/openbmc/linux/arch/arm/boot/dts/aspeed/ |
H A D | aspeed-bmc-inventec-starscream.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 4 /dts-v1/; 6 #include "aspeed-g6.dtsi" 7 #include "aspeed-g6-pinctrl.dtsi" 8 #include <dt-bindings/i2c/i2c.h> 9 #include <dt-bindings/gpio/aspeed-gpio.h> 13 compatible = "inventec,starscream-bmc", "aspeed,ast2600"; 20 stdout-path = &uart5; 28 reserved-memory { 29 #address-cells = <1>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/samsung/ |
H A D | exynos5410.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 14 #include <dt-bindings/clock/exynos5410.h> 15 #include <dt-bindings/clock/exynos-audss-clk.h> 16 #include <dt-bindings/interrupt-controller/arm-gic.h> 20 interrupt-parent = <&gic>; 30 #address-cells = <1>; 31 #size-cells = <0>; 35 compatible = "arm,cortex-a15"; 37 clock-frequency = <1600000000>; 40 cpu1: cpu@1 { label [all …]
|
H A D | exynos5250.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 17 #include <dt-bindings/clock/exynos5250.h> 19 #include "exynos4-cpu-thermal.dtsi" 20 #include <dt-bindings/clock/exynos-audss-clk.h> 46 #address-cells = <1>; 47 #size-cells = <0>; 49 cpu-map { 55 cpu = <&cpu1>; 62 compatible = "arm,cortex-a15"; 65 clock-names = "cpu"; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/qcom/ |
H A D | ipq9574.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 5 * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. 9 #include <dt-bindings/clock/qcom,apss-ipq.h> 10 #include <dt-bindings/clock/qcom,ipq9574-gcc.h> 11 #include <dt-bindings/interrupt-controller/arm-gic.h> 12 #include <dt-bindings/reset/qcom,ipq9574-gcc.h> 13 #include <dt-bindings/thermal/thermal.h> 16 interrupt-parent = <&intc>; 17 #address-cells = <2>; 18 #size-cells = <2>; [all …]
|
H A D | sm8350.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 6 #include <dt-bindings/interconnect/qcom,sm8350.h> 7 #include <dt-bindings/interrupt-controller/arm-gic.h> 8 #include <dt-bindings/clock/qcom,dispcc-sm8350.h> 9 #include <dt-bindings/clock/qcom,gcc-sm8350.h> 10 #include <dt-bindings/clock/qcom,gpucc-sm8350.h> 11 #include <dt-bindings/clock/qcom,rpmh.h> 12 #include <dt-bindings/dma/qcom-gpi.h> 13 #include <dt-bindings/gpio/gpio.h> 14 #include <dt-bindings/interconnect/qcom,sm8350.h> [all …]
|
H A D | qcs404.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/clock/qcom,gcc-qcs404.h> 8 #include <dt-bindings/clock/qcom,turingcc-qcs404.h> 9 #include <dt-bindings/clock/qcom,rpmcc.h> 10 #include <dt-bindings/power/qcom-rpmpd.h> 11 #include <dt-bindings/thermal/thermal.h> 14 interrupt-parent = <&intc>; 16 #address-cells = <2>; 17 #size-cells = <2>; [all …]
|
H A D | msm8939.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. 4 * Copyright (c) 2020-2023, Linaro Limited 7 #include <dt-bindings/clock/qcom,gcc-msm8939.h> 8 #include <dt-bindings/clock/qcom,rpmcc.h> 9 #include <dt-bindings/interconnect/qcom,msm8939.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/power/qcom-rpmpd.h> 12 #include <dt-bindings/reset/qcom,gcc-msm8939.h> 13 #include <dt-bindings/thermal/thermal.h> [all …]
|
H A D | sm8150.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. 7 #include <dt-bindings/dma/qcom-gpi.h> 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 9 #include <dt-bindings/power/qcom-rpmpd.h> 10 #include <dt-bindings/soc/qcom,rpmh-rsc.h> 11 #include <dt-bindings/clock/qcom,rpmh.h> 12 #include <dt-bindings/clock/qcom,dispcc-sm8150.h> 13 #include <dt-bindings/clock/qcom,gcc-sm8150.h> 14 #include <dt-bindings/clock/qcom,gpucc-sm8150.h> [all …]
|
H A D | ipq8074.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/clock/qcom,gcc-ipq8074.h> 10 #address-cells = <2>; 11 #size-cells = <2>; 15 interrupt-parent = <&intc>; 19 compatible = "fixed-clock"; 20 clock-frequency = <32768>; 21 #clock-cells = <0>; 25 compatible = "fixed-clock"; [all …]
|
H A D | msm8916.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. 6 #include <dt-bindings/arm/coresight-cti-dt.h> 7 #include <dt-bindings/clock/qcom,gcc-msm8916.h> 8 #include <dt-bindings/clock/qcom,rpmcc.h> 9 #include <dt-bindings/interconnect/qcom,msm8916.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/power/qcom-rpmpd.h> 12 #include <dt-bindings/reset/qcom,gcc-msm8916.h> 13 #include <dt-bindings/thermal/thermal.h> [all …]
|
H A D | sc7180.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 5 * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. 8 #include <dt-bindings/clock/qcom,dispcc-sc7180.h> 9 #include <dt-bindings/clock/qcom,gcc-sc7180.h> 10 #include <dt-bindings/clock/qcom,gpucc-sc7180.h> 11 #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h> 12 #include <dt-bindings/clock/qcom,rpmh.h> 13 #include <dt-bindings/clock/qcom,videocc-sc7180.h> 14 #include <dt-bindings/interconnect/qcom,icc.h> 15 #include <dt-bindings/interconnect/qcom,osm-l3.h> [all …]
|
/openbmc/linux/arch/arm/boot/dts/axis/ |
H A D | artpec6.dtsi | 2 * Device Tree Source for the Axis ARTPEC-6 SoC 4 * This file is dual-licensed: you can use it either under the terms 43 #include <dt-bindings/interrupt-controller/arm-gic.h> 44 #include <dt-bindings/dma/nbpfaxi.h> 45 #include <dt-bindings/clock/axis,artpec6-clkctrl.h> 48 #address-cells = <1>; 49 #size-cells = <1>; 51 interrupt-parent = <&intc>; 54 #address-cells = <1>; 55 #size-cells = <0>; [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | imx7d.dtsi | 5 * This file is dual-licensed: you can use it either under the terms 49 operating-points = < 54 clock-frequency = <996000000>; 57 cpu1: cpu@1 { label 58 compatible = "arm,cortex-a7"; 61 clock-frequency = <996000000>; 67 compatible = "arm,coresight-etm3x", "arm,primecell"; 72 * without arm,primecell-periphid because amba bus try to 75 arm,primecell-periphid = <0xbb956>; 76 cpu = <&cpu1>; [all …]
|
H A D | r8a7792.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/clock/r8a7792-cpg-mssr.h> 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/power/r8a7792-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 38 compatible = "fixed-clock"; 39 #clock-cells = <0>; 41 clock-frequency = <0>; [all …]
|
H A D | rk3036.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/interrupt-controller/irq.h> 5 #include <dt-bindings/interrupt-controller/arm-gic.h> 6 #include <dt-bindings/pinctrl/rockchip.h> 7 #include <dt-bindings/clock/rk3036-cru.h> 13 interrupt-parent = <&gic>; 32 arm-pmu { 33 compatible = "arm,cortex-a7-pmu"; 36 interrupt-affinity = <&cpu0>, <&cpu1>; [all …]
|
H A D | r8a7793.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2014-2015 Renesas Electronics Corporation 8 #include <dt-bindings/clock/r8a7793-cpg-mssr.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/interrupt-controller/irq.h> 11 #include <dt-bindings/power/r8a7793-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 37 compatible = "fixed-clock"; 38 #clock-cells = <0>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/renesas/ |
H A D | r8a7792.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car V2H (R8A77920) SoC 8 #include <dt-bindings/clock/r8a7792-cpg-mssr.h> 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/power/r8a7792-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 39 compatible = "fixed-clock"; 40 #clock-cells = <0>; [all …]
|
H A D | r8a77470.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/interrupt-controller/irq.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/clock/r8a77470-cpg-mssr.h> 11 #include <dt-bindings/power/r8a77470-sysc.h> 14 #address-cells = <2>; 15 #size-cells = <2>; 26 #address-cells = <1>; 27 #size-cells = <0>; 31 compatible = "arm,cortex-a7"; [all …]
|
H A D | r8a7793.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car M2-N (R8A77930) SoC 5 * Copyright (C) 2014-2015 Renesas Electronics Corporation 8 #include <dt-bindings/clock/r8a7793-cpg-mssr.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/interrupt-controller/irq.h> 11 #include <dt-bindings/power/r8a7793-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 37 compatible = "fixed-clock"; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/amlogic/ |
H A D | meson-gx.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/interrupt-controller/irq.h> 14 #include <dt-bindings/interrupt-controller/arm-gic.h> 15 #include <dt-bindings/power/meson-gxbb-power.h> 16 #include <dt-bindings/thermal/thermal.h> 19 interrupt-parent = <&gic>; 20 #address-cells = <2>; 21 #size-cells = <2>; 29 reserved-memory { [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx7d.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ OR MIT 7 #include <dt-bindings/reset/imx7-reset.h> 18 clock-frequency = <996000000>; 19 operating-points-v2 = <&cpu0_opp_table>; 20 #cooling-cells = <2>; 21 nvmem-cells = <&fuse_grade>; 22 nvmem-cell-names = "speed_grade"; 25 cpu1: cpu@1 { label 26 compatible = "arm,cortex-a7"; 29 clock-frequency = <996000000>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/rockchip/ |
H A D | rv1126.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/clock/rockchip,rv1126-cru.h> 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include <dt-bindings/pinctrl/rockchip.h> 11 #include <dt-bindings/power/rockchip,rv1126-power.h> 12 #include <dt-bindings/soc/rockchip,boot-mode.h> 15 #address-cells = <1>; 16 #size-cells = <1>; [all …]
|
H A D | rk322x.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/interrupt-controller/irq.h> 5 #include <dt-bindings/interrupt-controller/arm-gic.h> 6 #include <dt-bindings/pinctrl/rockchip.h> 7 #include <dt-bindings/clock/rk3228-cru.h> 8 #include <dt-bindings/thermal/thermal.h> 9 #include <dt-bindings/power/rk3228-power.h> 12 #address-cells = <1>; 13 #size-cells = <1>; [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/net/ |
H A D | marvell,pp2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Marcin Wojtas <mw@semihalf.com> 11 - Russell King <linux@armlinux.org> 21 - marvell,armada-375-pp2 22 - marvell,armada-7k-pp22 28 "#address-cells": 31 "#size-cells": 37 - description: main controller clock [all …]
|
/openbmc/linux/arch/arm/boot/dts/st/ |
H A D | ste-dbx5x0.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 6 #include <dt-bindings/interrupt-controller/irq.h> 7 #include <dt-bindings/interrupt-controller/arm-gic.h> 8 #include <dt-bindings/clock/ste-db8500-clkout.h> 9 #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h> 10 #include <dt-bindings/mfd/dbx500-prcmu.h> 11 #include <dt-bindings/arm/ux500_pm_domains.h> 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/thermal/thermal.h> 16 #address-cells = <1>; [all …]
|