/openbmc/linux/Documentation/devicetree/bindings/clock/ |
H A D | imx8qxp-lpcg.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock 10 - Aisheng Dong <aisheng.dong@nxp.com> 13 The Low-Power Clock Gate (LPCG) modules contain a local programming 14 model to control the clock gates for the peripherals. An LPCG module 17 This level of clock gating is provided after the clocks are generated 18 by the SCU resources and clock controls. Thus even if the clock is [all …]
|
H A D | fsl,scu-clk.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: i.MX SCU Client Device Node - Clock Controller Based on SCU Message Protocol 10 - Abel Vesa <abel.vesa@nxp.com> 13 Client nodes are maintained as children of the relevant IMX-SCU device node. 14 This binding uses the common clock binding. 15 (Documentation/devicetree/bindings/clock/clock-bindings.txt) 16 The clock consumer should specify the desired clock by having the clock [all …]
|
H A D | fsl,imx8-acm.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/clock/fsl,imx8-acm.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: NXP i.MX8 Audio Clock Mux 10 - Shengjiu Wang <shengjiu.wang@nxp.com> 13 NXP i.MX8 Audio Clock Mux is dedicated clock muxing IP 14 used to control Audio related clock on the SoC. 19 - fsl,imx8dxl-acm 20 - fsl,imx8qm-acm [all …]
|
/openbmc/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8qm-ss-dma.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright 2018-2019 NXP 8 uart4_lpcg: clock-controller@5a4a0000 { 9 compatible = "fsl,imx8qxp-lpcg"; 11 #clock-cells = <1>; 14 clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; 15 clock-output-names = "uart4_lpcg_baud_clk", 17 power-domains = <&pd IMX_SC_R_UART_4>; 20 can1_lpcg: clock-controller@5ace0000 { 21 compatible = "fsl,imx8qxp-lpcg"; [all …]
|
H A D | imx8-ss-dma.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright 2018-2019 NXP 7 #include <dt-bindings/clock/imx8-lpcg.h> 8 #include <dt-bindings/firmware/imx/rsrc.h> 11 compatible = "simple-bus"; 12 #address-cells = <1>; 13 #size-cells = <1>; 16 dma_ipg_clk: clock-dma-ipg { 17 compatible = "fixed-clock"; 18 #clock-cells = <0>; [all …]
|
H A D | imx8qxp.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 4 * Copyright 2017-2020 NXP 8 #include <dt-bindings/clock/imx8-clock.h> 9 #include <dt-bindings/clock/imx8-lpcg.h> 10 #include <dt-bindings/firmware/imx/rsrc.h> 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/input/input.h> 13 #include <dt-bindings/interrupt-controller/arm-gic.h> 14 #include <dt-bindings/pinctrl/pads-imx8qxp.h> 15 #include <dt-bindings/thermal/thermal.h> [all …]
|
H A D | imx8dxl-ss-adma.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 7 clock-frequency = <160000000>; 11 clock-frequency = <160000000>; 19 compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; 24 compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; 29 compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; 34 compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; 39 compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart"; 44 compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart"; 49 compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart"; [all …]
|
H A D | imx8-ss-lsio.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright 2018-2020 NXP 7 #include <dt-bindings/clock/imx8-lpcg.h> 8 #include <dt-bindings/firmware/imx/rsrc.h> 11 compatible = "simple-bus"; 12 #address-cells = <1>; 13 #size-cells = <1>; 17 lsio_mem_clk: clock-lsio-mem { 18 compatible = "fixed-clock"; 19 #clock-cells = <0>; [all …]
|
H A D | imx8dxl-ss-conn.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /delete-node/ &enet1_lpcg; 7 /delete-node/ &fec2; 10 conn_enet0_root_clk: clock-conn-enet0-root { 11 compatible = "fixed-clock"; 12 #clock-cells = <0>; 13 clock-frequency = <250000000>; 14 clock-output-names = "conn_enet0_root_clk"; 18 compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a"; 20 interrupt-parent = <&gic>; [all …]
|
H A D | imx8-ss-conn.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright 2018-2019 NXP 7 #include <dt-bindings/clock/imx8-lpcg.h> 8 #include <dt-bindings/firmware/imx/rsrc.h> 11 compatible = "simple-bus"; 12 #address-cells = <1>; 13 #size-cells = <1>; 16 conn_axi_clk: clock-conn-axi { 17 compatible = "fixed-clock"; 18 #clock-cells = <0>; [all …]
|
H A D | imx8-ss-audio.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright 2018-2019 NXP 7 #include <dt-bindings/clock/imx8-lpcg.h> 8 #include <dt-bindings/firmware/imx/rsrc.h> 11 compatible = "simple-bus"; 12 #address-cells = <1>; 13 #size-cells = <1>; 16 audio_ipg_clk: clock-audio-ipg { 17 compatible = "fixed-clock"; 18 #clock-cells = <0>; [all …]
|
H A D | imx8dxl.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 6 #include <dt-bindings/clock/imx8-clock.h> 7 #include <dt-bindings/firmware/imx/rsrc.h> 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/input/input.h> 11 #include <dt-bindings/pinctrl/pads-imx8dxl.h> 12 #include <dt-bindings/thermal/thermal.h> 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; [all …]
|
H A D | imx8-ss-img.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright 2019-2021 NXP 7 compatible = "simple-bus"; 8 #address-cells = <1>; 9 #size-cells = <1>; 12 img_ipg_clk: clock-img-ipg { 13 compatible = "fixed-clock"; 14 #clock-cells = <0>; 15 clock-frequency = <200000000>; 16 clock-output-names = "img_ipg_clk"; [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/bus/ |
H A D | fsl,imx8qxp-pixel-link-msi-bus.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Liu Ying <victor.liu@nxp.com> 16 clock and reset through the i.MX8 Distributed Slave System Controller (DSC). 18 i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks, 19 that is, MSI clock and AHB clock, need to be enabled so that peripherals 35 - $ref: simple-pm-bus.yaml# 37 # We need a select here so we don't match all nodes with 'simple-pm-bus'. [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/firmware/ |
H A D | fsl,scu.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Dong Aisheng <aisheng.dong@nxp.com> 13 The System Controller Firmware (SCFW) is a low-level system function 14 which runs on a dedicated Cortex-M core to provide power, clock, and 17 The AP communicates with the SC using a multi-ported MU module found 26 const: fsl,imx-scu 28 clock-controller: 30 Clock controller node that provides the clocks controlled by the SCU [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/iio/adc/ |
H A D | nxp,imx8qxp-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/nxp,imx8qxp-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: NXP IMX8QXP ADC 10 - Cai Huoqing <caihuoqing@baidu.com> 13 Supports the ADC found on the IMX8QXP SoC. 17 const: nxp,imx8qxp-adc 28 clock-names: 30 - const: per [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/mfd/ |
H A D | fsl,imx8qxp-csr.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Liu Ying <victor.liu@nxp.com> 17 use-case is for some other nodes to acquire a reference to the syscon node 18 by phandle, and the other typical use-case is that the operating system 23 pattern: "^syscon@[0-9a-f]+$" 27 - enum: 28 - fsl,imx8qxp-mipi-lvds-csr [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/dsp/ |
H A D | fsl,dsp.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Daniel Baluta <daniel.baluta@nxp.com> 11 - Shengjiu Wang <shengjiu.wang@nxp.com> 15 advanced pre- and post- audio processing. 20 - fsl,imx8qxp-dsp 21 - fsl,imx8qm-dsp 22 - fsl,imx8mp-dsp 23 - fsl,imx8ulp-dsp [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/sound/ |
H A D | fsl,asrc.txt | 4 signal associated with an input clock into a signal associated with a different 5 output clock. The driver currently works as a Front End of DPCM with other Back 11 - compatible : Compatible list, should contain one of the following 13 "fsl,imx35-asrc", 14 "fsl,imx53-asrc", 15 "fsl,imx8qm-asrc", 16 "fsl,imx8qxp-asrc", 18 - reg : Offset and length of the register set for the device. 20 - interrupts : Contains the spdif interrupt. 22 - dmas : Generic dma devicetree binding as described in [all …]
|
/openbmc/linux/drivers/clk/imx/ |
H A D | clk-imx8qxp-lpcg.c | 1 // SPDX-License-Identifier: GPL-2.0+ 7 #include <linux/clk-provider.h> 16 #include "clk-scu.h" 17 #include "clk-imx8qxp-lpcg.h" 19 #include <dt-bindings/clock/imx8-clock.h> 22 * struct imx8qxp_lpcg_data - Description of one LPCG clock 23 * @id: clock ID 24 * @name: clock name 25 * @parent: parent clock name 26 * @flags: common clock flags [all …]
|
H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0 2 # common clock support for NXP i.MX SoC family. 4 tristate "IMX clock" 67 tristate "IMX8MM CCM Clock Driver" 71 Build the driver for i.MX8MM CCM Clock Driver 74 tristate "IMX8MN CCM Clock Driver" 78 Build the driver for i.MX8MN CCM Clock Driver 81 tristate "IMX8MP CCM Clock Driver" 85 Build the driver for i.MX8MP CCM Clock Driver 88 tristate "IMX8MQ CCM Clock Driver" [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/display/bridge/ |
H A D | fsl,imx8qxp-pixel-combiner.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Liu Ying <victor.liu@nxp.com> 23 - fsl,imx8qm-pixel-combiner 24 - fsl,imx8qxp-pixel-combiner 26 "#address-cells": 29 "#size-cells": 38 clock-names: [all …]
|
H A D | fsl,imx8qxp-ldb.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Liu Ying <victor.liu@nxp.com> 41 - fsl,imx8qm-ldb 42 - fsl,imx8qxp-ldb 44 "#address-cells": 47 "#size-cells": 52 - description: pixel clock [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/phy/ |
H A D | mixel,mipi-dsi-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/phy/mixel,mipi-dsi-phy.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Guido Günther <agx@sigxcpu.org> 13 The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the 14 MIPI-DSI IP from Northwest Logic). It represents the physical layer for the 18 in either MIPI-DSI PHY mode or LVDS PHY mode. 23 - fsl,imx8mq-mipi-dphy 24 - fsl,imx8qxp-mipi-dphy [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/serial/ |
H A D | fsl-lpuart.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Fugang Duan <fugang.duan@nxp.com> 13 - $ref: rs485.yaml# 14 - $ref: serial.yaml# 19 - enum: 20 - fsl,vf610-lpuart 21 - fsl,ls1021a-lpuart [all …]
|