/openbmc/linux/arch/powerpc/boot/dts/ |
H A D | kmeter1.dts | 161 0 15 2 0 1 0 /* RX_DV */ 187 0 29 2 0 1 0 /* RX_DV */ 208 1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */ 228 3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */ 246 3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */ 264 4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */ 282 4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */
|
H A D | mpc832x_rdb.dts | 191 0 28 2 0 1 0 /* RX_DV */ 211 1 10 2 0 1 0 /* RX_DV */
|
/openbmc/linux/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ |
H A D | pincfg.txt | 50 0 f 2 0 1 0 /* RX_DV */
|
/openbmc/u-boot/board/freescale/mpc8568mds/ |
H A D | mpc8568mds.c | 44 {4, 16, 2, 0, 2}, /* RX_DV */ 69 {5, 16, 2, 0, 2}, /* RX_DV */
|
/openbmc/linux/arch/powerpc/boot/dts/fsl/ |
H A D | mpc8568mds.dts | 146 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ 174 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
|
/openbmc/linux/Documentation/devicetree/bindings/net/ |
H A D | ti,dp83867.yaml | 103 This denotes the fact that the board has RX_DV/RX_CTRL pin strapped in
|
/openbmc/u-boot/board/keymile/km83xx/ |
H A D | km83xx.c | 47 {1, 26, 2, 0, 1}, /* RX_DV */ 88 {1, 28, 2, 0, 1}, /* Rx_DV */
|
/openbmc/linux/drivers/net/dsa/sja1105/ |
H A D | sja1105_clocking.c | 438 pad_mii_rx.ctrl_ih = 0; /* RX_DV/CRS_DV/RX_CTL and RX_ER */ in sja1105_cfg_pad_rx_config() 441 pad_mii_rx.ctrl_ipud = 3; /* RX_DV/CRS_DV/RX_CTL and RX_ER */ in sja1105_cfg_pad_rx_config() 801 /* Internally pull down the RX_DV/CRS_DV/RX_CTL and RX_ER inputs */ in sja1105_clocking_setup_port()
|
/openbmc/u-boot/board/freescale/mpc832xemds/ |
H A D | mpc832xemds.c | 61 {1, 28, 2, 0, 1}, /* Rx_DV */
|
/openbmc/u-boot/board/freescale/mpc8323erdb/ |
H A D | mpc8323erdb.c | 60 {0, 28, 2, 0, 1}, /* Rx_DV */
|
/openbmc/u-boot/board/freescale/mpc8555cds/ |
H A D | mpc8555cds.c | 75 /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
|
/openbmc/u-boot/board/freescale/mpc8541cds/ |
H A D | mpc8541cds.c | 77 /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
|
/openbmc/linux/drivers/net/phy/ |
H A D | dp83867.c | 758 /* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */ in dp83867_config_init()
|
/openbmc/u-boot/board/ti/am335x/ |
H A D | board.c | 731 * As jumper line is overridden by PHY RX_DV pin immediately in board_init()
|
/openbmc/linux/drivers/net/ethernet/atheros/ |
H A D | ag71xx.c | 142 #define FIFO_CFG4_DV BIT(1) /* RX_DV Event */ 168 #define FIFO_CFG5_DV BIT(1) /* RX_DV Event */
|
/openbmc/linux/drivers/pinctrl/renesas/ |
H A D | pfc-r8a7740.c | 1917 /* RXD[0:3], RX_CLK, RX_DV, RX_ER 1933 /* RXD[0:7], RX_CLK, RX_DV, RX_ER
|