|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
16c2dd96 |
| 01-Apr-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
...
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.23 |
|
| #
ea16e637 |
| 22-Mar-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
16c2dd96 |
| 01-Apr-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
...
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.23 |
|
| #
ea16e637 |
| 22-Mar-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
16c2dd96 |
| 01-Apr-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
...
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.23 |
|
| #
ea16e637 |
| 22-Mar-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
16c2dd96 |
| 01-Apr-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
...
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.23 |
|
| #
ea16e637 |
| 22-Mar-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
16c2dd96 |
| 01-Apr-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
...
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.23 |
|
| #
ea16e637 |
| 22-Mar-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
16c2dd96 |
| 01-Apr-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
...
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.23 |
|
| #
ea16e637 |
| 22-Mar-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
16c2dd96 |
| 01-Apr-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
...
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.23 |
|
| #
ea16e637 |
| 22-Mar-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
16c2dd96 |
| 01-Apr-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
...
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.23 |
|
| #
ea16e637 |
| 22-Mar-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
16c2dd96 |
| 01-Apr-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
...
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.23 |
|
| #
ea16e637 |
| 22-Mar-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
16c2dd96 |
| 01-Apr-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
...
arm64: dts: imx8-ss-conn: fix usb lpcg indices
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.23 |
|
| #
ea16e637 |
| 22-Mar-2024 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]
The actual clock show wrong frequency:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 166000000 Hz
^^^^^^^^^
.....
According to
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>, <&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
}
"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.
After correct clocks order:
echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control
cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 198000000 Hz
^^^^^^^^
...
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40 |
|
| #
6b15a78f |
| 21-Jul-2023 |
Alexander Stein <alexander.stein@ew.tq-group.com> |
arm64: dts: imx8: conn: Fix reg order for USB3 controller
Cadence USB3 bindings specify a specific reg order. Adjust DT entries
to match the bindings.
Signed-off-by: Alexander Stein <alexander.stei
arm64: dts: imx8: conn: Fix reg order for USB3 controller
Cadence USB3 bindings specify a specific reg order. Adjust DT entries
to match the bindings.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
|
Revision tags: v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29 |
|
| #
0f554e37 |
| 15-May-2023 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
Resolve USB 3.0 gadget failure for QM and QXPB0 in super speed mode with
single IN and OUT endpoints, like mass storage devi
arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
Resolve USB 3.0 gadget failure for QM and QXPB0 in super speed mode with
single IN and OUT endpoints, like mass storage devices, due to incorrect
ACTUAL_MEM_SIZE in ep_cap2 (32k instead of actual 18k). Implement dt
property cdns,on-chip-buff-size to override ep_cap2 and set it to 18k for
imx8QM and imx8QXP chips. No adverse effects for 8QXP C0.
Cc: stable@vger.kernel.org
Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to composite EP number")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
|
Revision tags: v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22 |
|
| #
a8bd7f15 |
| 27-Mar-2023 |
Frank Li <Frank.Li@nxp.com> |
arm64: dts: imx8qxp: add cadence usb3 support
There are cadence usb3.0 controller in 8qxp and 8qm.
Add usb3 node at common connect subsystem.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-b
arm64: dts: imx8qxp: add cadence usb3 support
There are cadence usb3.0 controller in 8qxp and 8qm.
Add usb3 node at common connect subsystem.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
|
Revision tags: v6.1.21 |
|
| #
276dd9a6 |
| 22-Mar-2023 |
Peng Fan <peng.fan@nxp.com> |
arm64: dts: imx8: update usb compatible
Update usb compatible per binding doc
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230322052504.2629429-7-peng.fan@oss.nxp.co
arm64: dts: imx8: update usb compatible
Update usb compatible per binding doc
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230322052504.2629429-7-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1 |
|
| #
06acb824 |
| 10-Oct-2022 |
Peng Fan <peng.fan@nxp.com> |
arm64: dts: imx8: correct clock order
Per bindings/mmc/fsl-imx-esdhc.yaml, the clock order is ipg, ahb, per,
otherwise warning: "
mmc@5b020000: clock-names:1: 'ahb' was expected
mmc@5b020000: clock-
arm64: dts: imx8: correct clock order
Per bindings/mmc/fsl-imx-esdhc.yaml, the clock order is ipg, ahb, per,
otherwise warning: "
mmc@5b020000: clock-names:1: 'ahb' was expected
mmc@5b020000: clock-names:2: 'per' was expected "
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|