phy_probe() 516 efx->link_state.speed == 50000); in efx_siena_mcdi_phy_probe() 546 cmd->base.speed = efx->link_state.speed; in efx_siena_mcdi_phy_get_link_ksettings() 581 switch (cmd->base.speed) { in efx_siena_mcdi_phy_set_link_ksettings() 593 switch (cmd->base.speed) { in efx_siena_mcdi_phy_set_link_ksettings() 637 is_25g = speed == 25000 || speed == 50000; in efx_siena_mcdi_phy_get_fecparam() 642 if (speed == 100000) in efx_siena_mcdi_phy_get_fecparam() 1263 u32 flags, fcntl, speed, lpa; in efx_siena_mcdi_process_link_change() local [all …]
|
/openbmc/linux/Documentation/userspace-api/media/v4l/ |
H A D | vidioc-decoder-cmd.rst | 91 - ``speed`` 92 - Playback speed and direction. The playback speed is defined as 93 ``speed``/1000 of the normal speed. So 1000 is normal playback. 95 playback at normal speed. Speeds -1, 0 and 1 have special 96 meanings: speed 0 is shorthand for 1000 (normal playback). A speed 97 of 1 steps just one frame forward, a speed of -1 steps just one 146 this command will just change the playback speed. That means that 151 muted when playing back at a non-standard speed.
|
/openbmc/linux/Documentation/i2c/busses/ |
H A D | i2c-ismt.rst | 18 Allows changing of the bus speed. Normally, the bus speed is set by the BIOS 21 Specify the bus speed in kHz.
|
/openbmc/u-boot/tools/gdb/ |
H A D | gdbsend.c | 19 speed_t speed = B230400; variable 48 if ((speed = cvtspeed(optarg)) == B0) in main() 100 if ((sfd = serialopen(serialdev, speed)) < 0) in main()
|
/openbmc/linux/drivers/gnss/ |
H A D | serial.c | 32 serdev_device_set_baudrate(serdev, gserial->speed); in gnss_serial_open() 114 u32 speed = 4800; in gnss_serial_parse_dt() local 116 of_property_read_u32(node, "current-speed", &speed); in gnss_serial_parse_dt() 118 gserial->speed = speed; in gnss_serial_parse_dt()
|
/openbmc/openbmc/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-events-config/witherspoon/ |
H A D | events.yaml | 255 - speed 265 - speed 305 - speed 371 speed: 393 speed: 400 speed: 407 speed: 414 speed: 641 speed: 677 speed: [all …]
|
/openbmc/openbmc/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/ |
H A D | phosphor-pid-control_%.bbappend | 4 SRC_URI:append:olympus-nuvoton = " file://fan-full-speed.sh" 8 FILES:${PN}:append:olympus-nuvoton = " ${bindir}/fan-full-speed.sh" 18 install -m 0755 ${WORKDIR}/fan-full-speed.sh ${D}/${bindir}
|
/openbmc/linux/tools/usb/usbip/src/ |
H A D | usbip_attach.c | 85 uint32_t speed = udev->speed; in import_device() local 94 port = usbip_vhci_get_free_port(speed); in import_device() 103 udev->devnum, udev->speed); in import_device()
|
/openbmc/linux/drivers/net/ethernet/stmicro/stmmac/ |
H A D | dwmac-sti.c | 105 u32 speed; member 106 void (*fix_retime_src)(void *priv, unsigned int speed, unsigned int mode); 110 void (*fix_retime_src)(void *priv, unsigned int speed, unsigned int mode); 190 dwmac->fix_retime_src(dwmac, dwmac->speed, 0); in sti_dwmac_set_mode() 230 dwmac->speed = SPEED_100; in sti_dwmac_parse_data() 246 dwmac->speed = SPEED_1000; in sti_dwmac_parse_data()
|
/openbmc/linux/Documentation/admin-guide/acpi/ |
H A D | fan_performance_states.rst | 43 * ``control_percent``: The percent value to be used to set the fan speed to a 67 When _FIF object specifies support for fine grain control, then fan speed 69 _FSL object. User can adjust fan speed using thermal sysfs cooling device. 71 Here use can look at fan performance states for a reference speed (speed_rpm) 86 This includes field to provide current fan speed in revolutions per minute 89 This speed is presented in the sysfs using the attribute "fan_speed_rpm",
|
/openbmc/linux/drivers/ata/ |
H A D | pata_pdc202xx_old.c | 150 int speed = adev->dma_mode - XFER_UDMA_0; in pdc202xx_set_dmamode() local 151 r_bp |= udma_timing[speed][0]; in pdc202xx_set_dmamode() 152 r_cp |= udma_timing[speed][1]; in pdc202xx_set_dmamode() 155 int speed = adev->dma_mode - XFER_MW_DMA_0; in pdc202xx_set_dmamode() local 156 r_bp |= mdma_timing[speed][0]; in pdc202xx_set_dmamode() 157 r_cp |= mdma_timing[speed][1]; in pdc202xx_set_dmamode()
|